Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 43 for “"copper diffusion"”.
-
Copper diffusion in silicon
Diffusion processes have always been one of the major subjects of solid state science, either due to technological interest or pure scientific curiosity. Because of its technological importance in devices [1] Cu diffusion studies are some of the oldest in semiconductor materials, in particular …
-
Fundamental studies of copper diffusion barriers
Copper diffusion barriers are necessary to contain copper within microelectronics interconnect wiring, preventing copper diffusion to the underlying silicon transistors. Both conducting and insulating copper diffusion barriers are used to encapsulate copper wiring, with low resistivity and …
-
Fabrication and characterisation of copper diffusion barrier layers for future interconnect applications
… characterisation of ultra-thin self-forming Cu diffusion barrier layers for future interconnect technologies. These barrier layers form by the chemical interaction of an expelled metal from a copper alloy with the surface of a dielectric material to form a stable chemical species suitable for …
-
Copper diffusion in In2S3 and charge separation at In2S3/CuSCN and TiO2/In2S3 interfaces
… by the deposition parameters, band alignment and diffusion of Cu from CuSCN into In2S3, which was the focus of this work. TiO2 nanoparticles were screen printed onto SnO2:F (FTO)-coated glass substrates to give a layer of nanoporous (np) TiO2. In2S3 layers were deposited by thermal evaporation or …
-
Study of Ruthenium and Ruthenium Oxide's Electrochemical Properties and Application as a Copper Diffusion Barrier
As a very promising material of copper diffusion barrier for next generation microelectronics, Ru has already obtained a considerable attention recently. In this dissertation, we investigated ruthenium and ruthenium oxide electrochemical properties and the application as a copper diffusion barrier. …
-
Copper diffusion through plated nickel barrier layers for laser-doped selective-emitter silicon solar cells
… and photovoltaic devices to prevent copper diffusion from metal contacts to the underlying silicon. This thesis compares the effectiveness of nickel barrier layers, formed using: (i) electroless plating; and (ii) light-induced plating (LIP), in preventing copper diffusion into …
-
Atomic layer deposition and properties of refractory transition metal-based copper-diffusion barriers for ULSI interconnect
… including metal contacts, adhesion layers, and diffusion barriers. The diffusion barrier application has become crucial for the integration of copper as the choice conductor in ultra-large scale integrated (ULSI) circuit interconnect. The refractory metal tantalum has been used commercially in …
-
Deposition and properties of Co- and Ru-based ultra-thin films
Future copper interconnect systems will require replacement of the materials that currently comprise both the liner layer(s) and the capping layer. Ruthenium has previously been considered as a material that could function as a single material liner, however its poor ability to prevent copper …
-
Deposition and characterization of thin films for applications in ULSI fabrication
… ISS to measure the reduction kinetics of a thin copper oxide (Cu2O) film. Third, research efforts were focused on deposition and characterizations of a thin ruthenium film as a new copper diffusion barrier for ultra-large scale integrated circuit (ULSI) interconnect. A thermal chemical vapor …
-
Interfacial Electrochemistry and Surface Characterization: Hydrogen Terminated Silicon, Electrolessly Deposited Palladium & Platinum on Pyrolyzed Photoresist Films and Electrodeposited Copper on Iridium
… candidate for investigation as a new generation copper diffusion barrier for the IC industry. Copper electrodeposition on iridium is studied to address the potential of iridium as a copper diffusion barrier. Copper electrodeposition is studied using a current-transient technique to obtain insight …
-
Thermal Stability of Barrier Layers for Copper Metallization
… and performance of the circuit. Hence, copper has replaced aluminum as the interconnect metal due to its high conductivity and superior resistance to electromigration. However, copper is a fast diffuser in silicon and exists in a dissolved state as well as in the form of precipitates …
-
Electron and soft x-ray spectroscopy of indium sulfide buffer layers and the interfaces in Cu(In,Ga)(S,Se)2-based thin-film solar cells
… enhanced solar cell performance, a significant copper diffusion from the absorber into the buffer layer takes place due to the thermal treatment. Accordingly, the impact of the copper diffusion on the hidden InxSy/CISSe interface was discussed and for x = 40.2% a significant cliff (downwards …
-
The behaviour of copper on gallium arsenide
Copper is reported to diffuse at a high rate in GaAs (2.6 x 10⁻⁵ cm² s⁻¹ at 600°C). Dislocations and grain boundaries are expected to be preferential diffusion paths for copper diffusion at low temperatures. The present investigation was undertaken to establish to what extent preferential diffusion …
-
Electrodeposition of Copper on Ruthenium Oxides and Bimetallic Corrosion of Copper/Ruthenium in Polyphenolic Antioxidants
Copper (Cu) electrodeposition on ruthenium (Ru) oxides was studied due to important implications in semiconductor industry. Ruthenium, proposed as the copper diffusion barrier/liner material, has higher oxygen affinity to form different oxides. Three different oxides (the native oxide, reversible …
-
Modeling the effect of copper contamination on junction diodes and MOS capacitors
Copper in silicon is known to have detrimental effects on silicon devices. Therefore, understanding how copper affects device performance and how copper is distributed in semiconductor device regions are essential pieces of information that are required in order to eliminate copper contamination. …
-
Experimental Studies of Bulk Optically Controlled GaAs Switches Utilizing Fast Infrared Quenching
… dissertation describes some of the properties of copper-compensated, silicon-doped GaAs (Cu:Si:GaAs) with the purpose of demonstrating the feasibility of the Bulk Optically Controlled Switch (BOSS) concept. The BOSS concept involves the excitation of electrons or holes from selected deep centers …
-
Optical activation of copper in silicon studied by carrier lifetime measurements
In this work copper in silicon is studied by means of the microwave photoconductive decay technique. The motivation of this work is to develop a solution for the quantitative measurement of trace copper contamination in silicon using charge carrier lifetime measurements. The goal of this work is to …
-
Adherence/Diffusion Barrier Layers for Copper Metallization: Amorphous Carbon:Silicon Polymerized Films
… to its lower resistivity and electromigration. Copper diffuses into silicon dioxide under thermal and electrical stresses, requiring the use of barriers to inhibit diffusion, adding to the insulator thickness and delay time, or replacement of SiO2 with new insulator materials that can inhibit …
-
Improvements in thin film CdTe back contact and interface layers through sputter deposition of metals and semiconductor materials
… layer between the CdTe and metal back contact. Copper doping assists in the CdTe device performance, however too much copper can be detrimental to device performance. The ZnTe layer allows for better valence band alignment and limits copper diffusion. The device structure with ZnTe resulted in a …
-
Stability Study of Organic-inorganic Hybrid Perovskite Solar Cells
… as large absorption coefficient, long carrier diffusion length, solution processability, low temperature compatibility, low cost, and scalability. OIHPs have huge potential applications in solar cells, photodetectors, radiation detectors, and x-ray imaging. OIHP solar cells have been considered …
Page 1 of 3