Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 20 for “"copper-tungsten"”.
-
The deformation of copper-tungsten composites
<p>A series of plane strain compression experiments and finite element method (FEM) calculations were performed on continuous fibre composites to examine the role of volume fraction and fibre arrangement on the mechanical behaviour when the fibre axis was perpendicular to the loading direction. The …
-
Matrix Behavior in Copper - Tungsten Composites at Small Strains
Made available in DSpace on 2014-12-12T01:04:02Z (GMT). No. of bitstreams: 1 7206888.pdf: 2779494 bytes, checksum: f4a2dbbf6f9e8129b1731651dc4dd899 (MD5) Previous issue date: 1971
-
Free-edge singularity dominated zone in a copper-tungsten bimaterial, The
Includes bibliographical references (pages 67-74).
-
Barrel wear reduction in rail guns: the effects of known and controlled rail spacing on low voltage electrical contact and the hard chrome plating of copper-tungsten rail and pure copper rails
… rails were used in these experiments: 75-25 copper-tungsten, chromium-plated 75-25 Cu-W, and chromium-plated pure copper rails. Improving the control of rail spacing and parallelity did not ensure low-voltage electrical contact for our configurations. The largest damage was observed for …
-
The Metal-Organic Chemical Vapor Deposition of Cu(II)-bishexafluoroacetylacetonate on a Tungsten Substrate
… carbon-containing contamination products at the copper-tungsten (Cu-W) interface during the metal organic chemical vapor deposition (MOCVD) of copper on tungsten. Cu(II)bishexafluoroacetylacetonate [Cu(hfac)_2] was physisorbed onto lightly oxidized tungsten (WO_x) at 115K, under ultra-high vacuum …
-
Development of High Conductivity Copper Coatings for SRF Cavity
… was used to deposit bulk coatings of pure copper and copper-tungsten alloys on the niobium substrate and the samples of size 2 mm × 2 mm cross section were cut and subjected to annealing at various temperatures ranging from 300 ◦C to 1000 ◦C. Thermal conductivity and residual resistivity …
-
Arc current, voltage, and resistance in a high energy, gas-filled spark gap
… (304 Stainless Steel, ACF-IOQ Graphite, and 3w3 Copper-Tungsten), three gases (Air, N2, and SF6), and three gas pressures ( 1 , 2, and 3 atmospheres). Statistical analysis was performed on the resultant data. Essential results are: within the statistical and measurement errors, the resistance is …
-
Insulator Degradation by High Current Discharges
… have been tested with graphite, molybdenum, copper, and copper-tungsten electrodes. Typically, the ambient gas used in the tests was atmospheric air although some tests were conducted in pure nitrogen, pure oxygen, and admixtures thereof. Models have also been developed which predict hold off …
-
Anode material testing in a vacuum diode
… The test materials include stainless steel, copper tungsten, tantalum, nickel,molybdenum, and oxygen-free high-conductivity copper. For Nickel, two anodes are machined and given different treatments before operation in the sealed vircator. The first being a high temperature bake-out under …
-
Voltage recovery studies for a high energy spark gap
… , and mixtures of these as filler gases and with copper-tungsten, stainless steel, and graphite electrodes. The goal of the work was to determine the main parameters affecting the free recovery (no gas flow) of the spark gap. The percentage voltage recovery of a spark gap was measured by applying …
-
Thermal management of discretized heaters using CuW microchannel heat sinks and FC3283 for laser diode applications
… bars. This study examined the effectiveness of a copper tungsten (CuW) microchannel heat sink paired with a dielectric coolant (FC3283) for dissipating both discrete and uniform heat fluxes up to 600 W/cm2 across a 0.25 cm2 surface area through a numerical and experimental study. CuW was chosen as …
-
Materials selection and evaluation of Cu-W particulate composites for extreme electrical contacts
… were obtained and evaluated. These included copper-tungsten W-Cu, "self-lubricating" graphite-impregnated Cu, and Gr-W-Cu composites with different volume fractions of the constituents. The structure-property relations were determined through mechanical and electrical resistivity testing. A …
-
Anamorphic Preclinical SPECT Imaging with High-Resolution Silicon Double-Sided Strip Detectors
… aperture with two sets of movable, keel-edged copper-tungsten blades configured as crossed (skewed) slits. These apertures can be positioned independently between the object and detector, producing an anamorphic image in which the axial and transaxial magnications are not constrained to be …
-
Analysis of Electromagnetic Launcher Design and Modeling
… much circuit resistance. It was found that using copper tungsten for the rails ensures that the rails can withstand the arcing inflicted by the kilo-Ampere current along the rails very well compared to other materials. Also, the copper in the tungsten alloy ensures high conductivity while the …
-
The impact of field enhancements and charge injection on the pulsed breakdown strength of water
… materials including Aluminum, Molybdenum, Copper, Tungsten, Nickel, Stainless Steel, and Zinc Oxide, all of which had a constant surface area of 5 cm2, were also tested. The conductivity of the water was varied from 1 µS/cm to 38.5 µS/cm. Additionally, shadowgraph images of a point plane …
-
Heat transfer enhancement in two-phase microchannel heat exchangers for high heat flux electronics
… fluid passing through conduction coupled copper-tungsten channels. These heat exchangers have high thermal resistances which require the coolant to be significantly subcooled before entering the device. High working fluid flow rates are required to reduce thermal gradients in the diode …
-
Electrodeposition of adherent copper film on unmodified tungsten.
… pulses of 10 s duration were visible to the eye, copper colored, and survived a crude test called "the Scotch tape test", which stick the scotch tape on the sample, then peel off the tape and see if the copper film peels off or not. Characterization by scanning electron microscopy (SEM), energy …
-
Reprocessing of the Cantung Mine Tailings
… tests were completed in an attempt to recover copper and tungsten in the tailings not recovered during the mine’s operation. Both metals were unable to be recovered at high grades, with further research required to determine appropriate recovery methods. The findings of this thesis demonstrate …