Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 17 of 17 for “"corbels"”.
-
Behaviour of corbels reinforced with headed-end GFRP bars
Steel-reinforced concrete (RC) corbels are commonly found in bridges, industrial buildings, and parking structures throughout North America. Corbels are structural elements with low shear span-to-depth ratio that transfer vertical and horizontal loads to other members such as columns or walls. …
-
Behaviour of concrete corbels reinforced with GFRP bent bars
Steel-reinforced concrete (RC) corbels are one of the significant components in the precast buildings and superstructure of bridges, and they are used for load transfer from girders or slabs to columns. In North America, such elements are exposed to harsh weather, which makes them more susceptible …
-
Face Value: An Iconographic Analysis of the Corbels of Chartres Cathedral
The numerous figurated corbels of Chartres Cathedral were inscribed with semiotic content. Works in this genre were formerly disregarded by researchers because of their perceived lack of meaning. Trends in modern scholarship have challenged this misconception, and recent technological innovations …
-
Investigation of corbels designed according to strut-and-tie and empirical methods
Corbels are short, typically shear-controlled, cantilevers that transfer loads to columns in structures. Currently, ACI 318-14 provisions allow the structural design of shear-controlled corbels through either an empirical design method or the strut-and-tie method (STM). The objective of this thesis …
-
Tests and definition of maximum shear capacity of reinforced concrete structures
… shear strength of concrete structures, such as corbels, deep beams, dapped ends and wall beams, which are subjected to predominant shear forces.
-
FRP STRENGTHENING OF NON-FLEXURAL REINFORCED CONCRETE MEMBERS BASED ON STRUT-AND-TIE MODELLING
… members and strut members. A case study of RC corbels strengthened with FRP systems based on strut-and-tie modelling was also conducted.
-
Efficient precast/prestressed floor system for building construction
… of standard precast beams, and use of column corbels and beam ledges. This research presents the development of a new precast concrete floor system that eliminates the limitations of conventional precast floor system and provides a competitive precast alternative to cast-in-place flat slab …
-
ΜΟΝΤΕΛΟ ΠΕΠΕΡΑΣΜΕΝΩΝ ΣΤΟΙΧΕΙΩΝ ΓΙΑ ΤΗΝ ΑΝΑΛΥΣΗ ΔΙΣΚΩΝ ΟΠΛΙΣΜΕΝΟΥ ΣΚΥΡΟΔΕΜΑΤΟΣ ΥΠΟ ΜΟΝΟΤΟΝΗ ΚΑΤΑΠΟΝΗΣΗ ΜΕΧΡΙΣ ΑΣΤΟΧΙΑΣ
… STRUCTURAL ELEMENTS SUCH AS BEAMS, SHEAR WALLS, CORBELS, SLENDER AND SHORT COLUMNS ETC.
-
Improved prediction methods for finned tube bundle heat exchangers in crossflow
… that allowed differing wall sealing devices (corbels) to be used, or allow a bypassing lane. Flow visualization tests were performed on this bundle, and observations of the flow patterns compared with a simple two-dimensional CFD model. From the test results a new method of predicting the …
-
Diagonal cracking in reinforced concrete deep beams : an experimental investigation
… Canadian Code [5] stipulates that deep beams and corbels should be designed using the Strut-and-Tie Method. This method incorporates the work done by Collins and Mitchell [8][9] where the cracked concrete behaves as a new material and that the compressive strength of concrete is reduced due to …
-
A morphological study of some North American Sitona (Coleoptera: Curculionidae)
… appendages were limited to setae, pollexes, and corbels. These variations, though not too distinctive, appeared specifically consistent. Pollex variation within a species seemed correlated with sex and may well serve as a sex index. Variation of eye size within the genus was relatively large, but …
-
Modeling and behavior of prestressed concrete spandrel beams.
… beams (or double tees) on ledges, spot corbels, or pockets, all of which introduce lateral eccentricity as the double tee loads are transferred to the spandrels. Upon connecting the spandrels to the double tees using deck ties, these connections serve as lateral restraints for the …
-
Low-damage gravity rocking connection for multi-storey moment frame buildings
… thus avoiding beam-elongation altogether. Corbels on the columns support the beams and generate resistance and self-centring through rocking under the influence of gravity. Supplemental friction sliders at the top of the beams resist sliding of the floor whilst dissipating energy as the …
-
Reuse as a Sustainable Construction Approach for Heritage Conservation in Mosul, Iraq.
… indicates high deconstruction potential for corbels and corners (70.02%, 68.40%); windows, arches, friezes, Madamic, and entrances fall within the medium category. The study contributes a standardised, replicable documentation and diagnostic framework, with indicators for evaluating …
-
Volte Tardogotiche sarde: disegno, misura, materia
… that most characterize keystones, capitals and corbels.
-
Η αρχιτεκτονική του Μοναστηρίου (Βιτώλια): εθνοτική συνύπαρξη και αστικοί μετασχηματισμοί (1863-1912)
… (pediments, cornices, balustrades, geisipodes, corbels, etc) served as the manufacturing technology and the wide dissemination of new materials, mainly of brick and ironThe relation between the uses with rhythmologic study of buildings gives one initial interpretation of the choice of ground …
-
Reducing Thermal Bridging and Understanding Second-Order Effects in Concrete Sandwich Wall Panels
Structural engineers have traditionally detailed structures with structural and fabrication efficiency in mind, but often based on a limited understanding of thermal efficiency. Some connection designs can create significant thermal bridging, leading to unnecessary heat transfer and even premature …