Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 200 for “"corrosion behaviour"”.
-
Electrochemical corrosion behaviour of nanostructured bainitic steel
… steels can influence their general and localized corrosion susceptibility. In this study, the corrosion behaviour of nanostructured bainitic steel was compared with the well-known martensitic steel in chloride-containing solution using electrochemical techniques such as electrochemical impedance …
-
Corrosion Behaviour of AGR Simulated Fuels (SIMFUELs)
… subsequently the UO2 fuel pellets, initiating corrosion on either one or both elements of the SNF. At this failure point, most β/γ radiation will have decayed away, with just α-radiation remaining, initiating the process of the α-radiolysis of water. Alpha-radiolysis of the invading groundwater …
-
Corrosion Behaviour of Proprietary Micro-alloyed Steels
… However, carbon steels are susceptible to corrosion attack particularly in harsh oilfield environments thus affecting the capital expenditure (CAPEX), operational expenditure (OPEX) and health, safety and environment (HSE). Regardless of these disadvantages, carbon steel still remains the …
-
Investigation of erosion-corrosion behaviour of pump materials
A novel erosion-corrosion approach, that expands the assessment of damage occurring on engineering materials subjected to a submerged impingement jet, has been developed. This new analytical method yields quantitative data that facilitates a substantially improved understanding of the material …
-
The erosion-corrosion behaviour of copper-nickel alloys
… focuses on an investigation of the erosion-corrosion behaviour of Cu-Ni-base alloys in aqueous environments. The principal objectives of the research were to examine the fundamental mechanisms of the erosion-corrosion attack. The work was focused on a standard Cu-10%Ni alloy that is used …
-
The corrosion behaviour of aluminium alloy B206 in seawater
… been known to perform adversely due to its poor corrosion resistance. Thus corrosion has been identified as one of the major issues that jeopardizes the long-term use and performance of B206. The corrosion behaviour of B206 in seawater is studied through immersion testing and electrochemical …
-
Investigation of Corrosion Behaviour of FeCoNiAlTa Shape Memory Alloy
… such as actuators and pipe couplings. The corrosion behaviour of this alloy since is mostly unknown. The SMA was tested by means of electrochemical methods in 0.6 molar (M) NaCl solution at four different temperatures (25 oC, 40 oC, 60 oC, and 80 oC) and three levels of solution pH (3, 6, …
-
Corrosion behaviour of X65 carbon steel under flowing conditions
… of the influence of flow conditions on the corrosion behaviour of X65 carbon steel in CO2 saturated environments. An assessment of both the corrosion behaviour of uncovered and film-covered surfaces of X65 is made under different flow conditions. All the experiments under flowing conditions …
-
Corrosion Behaviour of Advanced Fe-Based Bulk Metallic Glasses
… Fe-Cr(-Mo)-metalloid(s), exhibit extraordinary corrosion resistance, but low glass formation ability (GFA). Newly developed bulk glass-forming Fe-based alloys have on the contrary high GFA, but also very different compositions and therefore their corrosion behaviour is expectedly not similar. …
-
Localized Corrosion Behaviour of Cu-lean AA 7003 Extrusions
… relationships involved with the intergranular corrosion and exfoliation corrosion of Cu-lean AA7003 alloy extrusions, as a function of the heat-treated condition. The heat treatments of interest in this study include the naturally-aged T4 condition, representing the as-extruded condition, an …
-
Corrosion behaviour of AZ31 magnesium alloy in highly alkaline environments
… often poses issues related to undesirable corrosion, or degradation of exposed surfaces. The chemical reactivity of Mg can be also exploited, and as a result Mg alloys often find use as anode materials for fuel cells. However, due to a long term immersion of the anodes in highly alkaline …
-
Corrosion behaviour of nickel and monel in aqueous fluoride media.
The corrosion behaviour of nickel and monel in aqueous fluoride solutions was studied by potentiostatic polarization techniques and surface examination of the corroded specimens. Nickel does not exhibit the usual active-passive transition for 0 < pH < 4.0 but corrodes rapidly especially at the …
-
Corrosion Behaviour of Zinc Alloy Coated Steel Fasteners in Timber
The corrosion behaviour of a wide range of zinc and zinc alloy coated steels (hot-dip galvanised and electrodeposited), with or without a conversion coating treatment, in timber environments has been investigated using electrochemical measurement and SEM/EDXA analysis. The corrosion tests were …
-
Corrosion behaviour of ferritic stainless steels in H2/H2O environments
… for the system, one being the high temperature corrosion of metal components in the electrolysis cell. During the thesis work, potential steels for use in SOEC have been exposed in simulated fuel side electrolysis environments (H2/H2O), with varying degrees of argon gas dilution. The work found …
-
Corrosion and trib-corrosion behaviour of metallic orthopaedic implant materials
… of medical implants into human bodies, corrosion and wear have been regarded as key issues for their long-term durability. There has been a recent renewed interest in the use of large diameter metal-on-metal (MoM) hips, primarily because of the reduced volumetric wear compared with the …
-
Corrosion behaviour of austenitic steels in basic thiosulfate gold leaching environments
… major issue if not addressed; particularly their corrosion resistance. Therefore, understanding the corrosion behaviour of materials of construction, such as stainless steels, in this medium is critical to the future development and acceleration of industrial implementation of this new technology. …
-
Crevice corrosion behaviour of nickel based alloys in neutral chloride solutions
Crevice corrosion experiments have been conducted on Inconel 600 and Inconel 625 exposed to two principle test solutions of 1 M NaCl and 1 M NaCl + 0.01 M Na₂S₂0₃ (Sodium Thiosulphate) at three temperatures, 22°C, 55 °C and 80°C. The crevice corrosion tests were performed in a corrosion cell which …
Page 1 of 10