Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 112 for “"corrosion current"”.
-
A study of crack initiation in corrosion-fatigue of A.I.S.I 316 stainless steel by dynamic measurement of corrosion characteristics and corrosion current transients
… has been developed and applied to monitor corrosion current transients, in phase with a cyclic stress. applied in reverse bending at 24 Ez to AISI 316 stainless steel plate immersed in selected aqueous media. The amplitude and waveform of this fluctuating current component, together with …
-
Elektrocheminės paladžio korozijos tyrimas /
… is considered as a metal highly resistant to corrosion, the understanding of its corrosion and anodic behavior is incomplete. In this study the values of important electrochemical corrosion parameters such as corrosion potential, corrosion current density, and polarization resistance were …
-
Electrochemically Deposited Metal Alloy-silicate Nanocomposite Corrosion Resistant Materials
… ?-phase silicate and copper-nickel silicate corrosion resistant coatings have been prepared via electrochemical methods to improve currently available corrosion resistant materials in the oil and gas industry. A layered silicate, montmorillonite, has been incorporated into the coatings for …
-
Electrochemical Properties of Rhodium-Plated Esthetic Orthodontic Archwires
… Wire, exists in the literature with no tests of corrosion through electrochemical testing. The objective of this research is to analyze how rhodium plating affects the electrochemical properties of nickel-titanium (NiTi) orthodontic wires. Methods: Rhodium-plated NiTi orthodontic wires (Iconix …
-
Effect of Alloying with Palladium on the Corrosion Behavior of CoCr and NiCr Dental Alloys
… however, particularly its biocompatibility and corrosion properties. The objective of this study was to evaluate the corrosion properties of two new Co Pd Cr and one new NiPdCr alloy and compare them to traditional CoCr and NiCr alloys. The casting alloys investigated were: CoPdCr (Noble Crown …
-
Influence of Reinforcing Steel Parameters on the Formation of the Passive Layer
Corrosion in reinforced concrete bridge decks has always been a concern amongst engineers. However, as structures continue to increase in size and in the amount of reinforcement present, consideration must be given to parameters such as the clear spacing arrangements between bars, the presence and …
-
Assessment of Commercial Corrosion Inhibiting Admixtures for Reinforced Concrete
Corrosion of reinforcing steel in concrete exposed to chloride-laden environments is a well-known and documented phenomenon. The need for cost effective systems for protection against corrosion has become increasingly clear since the first observations of severe corrosion damage to interstate …
-
Development of an abiotic laboratory screening test for microbially influenced corrosion
… (ALST) was developed that replicated the major corrosion-causing characteristics of several natural biotic environments. The natural biotic environments replicated were a Delaware Bay seawater site, an Arizona well-water system and a Tennessee River fresh-water system. The ALST was designed to …
-
Determining effect of cementitious repair materials on embedded steel reinforcement exposed to chloride environment using electrochemical NDT methods
… to construct buildings all around the globe. Corrosion-affected RC structures may lose durability, possibly reducing life expectancy or failing catastrophically if timely action is not taken. Critical content of chloride accumulated at the rebar-concrete interface may break the protective …
-
Use of the Genetic Algorithm in Positioning Sacrificial Anodes for Optimum Cathodic Protection
… to maximize the difference between the minimum current density supplied by sacrificial anodes on the surface of the cathodic materials and its free corrosion current density. The numerical tools used in this design methodology are the finite element analysis and the genetic algorithm. The former …
-
Efeitos do tratamento superficial da sílica ativa com soluções de ácidos nítrico e fosfórico em propriedades do concreto
… mechanical strength, permeability and chloride corrosion were evaluated. To that end, a statistical analysis was carried out and empirical models that correlate studied parameters (pH, acid and cement) with concrete properties were established. The quality of the models was tested by variance …
-
Estudo da corrosão no aço carbono 1020 protegido com óleo de coco saponificado: análise físico-química do comportamento químico do tensoativo
Corrosion inhibitors in solution are utilized to minimize processes from corrosion in steel. Of the present dissertation was evaluated the efficiency by inhibition from the surfactant saponified coconut oil (OCS) in the carbon steel 1020 through in linear polarization electrochemistry technique, …
-
Ανθεκτικότητα οργανικών επικαλύψεων που περιέχουν αναστολείς διάβρωσης
… of organic coatings containing volatile corrosion inhibitors and their anticorrosive performance when applied to steel surfaces.The potential absorption ability of a volatile corrosion inhibitor (VpCI) on a chemically clean steel surface was initially investigated. The VpCI contained, as …
-
Contribuição ao estudo do microconcreto de alto desempenho com adição de hidróxido de Sódio e Sacarose
… electrical resistivity, electrical potential and corrosion current of the high strength micro concrete were studied. It was added simultaneously in each composition the fixed percentage 3% of superplastifier and of 10% of active silica. This percentage was related to the agglomerative mass. The …
-
Synthesis of Novel Zinc Anode via Electroplating for Rechargeable Hybrid Aqueous Batteries
… the high energy density and long lifespan. The current lithium-ion batteries, however, hold a drawback as they utilize organic electrolytes. The use of organic electrolytes not only raises safety and environmental concerns, but also results in a higher manufacturing cost than would be with …
-
Evaluation of the Corrosion Behavior of High Nickel Alloys in Molten Nitrate Salt for Solar Thermal Applications
… required for increased efficiency and aggressive corrosion of molten salts. Exposure studies are a common way of testing the corrosion behavior of a material in situ but require the temperature of the molten salt to be maintained throughout the duration of the experiment which can be thousands of …
-
Intergranular Corrosion and Stress Corrosion Cracking of Extruded AA6005A
… focused on understanding the intergranular corrosion (IGC) and stress corrosion cracking (SCC) behavior of AA6005A aluminum extrusions is presented in this dissertation. The relationship between IGC and SCC susceptibility and the mechanisms of SCC in AA6005A extrusions were studied by …
-
Evaluation of corrosion inhibitors in chloride-contaminated reinforced concrete.
… to determine the effectiveness of commercial corrosion-inhibiting admixtures on the corrosion of reinforcing steel in chloride contaminated concrete. Domestic and foreign publications were reviewed to locate performance data and current practices related to the use, testing and evaluation of …
-
Modeling the Time-to Corrosion Cracking of the Cover Concrete in Chloride Contaminated Reinforced Concrete Structures
Significant factors on steel corrosion in chloride contaminated reinforced concrete and time-to-corrosion cracking were investigated in this study. Sixty specimens were designed with seven admixed chloride contents, three concrete cover depths, two reinforcing steel bar diameters, two exposure …
-
Sulfide stress cracking resistance of API-X100 high strength low alloy steel in H2S environments
… and alloying elements of the X100 on H2S corrosion and SSC susceptibility. The study was conducted by means of electrochemical polarization techniques and constant load (proof ring) testing. Microstructural analysis and electrochemical polarization results for X100were compared with those …
Page 1 of 6