Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 29 for “"corrosive attack"”.
-
Localised Corrosion of Austenitic Stainless Steels
… The effect of sensitisation upon subsequent corrosive attack has been investigated. A theoretical model based upon thermodynamic and kinetic considerations has been proposed to account for the observed experimental results.
-
MODELING OF ULTRASONIC INSPECTION METHODS FOR GENERATION IV REACTORS
… visual inspection, and the tendency for coolant corrosive attack. These challenges limit the feasibility and effectiveness of conventional ISI technologies. To overcome these challenges, acoustic methods that can operate under high temperature conditions are being actively considered in the U.S. …
-
The rate of dissolution of aluminum in hydrofluoric acid
… However, the resistance of pure aluminum to the attack of acids and many neutral solutions is higher than that of less pure aluminum or most of the aluminum-base alloys. For this reason, alclad alloy sheets, are made with a coating of pure aluminum on one or both sides of an aluminum alloy core. …
-
Analysis Of Ternary Chloride Salt Corrosion In High Nickel Alloys
… ternary chloride salt also exhibits high corrosive attack. Components of a chloride salt storage system would include piping, valves, tanks, pumps, receivers, and heat exchangers, which would be exposed to high temperatures and an extremely corrosive environment. In this paper we identify …
-
Corrosion performance of high damping alloys in 3.5% sodium chloride solution
… rate. Corrosion rate and the nature of corrosion attack were investigated for several high damping alloys based on the Cu-Mn, Fe-Cr-Al, Fe-Cr- Mo, and Cu-Zn systems in 3.5% NaCl solution. The results of Potentiodynamic polarization and polarization resistance measurements were compared with the …
-
Avaliação da corrosão em dutos por técnica gravimétrica e de resistência elétrica
… in the pipeline helps to identify the mechanism corrosive process. The internal monitoring of the corrosion in the pipelines was carried out between 2009 and 2010 using coupon weight loss and electrical resistance probe. Physico-chemical techniques of diffraction and fluorescence X-rays were used …
-
An X-ray diffraction investigation of infinity-Al2O3 addition to yttria stabilized zirconia (YSZ) thermal barrier coatings subject to destabilizing vanadium pentoxide (V2O5) exposure
… life from failure of YSZ coatings due to corrosive attack by vanadium and other combustion oxides. The object of this investigation was to determine the reactivity of adding alpha-Al203 to Current YSZ ceramics for creation of a ceramic composite which could improve mechanical properties …
-
Corrosion of Austenitic Stainless Steel
… did not show significant differences in corrosive attack.
-
Characterization of the corrosion behavior of high damping alloys in seawater.
Corrosion rates and the nature of corrosive attack were investigated for several high damping alloys, including alloys based on the Cu-Mn, Fe-Cr-Al, Fe-Cr-Mo, Ti-Ni, and Cu-Zn-Al systems. Rates and modes of attack were determined for exposure of samples in synthetic and natural seawater. The …
-
Functionality of laser deposited carbide coating on die/tool steel
… to protect die-casting die surfaces from the attack of molten aluminum. A number of different mechanisms such as corrosive attack and erosion by molten aluminum and oxidation of the die surface act to reduce the life of die casting dies. In view of this, the coating has been tested for …
-
Material Reliability for a Molten Chloride Salt System
… due pose a serious issue when it comes to high corrosive attack. Major loop components would be exposed to this environment like piping, valves, tanks, pumps, and heat exchangers. This study will go through a vi literature review of the best metal alloys for a molten chloride salt system, where …
-
Steady State Thermal Performance of a High Temperature Reactor Fuel Element
… which postulate the form and development of corrosive attack of the fuel channel and determine the thermal and hydraulic effects of such corrosion. Using all these methods detailed spatial and time dependent temperature distributions are determined for a single fuel element. Spatial …
-
The systematic study of corrosion and oxygen control by chemical scavenging agents
… a tremendous research effort to help minimize corrosive attack. One particular area that has received considerable attention is control of dissolved oxygen concentrations in operational and idle boiler systems. Numerous products and treatment schemes have been developed that have provided …
-
Environmentally friendly, rare earth-based inhibitors in conversion coatings and paint for the corrosion protection of aluminum alloys
… used to protect these aluminum alloys to corrosive attack. One type of coating, called a conversion coating, is a thin, inorganic film normally deposited directly on the bare metal surface. The other types of coatings, generically referred to as paints, include primers which are applied …
-
Correlating microstructure with the corrosion properties of Aluminum and Stainless Steel alloy
… the material’s susceptibility to degradation in corrosive environments. Susceptibility to, and mechanisms of, corrosion were investigated using multiscale electron microscopy techniques. The specific material systems studied were Aluminum alloy 5456 and additively manufactured (AM) stainless …
-
Brush plating of bearing alloys on aluminium alloy shells
… has led to increase in temperature, load and corrosive attack of plain bearings. To meet these requirements, overlay plated aluminium alloys are now preferred. Currently, lead-tin alloys are deposited using a zincate layer and nickel strike, as intermediate stages in the process. The nickel …
-
Understanding Degradation Mechanisms of Metallic Alloys in High-Temperature Molten Salt Environments
… loops in Molten Salt Reactors (MSRs) experience attack from molten salt by selective dissolution of active alloying elements. Thermodynamic calculations can be used to predict the extent to which alloys will suffer corrosive attack. The severity of attack can be controlled through the use of …
-
In situ stress measurements during anodic dissolution of cold spray AA6061 coating
… force/thickness evolution during exposure to corrosive solution was measured using curvature interferometry technique. The results showed that exposure to 3.5wt% NaCl solution is associated with development of large compressive stresses on the sample surface. Examination of the surface after …
-
Influence of welding variables on microbiologically influenced corrosion of austenitic stainless steel weldments
… for reasons not completely understood, corrosive attack in austenitic stainless steel usually takes the form of pitting at, or adjacent to, welds. It may be possible to avoid costly pitting failures if the weldment could be made less susceptible to MIC by proper selection of filler …
-
The history of corrosion technology (up to about the time of the First World War)
… served to increase the aggressive nature of the corrosive attack. These two factors combined to make industrialists fully aware of the magnitude of the problem and this resulted in detailed investigations being carried out to attempt to quantify the amount of corrosion occurring in various …
Page 1 of 2