Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 9 of 9 for “"coupled finite element model"”.
-
Fully Coupled Finite Element Model to Study Multiple Hydraulic Fracturing in Heterogeneous Tight Formations
… generated during well perforation. It is a coupled process of fluid and rock mechanics one controlling the fluid movement and other fracture propagation. There is a lack of reliable and robust simulation technique that can couple these two processes at the same time being practical for large …
-
Slope Failure in Cretaceous Clay Shale in Western Manitoba: A Case Study
… analyzed using limit equilibrium analysis. A coupled finite element model was used to model the expected excess porewater pressure response, and therefore the stability of the slope, during construction of a stabilization berm. It was subsequently calibrated to agree with the measured …
-
On the Deformation Mechanics of Hyperelastic Porous Materials
… rate dependence. A newly developed constitutive model was created to capture the response of the polychloroprene rubber. A coupled finite element model of the polychloroprene foam was created and compared to experimental tests for validation. The model slightly over predicted the stress level …
-
Nonlinear modeling and simulation of radial forging process
… The objective of this study is to develop finite element models to investigate the behavior of the workpiece and predict the elimination of void defects in the radial forging process. A nonlinear coupled finite element model has been developed to study the behavior of a large-diameter tube …
-
Thermo-mechanical model of steel shell behavior in continuous slab casting
… the shell, a two-dimensional transient stepwise-coupled finite-element model has been developed. The model simulates a transverse section of the slab as it moves down through the mold and below and incorporates the effects of heat conduction, solidification, shrinkage, non-uniform superheat …
-
Rapid melting of Aluminum Alloys by Induction Melting
… could be performed. In parallel, a two-way coupled Finite Element model was built to study the governing parameters in induction melting such as alloy, current, frequency, slenderness ratio, and mass/size. Additionally, the methodology also studies preheating as a mechanism to reduce melting …
-
Thermomechanical phenomena during rough rolling of steel slab
A mathematical model has been developed to predict the temperature distribution through a slab during rough rolling. The heat transfer model is based on two-dimensional heat flow, and includes the bulk heat flow due to high speed slab motion, but ignores heat conduction in the rolling direction. At …
-
Effect of Configuration and Dimensions on the Thermo-Mechanical Performance of Spark Plasma Sintered Bismuth Telluride Annular Thermoelectric Generator (TEG) Modules
… properties, which serve as inputs for the finite element models used to design thermoelectric modules with parallel and perpendicular configurations vis-a-vis the sintering pressing direction. The second part evaluates the thermoelectric performance and thermal stresses of a ring-shaped …
-
Análise computacional das deformações em túneis gêmeos profundos interligados por galerias
… maciço no entorno do túnel. Este estudo utiliza modelos constitutivos não lineares para o maciço e revestimento, com o objetivo de investigar as deformações instantâneas e diferidas em túneis gêmeos profundos interligados por galerias transversais, tanto no final da construção quanto a longo …