Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 19 of 19 for “"coupled lines"”.

  1. MIC FILTERS

    … types of MIC bandpass filters is the parallel-coupled filter. When such filters are implemented using non-homogeneous media, the difference in the even- and odd-mode phase velocities have a detrimental effect on their performance. These effects in the Microstrip parallel-coupled filter were …

    nus Repository record for MIC FILTERS (opens in a new tab) Download file for MIC FILTERS (opens in a new tab)

  2. Design tradeoffs for noise control in signal integrity for MOS-based interconnect systems.

    … the strength of line coupling, two design guidelines to design interconnect systems for targets of 4% far-end overshoot, 10% far-end crosstalk, and a pre-specified far-end response time are introduced to upgrade package performance and packaging density. A low-frequency approximation associated …

    arizona-thes Repository record for Design tradeoffs for noise control in signal integrity for MOS-based interconnect systems. (opens in a new tab)

  3. Computer aided design of a broadband microwave power divider

    … System", Hewlett-Packard Company. Results for uncoupled and coupled lines were obtained and comparisons were made. The overall performance of this design resulted in higher isolation and better matching properties. Furthermore, it was observed that monotonic change in separation between coupled …

    njit Repository record for Computer aided design of a broadband microwave power divider (opens in a new tab)

  4. LIGA-micromachined tight microwave couplers

    … is the compact single metal layer (SML) coupled-line 3-dB coupler, also called “hybrid”, required in some applications thanks to its ability to divide power equally and electrically isolate the output from the input. In today’s practical edge-coupled SML coupler designs, the level of …

    sask Repository record for LIGA-micromachined tight microwave couplers (opens in a new tab)

  5. Multilayer microwave structures using thick-film technology

    … A new design procedure for the multilayer end-coupled filter has been developed that enables the designer to arrive at the physical dimensions of the multilayer structure based on the filter specification. This design technique is effective as it combines the accuracy of electromagnetic (EM) …

    middlesex Download PDF for Multilayer microwave structures using thick-film technology (opens in a new tab)

  6. Wearable sensors networks for safety applications in industrial scenarios

    … approximation, a specific microwave model for coupled lines has been designed. With this model, the specific antenna for RFID has been designed, with Jeans as substrate. The particular antenna’s substrate allows direct integration into garments, but since the wearable antennas are placed very …

    cagliari Repository record for Wearable sensors networks for safety applications in industrial scenarios (opens in a new tab)

  7. Design of Multi Band Microwave Devices Using Coupled Line Transmission Lines

    … of dual and tri band microwave devices using coupled transmission line structures. Chapter 2 presents the design of a novel dual band transmission line structure using coupled lines. In chapter 3, Design of a dual band branch line coupler and a dual band Wilkinson power divider are proposed …

    unt Repository record for Design of Multi Band Microwave Devices Using Coupled Line Transmission Lines (opens in a new tab)

  8. Multilayer scalable coupler with high directivity

    … in a multi-layer, multi-conductor microstrip coupled-line system. The two coupling mechanisms between neighboring pairs of coupled lines, along with appropriate end interconnections, allow for reduced size and design that achieves equal propagation velocities for the different modes supported …

    gatech Repository record for Multilayer scalable coupler with high directivity (opens in a new tab)

  9. Lumped Element Transdirectional and Codirectional Coupler

    … represent the coupling mechanism between the two coupled lines. Transdirectional couplers are recommended for many applications such as power dividers and power combiners because of the direct current (DC) isolation between the input and output ports. Generic design equations are demonstrated at …

    queens Repository record for Lumped Element Transdirectional and Codirectional Coupler (opens in a new tab)

  10. Signal and Noise Time –domain Models for Microwave FETs

    … segment was considered as a combination of three coupled lines and a conventional FET equivalent circuit. By solving a set of multiconductor transmission line equations using the Finite-Difference Time-Domain (FDTD) technique, an accurate and efficient transistor modeling approach has been …

    ottawa-retro Repository record for Signal and Noise Time –domain Models for Microwave FETs (opens in a new tab)

  11. Design of Tunable/Reconfigurable and Compact Microwave Devices

    … baluns where λ/2 transmission lines or λ/4 coupled lines are used, the proposed baluns are constructed by transmission lines with arbitrary electrical lengths.

    unt Repository record for Design of Tunable/Reconfigurable and Compact Microwave Devices (opens in a new tab)

  12. Negative impedance converter for antenna matching

    … makes use of a single transistor and a pair of coupled lines. Because of its use of a single transistor, stability is less critical and hence it is able to achieve a working frequency of 6GHz. Its performance is compared with the NIC based on Linvill’s model. The coupled line NIC has been …

    birmingham Download PDF for Negative impedance converter for antenna matching (opens in a new tab)

  13. Passive Circuit Modeling Using IPA510

    … line and partitioning it into many transmission lines segments using IPA510 is discussed as well as extracting T-Transmission Line model for coupled lines. Lumped LC equivalent circuit for micros trip transmission line lowpass filter is discussed next. We show how models for IC package leads of …

    portland-state Repository record for Passive Circuit Modeling Using IPA510 (opens in a new tab)

  14. Microwave Metamaterial Applications using Complementary Split Ring Resonators and High Gain Rectifying Reflectarray for Wireless Power Transmission

    … complementary split ring (CSRR) filters, coupled lines are used to provide larger coupling capacitance, resulting in better bandpass characteristics with two CSRRs only. The modified bandpass filters are used to deisgn a compact diplexer. A new CSRR antenna fed by coplanar waveguide has …

    tamu Repository record for Microwave Metamaterial Applications using Complementary Split Ring Resonators and High Gain Rectifying Reflectarray for Wireless Power Transmission (opens in a new tab)

  15. A New Physical Shape Synthesis Method for Planar Microwave Circuits

    … building-block configurations (eg. transmission lines of specific lengths, bends in transmission lines, coupled lines, and so on) of standard shape, and then adjusting the dimensions of selected prescribed features of these building-blocks. The problem with this approach is that the resulting …

    ottawa-retro Repository record for A New Physical Shape Synthesis Method for Planar Microwave Circuits (opens in a new tab)

  16. Novel Structures and Thin Film Techniques for Reconfigurable RF Technologies With Improved Signal Integrity

    … get higher and higher. Adding tabs between the coupled lines is an existing good way to reduce crosstalk. In this dissertation, thin film techniques are applied to further reduce the far-end crosstalk and improve the signal integrity of the highly integrated system. The far-end crosstalk of …

    south-carolina Repository record for Novel Structures and Thin Film Techniques for Reconfigurable RF Technologies With Improved Signal Integrity (opens in a new tab)

  17. Rise Time to Frequency Correlation of Crosstalk in Coupled Microstrip Lines

    … of forward crosstalk in microstrip transmission lines is presented through a computer simulation using SPICE. A non-resistive lumped L-C transmission line model is modified to include capacitive and inductive coupling from adjacent lines. Two adjacent microstrip transmission lines are modeled, …

    ucf Repository record for Rise Time to Frequency Correlation of Crosstalk in Coupled Microstrip Lines (opens in a new tab)

  18. Analysis and design of efficient passive components for the millimeter-wave and THz bands

    … metallic waveguides and planar transmission lines present high attenuation so that new topologies are being considered. Gap Waveguides (GWs), based on a periodic structure introducing an Electromagnetic Bandgap effect, result very suitable since they do not require metallic contacts and avoid …

    upv Repository record for Analysis and design of efficient passive components for the millimeter-wave and THz bands (opens in a new tab)