Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 64 for “"coupled-inductor"”.

  1. Implementation of a Fixed Timing Coupled Inductor Soft-Switching Inverter

    … production for various reasons. The fixed timing coupled inductor soft-switching inverter is of interest because in simulation and previous implementation it exhibits load and source adaptability using simple RC timer circuitry and can be implemented with low cost active auxiliary devices. During …

    vt Repository record for Implementation of a Fixed Timing Coupled Inductor Soft-Switching Inverter (opens in a new tab)

  2. Design, Implementation, Control and Performance Analysis of Coupled Inductor Ćuk Converter

    … interference issues. With the use of a single coupled inductor instead of two separate inductances, the Ćuk converter can be designed to operate with ripple-free input or output current. However, only a minority of the users easily adapt Ćuk converter and its variants for their needs due to the …

    umn Repository record for Design, Implementation, Control and Performance Analysis of Coupled Inductor Ćuk Converter (opens in a new tab)

  3. Control and Modulation Techniques for the Five-Phase Coupled Inductor Inverter

    … modulation techniques. The PWM VSI employs a coupled inductor in each phase-leg to provide three-level output voltages. Compared with the popular three-level neutral-point-clamped inverter, the coupled inductor inverter (CII) uses fewer switching devices, has no dead-time and associated …

    unsw Repository record for Control and Modulation Techniques for the Five-Phase Coupled Inductor Inverter (opens in a new tab)

  4. A low ripple bi-directional battery charger/discharger using coupled inductor

    … battery charge/discharge converter using coupled-inductor. Bi-directional switch structures and proper control scheme make it possible for the power to flow through the same converter in both directions: charging and discharging the battery. Meanwhile, the coupled-inductor is designed in …

    vt Repository record for A low ripple bi-directional battery charger/discharger using coupled inductor (opens in a new tab)

  5. Analysis and design of a low-ripple coupled-inductor boost topology

    … analysis, and design of a new low-ripple coupled-inductor boost topology. This topology is proposed for applications in which the conventional boost requires an input filter and two-stage output filter. One "zero-ripple" coupled magnetic provides both energy storage and second-order …

    vt Repository record for Analysis and design of a low-ripple coupled-inductor boost topology (opens in a new tab)

  6. Investigation of Multiphase Coupled Inductor Topologies for Point-of-Load Applications

    … life. In a multiphase buck converter, discrete inductors are widely used as energy storage elements. However, this solution has a limited transient response with a large size of magnetic components. To overcome these issues, coupled inductor is proposed to realize a small steady-state current …

    vt Repository record for Investigation of Multiphase Coupled Inductor Topologies for Point-of-Load Applications (opens in a new tab)

  7. Investigation of Multiphase Coupled-Inductor Buck Converters in Point-of-Load Applications

    … efficiency and the fast transient in the phase inductor design. In 2000, P. Wong proposed the multiphase coupledinductor buck converter to solve this issue. With the phase inductors coupled together, the coupled-inductor worked as a nonlinear inductor due to the phase-shifted switching network, …

    vt Repository record for Investigation of Multiphase Coupled-Inductor Buck Converters in Point-of-Load Applications (opens in a new tab)

  8. Modelling and digital control of two-phase interleaved coupled-inductor non-isolated DC-DC converters

    … closed-loop control of two-phase interleaved coupled-inductor non-isolated dc-dc converters. Coupled-inductors have been shown to reduce the cost, size, and weight of high-power magnetic components while increasing efficiency. The complete large-signal model of the coupled-inductor boost …

    cork Repository record for Modelling and digital control of two-phase interleaved coupled-inductor non-isolated DC-DC converters (opens in a new tab)

  9. Low ripple and noise DC/DC converter with quasi-resonant switching and integrated magnetics.

    … which couples a transformer and several coupled inductors in one core, and several auxiliary packaging designs. In the steady-state analysis, the operation of ZVS converter is described and the ZVS switch resonant component design procedure is developed. An optimized geometrical core …

    arizona-thes Repository record for Low ripple and noise DC/DC converter with quasi-resonant switching and integrated magnetics. (opens in a new tab)

  10. Permeance based modelling, design and optimization of supercapacitor assisted surge absorber (SCASA)

    … absorber (SCASA) developed at UoW incorporates a coupled-inductor wound to a specially selected magnetic material—powdered-iron—that absorbs transients. Despite its high performance, the circuit generates a secondary effect of a negative voltage-peak due to inductive energy release by the core. …

    waikato-masters Repository record for Permeance based modelling, design and optimization of supercapacitor assisted surge absorber (SCASA) (opens in a new tab) Download file for Permeance based modelling, design and optimization of supercapacitor assisted surge absorber (SCASA) (opens in a new tab)

  11. Performance Improvement of Power Conversion by Utilizing Coupled Inductors

    … application issues of advanced topologies with coupled inductors. The proposed innovative solutions can achieve significant performance improvement compared to the state-of-the-art technology. New applications call for high-efficiency high step-up DC-DC converters. The basic topologies suffer …

    vt Repository record for Performance Improvement of Power Conversion by Utilizing Coupled Inductors (opens in a new tab)

  12. Large step down voltage converters for desalination

    … load charged. A novel Asymmetrical Half-Bridge Coupled-Inductor Buck converter is presented as the ideal solution for large step-down ratios with analysis comparing the ability to efficiently step down a voltage with other common converters, the buck and flyback converters. A comparison between …

    strathclyde Repository record for Large step down voltage converters for desalination (opens in a new tab)

  13. Topological Modifications of Dual Active Bridge DC-DC Converter for Renewable Energy Systems

    … voltage waveform significantly reduces inductor peak and RMS currents, mitigates switch voltage stress, and maintains voltage balancing across split capacitors without auxiliary circuitry. Experimental results verify improved efficiency and an extended ZVS range compared to conventional …

    queens Repository record for Topological Modifications of Dual Active Bridge DC-DC Converter for Renewable Energy Systems (opens in a new tab)

  14. Dynamic Characteristics of DC-DC Converters with Coupled and Nonlinear Magnetics

    … for step changes in load. Incorporating a coupled inductor instead of a normal inductor, and using the second coil of the coupled inductor to saturate the core helps to improve performance for step increases in load. Another modification made is the addition of a bleed-off resistor at the …

    mtu Repository record for Dynamic Characteristics of DC-DC Converters with Coupled and Nonlinear Magnetics (opens in a new tab)

  15. Implementation Of Ćuk Converter With Integrated Magnetics For Residential Solar Applications

    … interference issues. With the use of coupled inductor, the Ćuk converter can adequately operate with ripple-free input or output current. With the use of additional windings along with the coupled inductor, either in the form of inductor or isolation transformer, ripple-free currents …

    umn Repository record for Implementation Of Ćuk Converter With Integrated Magnetics For Residential Solar Applications (opens in a new tab)

  16. Direct Power Transfer Concept in Power Electronics Converters

    … and the overall efficiency is improved. A coupled inductor is used on the input of the proposed converters that creates the direct power path, resulting in a reduction of the power passage in the active and passive components. Additionally, the coupled inductor current has a …

    calgary Repository record for Direct Power Transfer Concept in Power Electronics Converters (opens in a new tab)

  17. Hybrid Passive Component for High Frequency and High Efficiency Power Conversion

    … power transfer, and a high frequency air core coupled inductor topology denoted as the Mutual Branch Topology, which provides load-source matching. The Multi-Layer Ceramic Isolation Device is realized based on a four terminal multi-layer ceramic structure with barium strontium titanate and …

    toronto-retro Repository record for Hybrid Passive Component for High Frequency and High Efficiency Power Conversion (opens in a new tab)

  18. High Frequency, High Current 3D Integrated Point-of-Load Module

    … modularized POL converters, in which the bulky inductor is integrated with the active components to increase the power density. This concept has been demonstrated at current levels less than 5A and power density around 600-1000W/in³. This might address the needs of small hand-held equipment such …

    vt Repository record for High Frequency, High Current 3D Integrated Point-of-Load Module (opens in a new tab)

  19. Low-Profile Magnetic Integration for High-Frequency Point-of-Load Converter

    … this solution, the passive components such as inductors and capacitors are bulky. They occupy a considerable footprint on the motherboard. The problem is exacerbated with the current trend of reducing the size of all forms of portable computing equipment from laptop to netbook, increasing …

    vt Repository record for Low-Profile Magnetic Integration for High-Frequency Point-of-Load Converter (opens in a new tab)

Page 1 of 4