Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 54 for “"crack pattern"”.
-
Simulation of Crack Pattern on Borosilicate Glass Cylinder on Pellet Impact
… idea. This study is focused on simulating the crack pattern developed on a Pyrex 7740 borosilicate glass cylinder which is under impact by a 0.22 caliber lead pellet. The crack pattern develops right after the pellet hits cylinder and leaves it by piercing through the other side, before …
-
CRACK PATTERN SIMULATION OF PRESSURIZED BOROSILICATE GLASS TUBE UNDER PELLET IMPACT USING ALE METHOD
… tube. Previous studies on the effect of the mesh pattern, size and cap geometry were carried out. One of the biggest factors which can help in mitigating the transformer component damage is internal pressure of bushing fluid. This study focuses on developing a Finite Element model which captures …
-
In-Plane Cyclic Testing of Reinforced Concrete Masonry Walls to Assess the Effect of Varying Reinforcement Anchorage and Boundary Conditions
… of failure was diagonal shear for all walls. The crack pattern, stiffness reduction, strength, ductility and energy absorption are the properties that are discussed in the thesis. Some aspects of behaviour of the walls such as crack pattern, stiffness degradation, and energy dissipation are …
-
The Nakahara Effect and Its Influence On Solution-Based 3D Printed Films
… system prior to drying, affecting the type of crack pattern formed due to externally applied forces. TiO2 has important applications due to its interesting semiconducting properties, tunable band gap, photocatalytic properties, biocompatibility, and relative abundance. This is the reason it is …
-
A Machine Learning and Computer Vision Framework for Damage Characterization and Structural Behavior Prediction
… in RC beams, slabs, and panels based on surface crack pattern images. The predictive models have been generated and tested using image data sets obtained from earlier published studies, which together provide about 1,500 crack pattern images captured from about 170 individual RC beam, slab, and …
-
The torsional analysis of beams of arbitrary cross-section with non-linear stress-strain properties
… reinforced with small gage wire to determine the crack pattern and failure mechanisms.
-
Evaluation of Portland Cement Concrete Containing Reclaimed Asphalt Pavement for Pavement Applications
… properties, durability, microstructures, crack pattern, fracture properties, and pavement evaluation related to the use of RAP-PCC for pavement applications were comprehensively evaluated through robust experimental, analytical, and simulative approaches. The mechanical properties and …
-
Analytical investigation of precast columns for bridge substructures
… features, displacements, yielding of bars, and crack pattern were observed at all loading stages. The experimental specimens have shown moderate level cracks and no yielding at end of linear-range loading rates. However, for the ultimate 40.25 in. loading rate, horizontal tensile cracks, …
-
Assessing Bond Beam Horizontal Reinforcement Efficacy with Different End Anchorage Conditions in Concrete Block Masonry Shear Walls
… defining the behaviour of walls, including crack pattern, lateral strength, ductility, effective stiffness, stiffness degradation, and energy dissipation are studied. The reinforcement strain recorded at strategically strain gauged locations revealed that neither the end anchorage conditions …
-
Influence of Dynamic Load Rates on the Seismic Response of Reinforced Concrete Walls
… reinforced concrete walls, such as a lack of cracking in the wall plastic hinge region and premature bar buckling/fracture. In response to these observations, several amendments were made to the New Zealand Concrete Structures Standard, including revised minimum vertical reinforcement …
-
Detection of defects in concrete structures using vibration technique
… Four beams have been investigated. Two types of crack pattern and two types or reinforcement pattern were the main variable parameters. Partially bonded reinforcement as artificially created (by greasing the bars) and positioned at the center third span in two of the four beams investigated. The …
-
Effect of Desiccation Cracks on Earth Embankments
… of levees. Clays are susceptible to desiccation cracks when subjected to long dry spells during summers. There has been an increased interest in studying the occurrence of cracks in soil mass. In particular, many experimental investigations for soils have been undertaken to learn about the crack …
-
Modeling of Mechanical Behavior of Structural Masonry
… the failure function are then compared with the crack pattern in the experimental test.
-
Correlating Acoustic Emissions to Cracking in Silicon Carbide Micro-Indentations
… can be used as a diagnostic tool to determine crack network extent in brittle materials. Using (0001) silicon carbide single crystal as a test system, Vicker's micro-indentation was used to initiate cracking while measuring the corresponding acoustic emission energy released. A wide range of …
-
Finite Element Simulation of the Crack Development in the Gröndal Bridge
… after their opening when an inspection revealed cracks in the webs. The present work is a study by means of Fracture Mechanics (FM) and Finite Element Methods (FEM) of the causes and loads that generated crack initiation as well as further widening and propagation. Some critical stages were …
-
Structural Health Monitoring for Preservation and Safeguard of Architectural Cultural Heritage
… state of conservation. A complete diagnosis of crack pattern regarding not only the external decorated surface but also the internal support is of great importance due to the criticality of internal defects and damage phenomena, which may suddenly degenerate into irreversible failures Objective …
-
Torsional Strengthening of Reinforced Concrete Beams Using CFRP Composites
… as load capacity, deflection, torque, twist, crack propagation, ductility, and failure modes. For this purpose, six RC beams were tested: four reference beams and two strengthened beams were used to observe additional capacity through the use of carbon fiber-reinforced polymer (CFRP) sheets. …
-
Durability Performance and Life Cycle Cost Analysis of Concrete Beams Reinforced with Various Reinforcement
… deviation from linearity, ductility, crack pattern, in addition to the strength loss, and cost. The initial cost of the beams was calculated, and the results showed more than 60% difference for specific types of rebars in comparison to conventional steel reinforced beams.
-
Evaluation of long-term performance of cold in-place recycled asphalt roads
… to five years following construction, reflected cracks, one of the primary forms of distress in hot-mix asphalt overlays of flexible pavements, may be observed. When rolled downed, reflected cracks affect ride quality. In addition, reflected cracks allow the penetration of water into the pavement …
Page 1 of 3