Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 145 for “"crosslink density"”.

  1. Block copolymer modified epoxy: role of epoxy crosslink density.

    Epoxies of systematically varying crosslink density containing 5% by weight of a poly(ethylene oxide)-b-poly(ethylene-alt-propylene) (OP) block copolymer were prepared and characterized. The block copolymer self-assembled to form particles with diameters ranging from 15 to 100 nm. Transmission …

    umn Repository record for Block copolymer modified epoxy: role of epoxy crosslink density. (opens in a new tab)

  2. Fundamental Importance of Fillers, Cure Condition, and Crosslink Density on Model Epoxy Properties

    … shrinkage. The influence of the model epoxy crosslink density was examined by varying the content of 1,4-butanediol in the model system. Addition of 1,4-butanediol led to a decrease in the modulus and glass transition temperature, which resulted in a reduction in residual stress and …

    vt Repository record for Fundamental Importance of Fillers, Cure Condition, and Crosslink Density on Model Epoxy Properties (opens in a new tab)

  3. Influence of Crosslink Density on Swelling and Conformation of Surface-Constrained Poly(N-Isopropylacrylamide) Hydrogels

    … polymer network and is therefore a function of crosslink density. An increase in crosslink density results in a decreased swelling and vice versa. If the hydrogel is mechanically constrained to a surface, it can experience various wrinkling and buckling conformations upon swelling, as the …

    usf Repository record for Influence of Crosslink Density on Swelling and Conformation of Surface-Constrained Poly(N-Isopropylacrylamide) Hydrogels (opens in a new tab)

  4. Computational prediction of the influence of crosslink distribution on the thermo-mechanical properties of epoxies

    … that the microstructure consists of highly crosslinked localized regions connected with a dispersed phase of low crosslink density. The various thermo-mechanical properties of epoxies might be affected by the crosslink distribution. But as experiments cannot report the exact number of …

    mtu Repository record for Computational prediction of the influence of crosslink distribution on the thermo-mechanical properties of epoxies (opens in a new tab)

  5. Mucin Penetration and Macrophage Uptake of RP182-Functionalized POEGMA Microgels: An In Vitro Platform Study

    … This study investigated how surface charge and crosslink density influence the performance of a drug delivery vehicle in these two functions. A library of poly (oligo (ethylene glycol) methacrylate) (POEGMA) microgels with gradients in both surface charge and particle rigidity was prepared using …

    mcmaster Repository record for Mucin Penetration and Macrophage Uptake of RP182-Functionalized POEGMA Microgels: An In Vitro Platform Study (opens in a new tab)

  6. A Study of a PH-Sensitive Polymer for Novel Conformance Control Applications

    Use of pH-sensitive crosslinked poly(acrylic acid) polymer has been proposed as a novel in-depth conformance control system for improved oil recovery. The polymer forms a soft and flexible microgel with a molecular network structure in aqueous solution. When dispersed, it becomes acidic and exists …

    texas Repository record for A Study of a PH-Sensitive Polymer for Novel Conformance Control Applications (opens in a new tab) Restricted access

  7. About the gel structure of lignin

    … weight increases as delignification procedes. As crosslink density is a function of alkyl-aryl ether content, these results suggest that the 6 7 crosslink density of the sol fraction decreases while molecular weight increases. This contradicts to the theoretical behavior for the degradation of an …

    vt Repository record for About the gel structure of lignin (opens in a new tab)

  8. Marine Polysaccharide-Based Immunomodulatory Hydrogels for Attenuation of Immune Response in Cell Therapy for Type-1 Diabetes

    … were assessed. The polysaccharides were crosslinked with methacrylate-functionalised poly(vinyl alcohol) (PVA-MA) in order to fabricate biosynthetic hydrogels using UV photopolymerisation. Two hydrogel configurations were fabricated, one with low crosslink density for islet encapsulation …

    unsw Repository record for Marine Polysaccharide-Based Immunomodulatory Hydrogels for Attenuation of Immune Response in Cell Therapy for Type-1 Diabetes (opens in a new tab)

  9. Synthesis and Characterization of Nitrile Containing Polysiloxanes and Their Corresponding Networks as Aircraft Sealant Materials

    … a basic catalyst. These oligomers were then crosslinked with various hydride functional crosslinking reagents to yield model networks for mechanical and adhesion studies. The network properties of nonpolar polydimethylsiloxane (PDMS), polar poly[methyl(3,3,3-trifluoropropyl)siloxane] …

    vt Repository record for Synthesis and Characterization of Nitrile Containing Polysiloxanes and Their Corresponding Networks as Aircraft Sealant Materials (opens in a new tab)

  10. Analyzing Network Structures and Performance of Dextran Based Hydrogels Crosslinked with Thiol-Ene Chemistry

    … reaction and compared to dextran hydrogels crosslinked with divinyl sulfone (DVSDEX) produced through base catalyzed (pH 12) Michael-addition reaction. The initial hypothesis was that thiol-ene hydrogels would exhibit a different network structure, perhaps more uniform structure. The …

    ku Repository record for Analyzing Network Structures and Performance of Dextran Based Hydrogels Crosslinked with Thiol-Ene Chemistry (opens in a new tab)

  11. Molecular modeling of EPON 862-DETDA polymer

    … cured with the hardening agent DETDA to form a crosslinked epoxy polymer and is used as a component in modern aircraft structures. These crosslinked polymers are often exposed to prolonged periods of temperatures below glass transition range which cause physical aging to occur. Because physical …

    mtu Repository record for Molecular modeling of EPON 862-DETDA polymer (opens in a new tab)

  12. The Network Properties and Solvent Uptake Characteristics of Epoxy-Amine Polymer Networks

    … epoxy monomer DER331 (bisphenol-A) and the amine crosslinking agent m-Xylylenediamine (MXDA) were created to investigate the potential causes of this failure mechanism. In order to more closely mimic industrially-made coatings, samples of these epoxy-amine systems were made with varying levels of …

    whiterose Download PDF for The Network Properties and Solvent Uptake Characteristics of Epoxy-Amine Polymer Networks (opens in a new tab)

  13. An Investigation of the Effects of Interfaces on the Fracture Resistance of 3D Printed Biopolymer Nanocomposites

    … microstructures because of differences in crosslink density. Each printed microstructure revealed distinct morphology of interfaces. The contributions of these interfaces and the resulting microstructures on mechanical properties and fracture resistance of the nanocomposites were further …

    waterloo Repository record for An Investigation of the Effects of Interfaces on the Fracture Resistance of 3D Printed Biopolymer Nanocomposites (opens in a new tab)

  14. Plasma polymerized hydrogel thin films for applications in sensors and actuators

    … properties of the hydrogel films such as crosslink density and thus swelling could be controlled. Chemical bonding structures in plasma polymerized NIPAAm were studied using Fourier transform infrared spectroscopy (FTIR). Contact angle goniometry and quartz crystal microbalance with …

    gatech Repository record for Plasma polymerized hydrogel thin films for applications in sensors and actuators (opens in a new tab)

  15. Effect of chemical structure and crosslinking density on the thermo-mechanical properties and toughness of (meth)acrylate shape-memory polymer networks

    … varying sidegroup structure and multi-functional crosslinkers with varying mole fraction and functionality. Fundamental trends are established between the network chemical structure, crosslink density, glass transition temperature, rubbery modulus, failure strain, and toughness. The glass …

    gatech Repository record for Effect of chemical structure and crosslinking density on the thermo-mechanical properties and toughness of (meth)acrylate shape-memory polymer networks (opens in a new tab)

  16. MULTI-MATERIAL THERMOSET SYNTHESIS THROUGH PHOTOSWITCHABLE POLYMERIZATIONS

    … ends by switching the wavelength of light. The crosslink density could be temporally tuned by using different amount of light irradiation following the photo-controlled polymerization mechanism. By using photomasks, spatial control over the crosslink density was achieved on both macroscale and …

    cornell Repository record for MULTI-MATERIAL THERMOSET SYNTHESIS THROUGH PHOTOSWITCHABLE POLYMERIZATIONS (opens in a new tab)

  17. Characterization of plasma-polymerized polyethylene glycol-like films

    … solution-polymerized PEG films with a higher crosslinked structure. Manipulation of plasma deposition conditions allowed control of film crosslink density and resulted in tunable dissolution and swelling properties of the PEG-like polymer. At higher applied powers, lower operating pressures, …

    gatech Repository record for Characterization of plasma-polymerized polyethylene glycol-like films (opens in a new tab)

  18. Development of Functional Polymeric Materials for Microfluidic Systems

    … The relationship between the hydrogel crosslink density and the hydrogel volume has been studied in detail. In addition, dissolvable hydrogels based on de-crosslinking have been demonstrated, and the factors that affect dissolution kinetics have been understood through systematic …

    uiuc Repository record for Development of Functional Polymeric Materials for Microfluidic Systems (opens in a new tab)

Page 1 of 8