Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 28 for “"cure monitoring"”.
-
Self-sensing composites: cure monitoring
The ability to monitor the cure kinetics at the fibre-matrix interface and the effects induced by the presence of silane coupling agents was the main focus of this study. E-glass reinforcing fibres were used as chemical sensors to eliminate the potential problems associated with implanting a …
-
Epoxy cure monitoring with artificial neural networks
Includes bibliographical references (pages 88-95).
-
In-situ cure monitoring of epoxy resin systems
… develop novel optical fibre sensors capable of monitoring the cure state of an epoxy/amine resin system. The sensors were of simple construction, consisting of an optical fibre from which the silicone cladding layer had been removed over a short length. This stripped length was embedded into the …
-
Cure monitoring of composite materials using optical techniques
… use of this arrangement for further studies of cure monitoring of composite materials. Samples of 3.0 cm diameter and 1, 2, 4, 6, 8, 10 and 12 cm thickness were made and the interferometer waveforms were recorded in 10 min time intervals after the curing agent was mixed with the epoxy. …
-
Epoxy matrix composite strain sensing and cure monitoring
… sensor is described, which permits the state of cure of an epoxy matrix to be monitored, when the sensor is embedded in a polymeric matrix composite. By using a glass rod with a retroreflecting end for the target fiber in the EFPI sensor, the intensity of the light reflected depends on the …
-
Miniature Fiber Optic Viscoelasticity Sensor for Composite Cure Monitoring
… during processing to permit control of the cure cycle based on measurements of the material's internal state. While sensors have been demonstrated that infer the material state indirectly through measurements of acoustic impedance, electrical impedance, or refractive index, sensors that …
-
An Investigation Into The Applicability Of NMR For Cure Monitoring Of Composites
… research programme has been concerned with the cure of epoxy resins (specifically Araldite MY750 epoxy resin system), the behaviour of the resin as it cures and how the extent of cure can affect the mechanical properties of components. Therefore, investigations have been carried out into how …
-
High Refractive Index Silicate Fibres for Cure Monitoring of Epoxy Matrix Composites
Fibre evanescent wave spectroscopy (FEWS) cure monitoring has previously been demonstrated with reinforcing fibres using low refractive index epoxy systems. To enable sensing of a range of aerospace grade epoxy systems, chalcogenide fibres with high refractive index (RI) and a large infra-red (IR) …
-
Ultrasound detection using singlemode optical fibers with applications to epoxy cure monitoring
The state of cure of epoxies is an important issue in the manufacture of graphite epoxy composites used in aerospace structures. Variations in the initial state and process used to cure the epoxy resin in a composite material lead to variations in the mechanical properties of the part manufactured …
-
In-situ cure monitoring and characterization of graphite/epoxy composites using fiber optics and ultrasonics
… multiple plies into the desired shape, and then cured in an autoclave with simultaneous application of proper heat and pressure. The knowledge of the cure process is very important in order to obtain fully cured and high-quality composites. In-situ sensors capable of monitoring the change of …
-
Production of controlled networks and morphologies in toughened thermosetting resins using real-time, in-situ cure monitoring
… (FTNIR) fiber optic sensor was developed and the cure of a model toughened cyanate as well as a commercial paste adhesive was followed with this sensor In the near-infrared. The design was suitable for many applications. A mold was designed to incorporate the fiber sensor for composite …
-
In-situ and on-line characterization of polymer systems : cure monitoring of polymer composites and spectroscopic studies of chemically amplified photoresists
Thesis (Ph. D.)--Michigan State University. Department of Chemical Engineering, 1999
-
Thermal, rheological, and mechanical properties of a polymer composite cured at staged cure cycles
… and mechanical properties of a polymer composite cured at different one-stage and two-stage cure cycles were studied in this dissertation. A commercial carbon-fiber prepreg, Cycom 977-2 UD, was used. This curing-toughened epoxy resin prepreg is formulated for autoclave or press molding. An …
-
Identifying the Influences on Network Formation in Structural Isomers of Multifunctional Epoxies
… structural isomers of triglycidyl aminophenol cured with the structural isomers of diaminodiphenyl sulphone was monitored using three different cure monitoring techniques. Four different epoxy-rich formulations were made: TGpAP/44’DDS, TGpAP/33’DDS, TGmAP/44’DDS and TGmAP/33’DDS. Near-infrared …
-
Real-time monitoring of exposure controlled projection lithography (ECPL) process
… from the substrate surface. The Interferometric Cure Monitoring (ICM) system utilizes the principle of Mach-Zehnder interferometer to measure the change in refractive index of the photopolymer resin. The goal of this thesis is to conduct real-time metrology for both the height and the lateral …
-
Fibre-optic sensor development for process monitoring of epoxy resins
… the feasibility of using the FRS for in-situ cure monitoring of epoxy resin systems. During the cross-linking of specified resins, the sensor revealed optical phenomena throughout the latter stages and was shown to be sensitive to the glass transition temperature, nano-particulate movement, …
-
Design and development of a hyphenated technique for monitoring the cure of epoxy-amine resin systems
… the integration of multiple sensing systems for cure monitoring. An Abbe refractometer was selected to house a custom-made cell which accommodated the following optical sensors: (i) Fresnel reflection sensor; (ii) near-infrared transmission sensor; (iii) evanescent wave sensor; and (iv) fibre …
-
Cure characterization and process modeling of soy-based composites
"This work deals with cure characteristics of soy-based resin system, fabrication of pultruded soy-based composites, and analysis of flexible polymeric foams. In the first part of this work, the cure kinetics and rheology of the soy-based resin system were studied. The cure kinetics models of the …
Page 1 of 2