Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 17 of 17 for “"curing reactions"”.
-
Can nitrite-embedded packaging film induce curing reactions in meat post-thermal processing?
Nitrite-embedded film (NEF) was evaluated for compositional, quality, and safety attributes of conventionally-cured, alternatively-cured, and nitrite-free bologna. Nitrite is a key ingredient for quality attributes (color, flavor, antioxidant) and antimicrobial protection in cured meat products. …
-
On-line cure characteristics of organic strip steel coatings by infrared spectroscopy
… peaks which could be used to follow the curing reactions of the coatings. Corresponding candidate peaks were identified and quantified from specular reflectance infrared (IR) spectra of the coatings. In all instances, candidate peak heights were ratioed against reference peak heights to …
-
Investigating the control of Listeria monocytogenes on uncured, no-nitrate-or-nitrite-added meat products
… with natural or “ clean label ” antimicrobials. Curing systems which utilize a natural nitrate source and nitrate reducing starter culture were negatively impacted by the addition of these antimicrobials. Significantly higher levels (P<0.05) of residual nitrate and lower levels (P<0.05) of …
-
Synthesis and Characterization of Phosphine Oxide Containing Monomers and of the Flame Resistant Polymers Prepared Therefrom
… selected control systems. In addition, suitable curing schedules for epoxy networks were determined by using dielectric monitoring techniques. The curing rates varied with the structure of the monomers and were slowest for the deactivated control (4,4'aminophenyl sulfone). Epoxy networks …
-
Curing Chemistry Study of PMR-15 Polymide Using TGA/FITR/MS
… polyimide having Tg in excess of 316°C. The curing chemistry of PMR-15 will be studied in the form of a prepreg which is made from the impregnation of a “B” staged PMR-15 resin on an intermediate modulus graphite fiber. PMR-15 prepreg is routinely used for the aircraft engine and aerospace …
-
Cure induced stress generation and viscoelasticity in polymer coatings.
… by free-radical polymerization and crosslinking (curing) reactions initiated with ultraviolet (UV) light do so quickly and at room temperature. Low viscosity monomer or oligiomer makes the use of volatile solvent unnecessary, decreasing energy use and making the process more environmentally …
-
Identifying the Influences on Network Formation in Structural Isomers of Multifunctional Epoxies
… network formation. From this, the type of reactions occurring were identified. Differential scanning calorimetry (DSC) was used to measure the thermal response of the curing reactions, allowing for the calculation of kinetic parameters. Dielectric analysis (DEA) monitored the ion viscosity …
-
A new dual-stage multicomponent thermosetting polymer system
… aramid honeycomb core composites. Dual-stage curing to meet the unique requirements of the honeycomb manufacturing process was achieved with a tricomponent mixture of epoxy and dicyanate monomers and a carboxylic acid anhydride hardener. In the first stage of curing the anhydride hardener …
-
Elevated-Temperature Oxidative Curing, Friction and Wear of Polyphenylene Sulfide (PPS) and its Composites
… of its complex processing, which involved curing reactions, and the effect of those reactions on its mechanical properties had hindered its development as a matrix for self-lubricated polymer composites. Moreover, little is known about its friction and wear behavior at high temperatures and …
-
Gelation and hardening mechanisms in a model polyester resin and related systems
… reaction. The final stages in the curing of a polyester resin, which are of direct technical interest because of their effect on the high temperature properties of laminating resins, were studied using a ball rebound relaxation technique which produced mechanical "spectra" of the …
-
Simultaneous Moulding and Shape Fixation of Wood Veneer by Specific Material Modification
… dilutions of the impregnation liquid on the curing reactions and the retained polymer yield. Thereby, high initiator contents promoted a more rapid curing at lower temperatures with higher polymer yields, whereas higher dilution shifted the curing towards higher temperatures and possibly …
-
Precipitation polymerization of divinylbenzene to monodisperse microspheres: An investigation of the particle formation mechanism
… that are produced both by intermolecular reactions between oligomers and by further propagation. These microgels are transient and disappear from the reaction mixture at the same time as microspheres appear. This suggests that the microgels are the nuclei that grow to become the final …
-
The use of nano-particles for the development of enhanced gas barrier polymeric coatings
… process, the solvent evaporates and the curing reactions take place. Before the evaporation or in the initial stages there is no direct interactions between the hydrophobic polymer and the hydrophilic particles. By a proper choice of the solvent and controlling its evaporation rate, …
-
Structure/property relations of graphene oxide/epoxy nanocomposites: tailoring the particle surface chemistry for enhanced electrical and thermal performance
… oxidized GO interacts with the crosslinking reactions of the matrix. For this, GO was produced with acidic oxidation, based upon potassium permanganate (KMnO4) and then characterized via Raman, thermogravimetric analysis (TGA) and X-ray spectroscopy (XPS), which revealed increased graphitic …
-
Cure Kinetics and Processing Parameters of Neat and Reinforced High Performance Epoxy Resins: Evaluation of Techniques
Kinetic equation parameters for the curing reaction of a commercial glass fiber reinforced high performance epoxy prepreg composed of the tetrafunctional epoxy tetraglycidyl 4,4-diaminodiphenyl methane (TGDDM), the tetrafunctional amine curing agent 4,4-diaminodiphenylsulfone (DDS) and an ionic …
-
Effect of Cellulose Nanocrystals on the Rheology, Curing Behavior, and Fracture Performance of Phenol-Formaldehyde Resol Resin
… could be disrupted by ultrasound treatment. The curing progressions of the resin and CNC–resin mixtures were analyzed by non-isothermal differential scanning calorimetry (DSC). The DSC curves showed two exotherms followed by an endotherm. The energy of activation for the first exotherm was …
-
NMR investigations of cyanate resins
… many structural composites. The mechanism of the curing reactions of cyanate resins based on bisphenol-A dicyanate has been investigated both in solution and in the solidstate by NMR spectroscopy. To facilitate the study, 13C and 15N isotopic labelled cyanate resins were used. The main curing …