Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 414 for “"current-source"”.

  1. Class-E Current Source Power Conversion

    Current source is used in auxiliary power supplies, battery chargers, and LED drivers. The battery chargers are required to provide constant current within a wide output voltage range, similar to LED drivers. The load-independent (LI) Class-E inverter is a promising topology for such applications …

    vt Repository record for Class-E Current Source Power Conversion (opens in a new tab)

  2. Investigation on current source inverter with FPGA

    … in the field of power electronics, voltage source inverter (VSI) has been the preferred topology in the industry for direct current (DC) to alternating current (AC) power inversion. However, there is another inverter topology called the current source inverter (CSI), which is based on the …

    texas Repository record for Investigation on current source inverter with FPGA (opens in a new tab)

  3. Current source based wind energy conversion system

    … a full-scale back-to-back pulse width modulated current source converter (BTB-PWM-CSC) as an interfacing converter for a variable-speed wind energy conversion system (WECS) that uses a permanent magnet synchronous generator (PMSG). It has been shown that the proposed current source converter …

    strathclyde Repository record for Current source based wind energy conversion system (opens in a new tab)

  4. Medium-voltage current-source solid-state transformer

    … and medium-voltage (MV) prototypes of the current-source solid-state transformer (SST). Recent years have witnessed significant growth in renewable energy and electrified transportation resources. The MV SST is a promising solution to replace the conventional line-frequency transformer and …

    gatech Repository record for Medium-voltage current-source solid-state transformer (opens in a new tab)

  5. A Current Source for Electrical Impedance Tomography

    <p>The first prototype version of the current source for electrical impedance tomography was studied. Based upon its performance, a second version of the current source was built, including various improvements designed to address the issues of this first version.</p> <p>The frequency range was …

    mcmaster Repository record for A Current Source for Electrical Impedance Tomography (opens in a new tab)

  6. Design and verification of a current source inverter

    Submission original under an indefinite embargo labeled 'Open Access'. The submission was exported from vireo on 2025-10-19 without embargo terms

    uiuc Repository record for Design and verification of a current source inverter (opens in a new tab)

  7. Microcontroller-based current source inverter driven induction motor drive

    Current Source Inverter Induction Motor Drives (CSI-IM) are well suited to large power applications when regeneration is required. This thesis deals with the design and analysis of a flexible single chip microcontroller based CSI-IM drive. In order to demonstrate the merits of the adaptable …

    ubc Repository record for Microcontroller-based current source inverter driven induction motor drive (opens in a new tab) Download PDF for Microcontroller-based current source inverter driven induction motor drive (opens in a new tab)

  8. Current Source Inverter in Magnetohydrodynamic Drive for Marine Propulsion

    This thesis presents the design of a full-bridge current-source inverter (CSI) as an AC magnetohydrodynamic drive. The inverter is built around a hybrid reverse-blocking switching unit composed of a normally-on SiC JFET in series with a SiC Schottky diode. The work includes the custom isolated …

    gatech Repository record for Current Source Inverter in Magnetohydrodynamic Drive for Marine Propulsion (opens in a new tab)

  9. Low-cost current-source 1-ph photovoltaic grid-connected inverter.

    … analysis and investigation of a single-phase currentsource (CSI) grid-connected inverter topology that is based on a photovoltaic array as a supply and a DC link inductor acting as a constant-current source. The proposed low-cost system is implemented using an open-loop control to prove the …

    adelaide Repository record for Low-cost current-source 1-ph photovoltaic grid-connected inverter. (opens in a new tab)

  10. Current-Source DC-DC Converter for Fiber-Optic Communication Systems

    In this thesis, a proof of concept for a current-source DC-DC converter for powering sensors used in an underwater communications system is presented. The proposed converter steps down an input current of 0.9 A to 0.625 A, while maintaining an output voltage of 24 V and output power of 15 W. The …

    calpoly Repository record for Current-Source DC-DC Converter for Fiber-Optic Communication Systems (opens in a new tab)

  11. A Current-Source Modular Converter for Large-Scale Photovoltaic Systems

    The world is shifting toward renewable energy sources (RESs) to generate clean energy and mitigate the stress of global warming caused by CO2 emissions in recent decades. Among several RES types, large-scale photovoltaic (LSPV) plants are a promising source for meeting ambitious clean energy …

    lancaster Download PDF for A Current-Source Modular Converter for Large-Scale Photovoltaic Systems (opens in a new tab)

  12. Three phase current source inverter using GaN for high frequency switching

    This thesis report will explore current source inverter (CSI) design through simulations, hardware design and hardware testing. With development of wide bandgap devices and increasing commercial availabilities, higher switching frequency is achievable with manageable losses. Many benefits derive …

    texas Repository record for Three phase current source inverter using GaN for high frequency switching (opens in a new tab)

  13. Advanced Semiconductor Device and Topology for High Power Current Source Converter

    … device and topology for the high power current source converter (CSC). The CSC is very attractive in high power applications due to its lower output dv/dt, easy regeneration capability and implicit short-circuit protection. Traditionally, either a symmetrical gate turn-off (GTO) thyritor …

    vt Repository record for Advanced Semiconductor Device and Topology for High Power Current Source Converter (opens in a new tab)

  14. Current source dc-dc and dc-ac converters with continuous energy flow

    This work considers current sourced power electronic converters. The thesis classifies and presents several new single-phase and three-phase differential-mode current source inverters that evolve from the basic dc-dc converter topologies. The switched, large-signal, and small-signal models of these …

    strathclyde Repository record for Current source dc-dc and dc-ac converters with continuous energy flow (opens in a new tab)

  15. Asynchronous Complementary Dual Channel Current Source Gate Driver for Synchronous Buck Converters

    Currently there is a push for higher switching frequency DC-DC converters, especially in mobile and computer applications. Higher frequency operation allows for better transient performance and a reduction in the size of magnetic components. This leads to converters with a higher power density. …

    queens Repository record for Asynchronous Complementary Dual Channel Current Source Gate Driver for Synchronous Buck Converters (opens in a new tab)

  16. DC-DC converter current source fed naturally commutated brushless DC motor drive

    … that drive. Traditional BLDC drives use Voltage Source Inverters (VSI) that utilize hard switching, thereby generating switching losses and entail the use of large heatsinks. VSI needs a huge dc link capacitor that is inherently unreliable and is one of the most expensive components of a drive. …

    tamu Repository record for DC-DC converter current source fed naturally commutated brushless DC motor drive (opens in a new tab)

Page 1 of 21