Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 62 for “"cutting fluid"”.

  1. Sustainable manufacturing metal cutting fluid – from mineral oil to vegetable oil

    Metal cutting fluids (MCFs) are widely used in industry. This raises the concerns about sustainability, biodegradability and the associated health risks. Numerous studies show the benefits of using vegetable oil-based over mineral oil-based MCFs. Having numerous advantages like lower production …

    chalmers Repository record for Sustainable manufacturing metal cutting fluid – from mineral oil to vegetable oil (opens in a new tab)

  2. Evaluation of the atomization-based cutting fluid spray system in milling of titanium alloy

    … it difficult to dissipate heat generated during cutting process. Therefore, effective cooling and lubrication effects are vital during machining of these alloys. Recently, it has been shown that an atomization-based cutting fluid (ACF) spray system can effectively cool and lubricate the cutting …

    uiuc Repository record for Evaluation of the atomization-based cutting fluid spray system in milling of titanium alloy (opens in a new tab)

  3. Effects of the use of soybean oil as cutting fluid on the surface finish for turning operations

    … costs with the elimination of disposal of used cutting oil that the use of biodegradable oil offers to the metal-cutting operations. The purpose of this study was to investigate the effect of the use of an experimental soybean-based oil as a cutting fluid on surface finish for turning …

    northern-iowa Repository record for Effects of the use of soybean oil as cutting fluid on the surface finish for turning operations (opens in a new tab)

  4. Analysis of droplet behavior on a rotating surface in atomization-based cutting fluid systems for micro-machining

    Atomization-based cutting fluid (ACF) systems have been recently found to be effective in providing both cooling and lubrication for micro-scale machining operations. The ACF systems are preferable over the conventional flood cooling methods as they effectively reduce the temperature at the …

    uiuc Repository record for Analysis of droplet behavior on a rotating surface in atomization-based cutting fluid systems for micro-machining (opens in a new tab)

  5. Prediction of tool temperature during machining of Ti-6Al-4V alloy with atomization-based cutting fluid spray system

    Atomization-based cutting fluid (ACF) spray system is being sought as an alternative to cooling processes currently used for machining difficult-to-cut materials such as Ti-6Al-4V alloy. The ACF spray system generates a stream of monodispersed droplets of cutting fluid which then gets mixed in a …

    uiuc Repository record for Prediction of tool temperature during machining of Ti-6Al-4V alloy with atomization-based cutting fluid spray system (opens in a new tab)

  6. A study on the fluid film of an atomization-based cutting fluid (ACF) spray system during titanium machining

    … accelerated tool wear. The atomization–based cutting fluid (ACF) spray system has recently been demonstrated to improve tool life during titanium machining. The penetration into the tool–chip interface by means of the thin fluid film created by the ACF spray system appears to be the mechanism …

    uiuc Repository record for A study on the fluid film of an atomization-based cutting fluid (ACF) spray system during titanium machining (opens in a new tab)

  7. Investigating the influence of film formation on the machining performance in an atomization-based cutting fluid spray system

    … conductivity, high affinity to tool materials at cutting temperatures and production of thin chips during machining. Heat generated in the tool-chip contact region is not readily dissipated, leading to a shortened tool life. Various cooling methods have been studied for titanium machining …

    uiuc Repository record for Investigating the influence of film formation on the machining performance in an atomization-based cutting fluid spray system (opens in a new tab)

  8. The design and analysis of a metalcutting coolant/lubricant application system for delivery of a soy based cutting fluid

    "Cutting fluids have been used to greatly improve metal cutting performance for over one hundred years. These fluids act as a coolant to reduce temperatures in the cutting zone and as a lubricant to reduce frictional forces at the tool/work/chip interfaces. Benefits gained from cutting fluid use …

    must-thes Repository record for The design and analysis of a metalcutting coolant/lubricant application system for delivery of a soy based cutting fluid (opens in a new tab)

  9. Orthogonal cutting in lubricated conditions

    The work investigates the role of cutting fluids in metal cutting and comparas their effectiveness in orthogonal cutting conditions. The basic functions of a cutting fluid are defined and the lubricating function is selected as a feasible measure for comparison. The effectiveness of a cutting fluid …

    cent-lancashire Download PDF for Orthogonal cutting in lubricated conditions (opens in a new tab)

  10. Coolant fluid in a turning operation: Soybean coolant fluid in different concentrations versus petroleum coolant fluid

    … be more "green." Traditionally petroleum based fluids are used in the manufacturing industry. However they are environmentally more harmful as well as cause significant hazards to the operator. This thesis will provide a case study for this sector to become more environmentally friendly with the …

    northern-iowa Repository record for Coolant fluid in a turning operation: Soybean coolant fluid in different concentrations versus petroleum coolant fluid (opens in a new tab)

  11. Torneamento do aço-ferramenta AISI D6 temperado e revenido nas condições seco, jorro e LN2: uma análise técnico-econômica

    … the machining industry. The use of conventional cutting fluids based on mineral oils, for example, has been approached as a practice to be overcome or, at least, minimized. However, the solution for this question comes up against technical aspects, mainly in the case of machining of …

    brazil-ufrn Repository record for Torneamento do aço-ferramenta AISI D6 temperado e revenido nas condições seco, jorro e LN2: uma análise técnico-econômica (opens in a new tab)

  12. The Experimental Evaluation of Environmentally Friendly Cutting Fluids in Micro-Milling

    In manufacturing, cutting fluids promote machining performance by removing heat, lubricating the cutting zone, flushing away chips, and preventing in process corrosion. To synthetize conventional metalworking fluids (MWFs), aside from choosing from a selection of base oils, an array of additives …

    uvic Repository record for The Experimental Evaluation of Environmentally Friendly Cutting Fluids in Micro-Milling (opens in a new tab)

  13. Fresamento com ar quente: uma proposta para minimizar a formação de trincas térmicas em ferramentas de metal duro

    … which imposes cyclic thermal loads to the cutting tool, causing frequent stresses changes in its superficial and sub-superficial layers. These characteristics cause the formation of perpendicular cracks from cutting edge which aid the cutting tool wear, reducing its life. Several works on …

    brazil-ufrn Repository record for Fresamento com ar quente: uma proposta para minimizar a formação de trincas térmicas em ferramentas de metal duro (opens in a new tab)

  14. Development of a micro-milling force model and subsystems for miniature Machine Tools (mMTs)

    … Unlike conventional macro-machining, the cutting mechanism in micro-machining is complex with high level of non-linearity due to the combined effects of edge radius, size, and minimum chip thickness effect, etc., resulting in no chip formation when the chip thickness is below the minimum …

    uvic Repository record for Development of a micro-milling force model and subsystems for miniature Machine Tools (mMTs) (opens in a new tab)

  15. Utilização do éster de soja como biolubrificante

    … so to decrease mainly, operator aggression the Cutting Fluids became an emulsion of oil / water or water / oil. However, the emulsion was not considered the most suitable solution for environmental question, therefore the search for biodegradable lubricants and which no are toxic continues and …

    brazil-ufrn Repository record for Utilização do éster de soja como biolubrificante (opens in a new tab)

Page 1 of 4