Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 137 for “"cutting parameters"”.

  1. Comparative assessment of bit geometry and cutting parameters.

    … this research are to evaluate the performance of cutting tool, having different geometric configurations, in regards to bit – rock interaction and dust generation. When the cutting process takes place, the main objective is to cut bigger blocks of land/ridge rather than small and less fine dust. …

    wvu Repository record for Comparative assessment of bit geometry and cutting parameters. (opens in a new tab)

  2. Relationship between cutting parameters and bit geometry in rotary cutting

    … was to investigate the relationship between cutting parameters (cutting force, penetration force, specific energy, specific respirable dust) and the bit geometry parameters (angle of the bit tip, bit tip size and shape of the bit) in order to reduce the amount of specific respirable dust …

    wvu Repository record for Relationship between cutting parameters and bit geometry in rotary cutting (opens in a new tab)

  3. A Generalised Approach for the Prediction of Laser Cutting Parameters

    … partial implementation of this design for laser cutting systems. This makes use of Computer Aided Design and Manufacture, Computer Numerical Controlled laser cutting machines, database and computerised planning and control.

    glasgow Download PDF for A Generalised Approach for the Prediction of Laser Cutting Parameters (opens in a new tab)

  4. Empirical correlations between rock cutting parameters and excavated rock surface rebound hardness

    "In field excavation, cutting tools operate on rock surfaces damaged from previous tool pass, yet, average intact rock properties are often used in field project estimations. This can result in overestimation of excavation time and cost. The ability to accurately correlate the damaged rock …

    must-thes Repository record for Empirical correlations between rock cutting parameters and excavated rock surface rebound hardness (opens in a new tab)

  5. Coal dust characterization and the impact of cutting parameters on fine particles

    … the respirable dust generated during the cutting of coal using conical picks in varying states of wear including brand-new, moderately worn, and completely worn in a controlled laboratory setting. Characterizing coal dust is crucial for determining appropriate respirable dust suppression …

    colo-mines Repository record for Coal dust characterization and the impact of cutting parameters on fine particles (opens in a new tab)

  6. Investigation of the Impact of Cutting Parameters on Surface Finish for a Discontinuous Machining Process

    <p>An investigation of the impact of cutting parameters on surface finish for a discontinuous machining process, face milling, is reported herein. While several similar studies involving continuous machining operations, primarily turning, have been conducted, few studies have addressed …

    ut-knoxville Repository record for Investigation of the Impact of Cutting Parameters on Surface Finish for a Discontinuous Machining Process (opens in a new tab)

  7. Analysis of cutting parameters and heat generation on bits of a continuous miner - using numerical and experimental approach.

    Analysis of the cutting process of a continuous miner in a coal mine requires a tedious experimental set up. But with the advance of modern computers, such complex system can be simulated using numerical modeling. It is the goal of this dissertation to use finite element analysis to investigate the …

    wvu Repository record for Analysis of cutting parameters and heat generation on bits of a continuous miner - using numerical and experimental approach. (opens in a new tab)

  8. Cutting power and dust emission in sawing kiln-dried, green and frozen douglas-fir and western maple wood

    … This thesis investigates the effects of five key cutting parameters (wood species, tool wear, wood condition, rake angle, and feed speed) on cutting power and dust emission during circular sawing of Douglas-fir and Western maple, with the overall aim to identify optimal parameter combinations to …

    ubc Repository record for Cutting power and dust emission in sawing kiln-dried, green and frozen douglas-fir and western maple wood (opens in a new tab) Download PDF for Cutting power and dust emission in sawing kiln-dried, green and frozen douglas-fir and western maple wood (opens in a new tab)

  9. Investigation of significant parameters in gear hobbing

    … out in order to investigate the effect of cutting parameters on the conventional hobbing process in which the response is analysed and practically tested. The investigation is n six sections: (i) Assessment of cutting torques and power consumed during hobbing. (ii) The study of the …

    aston Download PDF for Investigation of significant parameters in gear hobbing (opens in a new tab)

  10. Investigation of the characteristics of the kerf and the surface generated in the course of cutting titanium with abrasive waterjets

    <p>The effect of cutting parameters on the quality of cut in the course of cutting Titanium (Gr.2) with Abrasive Waterjet is investigated. The cutting parameters include nozzle traverse rate, size and feed rate of abrasives and nozzle(s) diameter. The width of kerf (top and bottom ), taper and …

    njit Repository record for Investigation of the characteristics of the kerf and the surface generated in the course of cutting titanium with abrasive waterjets (opens in a new tab)

  11. Machinability studies of high strength materials: steel (277 BHN)

    … reliable machining data in terms of tool life, cutting force and surface finish in relation to cutting speed, feed rate and depth of cut. During this research cutting tests were carried out by using both one variable-at-a-time and design of experiment approaches. For one-variable-at-a-time …

    dcu Download PDF for Machinability studies of high strength materials: steel (277 BHN) (opens in a new tab)

  12. Machining Fibre Metal Laminates and Al2024-T3 aluminium alloy

    … The objective is to quantify the effects of the cutting parameters and two modern coolant technologies on cutting forces and a number of hole quality parameters. The generated drilling cutting forces, quality of machined hole and drilling-induced damage and defects when drilling GLARE fibre metal …

    whiterose Download PDF for Machining Fibre Metal Laminates and Al2024-T3 aluminium alloy (opens in a new tab)

  13. ANALYSIS AND OPTIMIZATION OF LASER CUTTING PROCESS FOR STRUCTURAL STEELS

    Laser cutting is a widely used technology for precision cutting of various materials, in-cluding mild structural steel. It involves the use of a high-powered laser beam to melt, burn, or vaporize the material, resulting in a clean and accurate cut. This doctoral thesis presents a comprehensive …

    trento Repository record for ANALYSIS AND OPTIMIZATION OF LASER CUTTING PROCESS FOR STRUCTURAL STEELS (opens in a new tab)

  14. Understanding of cutting tool edge preparations and their impacts on machining process performance

    The cutting tool edge preparation is considered as one of the important technologies that were recently developed for micro-machining due to its impact on cutting forces and stresses, tool life, temperature distribution and surface integrity. The most frequent tool edge preparations include round …

    ets-quebec Download PDF for Understanding of cutting tool edge preparations and their impacts on machining process performance (opens in a new tab)

  15. Machinability studies of high strength materials and the development of a data base system

    … of these investigation were to generate cutting data in relation to the machining responses ie , tool life, surface roughness, and cutting forces. The cutting tests were carried out using one-variable-at-a-time and design of expenments. For one-variable-at-a-time experiment, cutting …

    dcu Download PDF for Machinability studies of high strength materials and the development of a data base system (opens in a new tab)

  16. Machinability Study on Silicon Carbide Particle-Reinforced Aluminum Alloy Composite with CVD Diamond Coated Tools

    … carbide particles (AlSiC) require special cutting tools due to the high hardness and abrasive properties of the ceramic particles. Diamond coated cutting tools are ideal for machining this type of pMMC. Previous research studies focus on the machinability of pMMCs with low ceramic content. …

    u-pacific Repository record for Machinability Study on Silicon Carbide Particle-Reinforced Aluminum Alloy Composite with CVD Diamond Coated Tools (opens in a new tab)

  17. Vibration assisted machining: Modelling, simulation, optimization, control and applications

    … chosen to perform this study. The effects of cutting parameters are evaluated and the optimal cutting conditions are determined. The interaction of cutting parameters is established to illustrate the intrinsic relationship between cutting parameters and surface roughness, tool wear and …

    brunel Repository record for Vibration assisted machining: Modelling, simulation, optimization, control and applications (opens in a new tab)

  18. Evaluating the Machinability of Titanium Alloys, Timetal 407 and Ti-6Al-4V

    … emerging alloys and secondly in optimising the cutting parameters during the machining of aerospace components. To assess machinability in the developmental stage of an emerging alloy, a series of small scale experiments were utilised to assess the machinability outputs for Timetal 407 and …

    whiterose Download PDF for Evaluating the Machinability of Titanium Alloys, Timetal 407 and Ti-6Al-4V (opens in a new tab)

  19. Simulation of a microprocessor controlled drill press

    … microprocessor first evaluates the optimum cutting parameters for the given cutter size, work material and operation. It then uses a look-up table, which can be considered as data base, to evaluate the cutting parameters. The domain of applicability can be easily enhanced by expanding the …

    njit Repository record for Simulation of a microprocessor controlled drill press (opens in a new tab)

Page 1 of 7