Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 18 of 18 for “"cutting rate"”.

  1. Optimization of Wire Diameter for Maximizing Removal Rate in Wire Electrical Discharge Machining

    … productivity is wire breakage. To increase the Cutting Rate (CR) more power is required, and increasing power also increases the likelihood of breakage. The goal of this research is to determine whether wires thicker than the conventional 0.25 mm diameter will both optimize the cutting rate and …

    mcmaster Repository record for Optimization of Wire Diameter for Maximizing Removal Rate in Wire Electrical Discharge Machining (opens in a new tab)

  2. Process Modeling of a Wire Saw Operation

    … of timescales that characterize the overall cutting process. The slowest dynamics are associated with the evolution of the cut, which is described by a spatially dependent differential equation in time and in which the cutting rate is modeled much in the same manner as the Chemical Mechanical …

    maryland Repository record for Process Modeling of a Wire Saw Operation (opens in a new tab)

  3. An investigation into the wear characteristics of bandsaw blades and their influence on the sawing rates and costs of bandsaw operations.

    … loading, and severe wear mechanisms under metal cutting conditions. Applications of different wear mechanisms to cutting tool wear, and the problems associated with defining cutting tool life and failure criteria are discussed.Applications of dimensional analysis to the metal cutting problem are …

    sheffield-hallam Download PDF for An investigation into the wear characteristics of bandsaw blades and their influence on the sawing rates and costs of bandsaw operations. (opens in a new tab)

  4. On low consistency refining of mechanical pulps

    … a variety of pulp types, net-powers, feed flow rates, angular velocities and plate geometries was analyzed. Fibres' cutting rate and cutting location were found to be highly correlated with refiner gap. Plate geometry was also demonstrated to have a role in the fibre cutting location. Secondly, …

    ubc Repository record for On low consistency refining of mechanical pulps (opens in a new tab) Download PDF for On low consistency refining of mechanical pulps (opens in a new tab)

  5. Evaluation of excavated surface irregularities and hardness of mechanical excavations and their relationship with excavator performance

    … using a long-bladed disc cutter in a Linear Rock Cutting Machine (LCM) with the aim of establishing relationships between the cutting parameters, excavated surface parameters (underbreaks, overbreaks and hardness), and performance parameters (specific energy and cutting rate). Three-dimensional …

    must-thes Repository record for Evaluation of excavated surface irregularities and hardness of mechanical excavations and their relationship with excavator performance (opens in a new tab)

  6. Inžinerinių medžiagų abliacija ore ir vandenyje su didelio dažnio ultratrumpų impulsų lazeriu /

    … high average power at high-pulse repetition rates allowing fast and high-quality production of materials. However, cutting speed and ablation efficiency frequently suffers from heat accumulation in the material. Laser parameters are usually limited to avoid overheating or generating cracks in …

    vilnius Repository record for Inžinerinių medžiagų abliacija ore ir vandenyje su didelio dažnio ultratrumpų impulsų lazeriu / (opens in a new tab)

  7. Enhancement of the cooling performance of microchannel heat sinks

    In this report, four different strategies to enhance the cooling performance of a micro pin fin heat sink are investigated and their effect to improve its cooling efficiency are examined. The employment of nanoparticles and nano-encapsulated phase change materials (NEPCM) suspensions, as advanced …

    missouri Repository record for Enhancement of the cooling performance of microchannel heat sinks (opens in a new tab)

  8. The effect of bur wear and physico-chemical environment on the accuracy, machinability and surface damage of CAD/CAM ceramics

    … of this in vitro study was to evaluate the cutting performance and accuracy of CAD/CAM diamond burs in different chemo-mechanical conditions when machining yttria-stabilized zirconia (YTZ), lithium-disilicate, feldspathic porcelain, and double network hybrid ceramic material. The study also …

    bu Repository record for The effect of bur wear and physico-chemical environment on the accuracy, machinability and surface damage of CAD/CAM ceramics (opens in a new tab)

  9. Incorporating landscape pattern features in a spatial harvest model

    … construction cost, and 4) maximum disturbance rate (denoted by percentage of total planning area). It also has three objectives related to landscape pattern: 1) remnant patch size, 2) patch shape, and 3) inter-patch distance. Each objective is represented as an individual objective. All …

    ubc Repository record for Incorporating landscape pattern features in a spatial harvest model (opens in a new tab) Download PDF for Incorporating landscape pattern features in a spatial harvest model (opens in a new tab)

  10. An AI Approach to Tasking and Control of an Industrial Laser System

    … algorithm is developed which predicts the laser cutting rate with good accuracy. The theory of deterministic chaos was exploited to investigate laser cutting of stainless steel; a new fundamental understanding of the interaction via the energy phase portrait was established. The construction of …

    glasgow Download PDF for An AI Approach to Tasking and Control of an Industrial Laser System (opens in a new tab)

  11. Characterization of Optical Surface Grinding using Bound and Loose Abrasives

    … less damage while maintaining a fast and uniform cutting rate than traditional loose abrasive grinding.These materials are challenging for large optical surfaces due to the honeycomb structures used to lightweight the mirrors. Development is done to adapt the abrasive to handle the very low …

    arizona-thes Repository record for Characterization of Optical Surface Grinding using Bound and Loose Abrasives (opens in a new tab)

  12. Assessment of the Emission Trading Policy: A case study for the Acid Rain Program in the United States

    … is not as great as the high emissions cutting rate achieved in this program. In addition, the acid rain program lowers the compliance costs of achieving the environmental goal since the radius of the high quality coal service area doubles. Lastly, hot spots are found around the Ohio …

    waterloo Repository record for Assessment of the Emission Trading Policy: A case study for the Acid Rain Program in the United States (opens in a new tab)

  13. Making CNC Machines Smarter

    … explores using audio data for perceiving the cutting state of the machine. Experienced machinist can listen to the machine and determine how it is cutting and can assess changes for improving the cutting rate or surface finish. Ideally, the machine should be able to determine how it is cutting …

    waterloo Repository record for Making CNC Machines Smarter (opens in a new tab)

  14. Effectiveness of computer controlled robotic precision manipulator

    … produced using a wire EDM machine in which the cutting forces are relatively negligible. The manipulator is operated by four AC servo motors, two of them are for the linear manipulation along the X and Y axes and the other two motors are used for the manipulation of the rotary motions, alpha and …

    dcu Download PDF for Effectiveness of computer controlled robotic precision manipulator (opens in a new tab)

  15. Adaptive Control of Volumetric Laser Photoblation Surgery

    … device is first used to demonstrate targeted soft tissue resection in porcine brain in an open-loop fashion. This device, coined the "TumorCNC" combines 3D scanning capabilities with a steerable surgical laser. Results show high variance around target cut depths which motivats …

    duke Repository record for Adaptive Control of Volumetric Laser Photoblation Surgery (opens in a new tab)

  16. Linear and Nonlinear Viscoelastic Characterization of Proton Exchange Membranes and Stress Modeling for Fuel Cell Applications

    … applications was studied. Understanding and accurately modeling the linear and nonlinear viscoelastic constitutive properties of a PEM are important for making hygrothermal stress predictions in the cyclic temperature and humidity environment of operating fuel cells. In this study, Nafion® NRE …

    vt Repository record for Linear and Nonlinear Viscoelastic Characterization of Proton Exchange Membranes and Stress Modeling for Fuel Cell Applications (opens in a new tab)

  17. Há influência do ciclo de corte sobre a energia útil oriunda da madeira de espécies da caatinga?

    … forest management, it takes place under a cutting cycle established in regulations, but without scientific evidence regarding the sustainability of the adopted model, nor is the amount of energy stored per area, since the extraction of wood occurs primarily as a fuel source. Within this …

    brazil-ufrn Repository record for Há influência do ciclo de corte sobre a energia útil oriunda da madeira de espécies da caatinga? (opens in a new tab)

  18. Řezné nástroje při výrobě zbraňových součástek

    Diplomová práce je zaměřena na problematiku řezných nástrojů, jejich opotřebení, trvanlivost, řezné podmínky. Je zde proveden základní rozbor technologie dvou vybraných dílů. Dále je zde uveden rozbor dodavatelů řezných nástrojů. Jsou zde stručně charakterizovány základní druhy opotřebení a jejich …

    brno-tech Repository record for Řezné nástroje při výrobě zbraňových součástek (opens in a new tab)