Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 223 for “"cutting speed"”.

  1. The Effects of Machining on Structure and Tribological Properties of Ultra High Molecular Weight Polyethylene for Artificial Joint Prostheses

    … properties. Machining parameters include cutting speed, tool feed rate and depth of cut. Temperature rise was studied during machining to assess the extent of thermal degradation due to machining. Polymeric structure of the semicrystalline polymer was characterized using differential …

    eiu Repository record for The Effects of Machining on Structure and Tribological Properties of Ultra High Molecular Weight Polyethylene for Artificial Joint Prostheses (opens in a new tab)

  2. Machinability of stainless steel alloys

    … on the influence of different parameters such as cutting speed, feed rate and depth of cut on the surface roughness, cutting forces, burr formation and chip formation. A great emphasis is put on the materials interactions with the machining process. For these machining tests, specimens were …

    ets-quebec Download PDF for Machinability of stainless steel alloys (opens in a new tab)

  3. Lazerinis nerūdijančio plieno lakštų pjovimas: greičio didinimas optimizuojant parametrus /

    Laser cutting of thin stainless-steel sheets is widely used in modern industry due to its high precision, flexibility, and ability to process components with complex geometries. However, one of the main limiting factors of this technology remains insufficient cutting speed, which directly …

    vilnius Repository record for Lazerinis nerūdijančio plieno lakštų pjovimas: greičio didinimas optimizuojant parametrus / (opens in a new tab)

  4. Optimization of machining parameters with consideration of tool adjustment in turning operations.

    … pass selection for determining optimum cutting speed, feed rate, depth of cut, dimension deviation and number of passes. The second is a single-product multi-pass model considering inventory and setup costs to find optimum cutting speed, feed rate, depth of cut, dimension deviation and …

    ottawa-retro Repository record for Optimization of machining parameters with consideration of tool adjustment in turning operations. (opens in a new tab)

  5. Machinability of aluminum 7075 alloys

    … The primary objective is to explore how cutting parameters (cutting speed and feed rate), heat treatment, alloy composition, and cooling methods influence three key machinability factors: surface roughness, cutting force, and particle emission. In the initial phase of the investigation, …

    ets-quebec Download PDF for Machinability of aluminum 7075 alloys (opens in a new tab)

  6. The effect of cutting condition selection on tool life in sand milling

    … the problem of determining what effect selected cutting conditions have on tool wear and tool life in robotic sand milling (RSM) operations. The purpose of this study was to analyze the tool wear mechanisms and characteristics that govern the RSM process. The purpose was also to establish an …

    northern-iowa Repository record for The effect of cutting condition selection on tool life in sand milling (opens in a new tab)

  7. Micromilling of hardened (62 HRC) AISI D2 cold work tool steel

    … terms of tool life/tool wear, surface roughness, cutting forces, burr formation, slot geometry accuracy and workpiece surface integrity. The influence of operating parameters (cutting speed, feed rate and depth of cut) on tool life, surface roughness, burr width and cutting forces was evaluated …

    birmingham Download PDF for Micromilling of hardened (62 HRC) AISI D2 cold work tool steel (opens in a new tab)

  8. Heat transfer during pulsed laser cutting of thin sheets

    … of the temperature field during pulsed laser cutting of thin sheets (approximately 2.5 x l0⁻⁵ m) was developed. Cutting was simulated through removal of nodes from a finite difference scheme based on sensible heating to the phase change temperature and a single value of latent heat (melting or …

    vt Repository record for Heat transfer during pulsed laser cutting of thin sheets (opens in a new tab)

  9. Micromilling of Wrought H13 Tool Steel

    … surface finish compared to other coatings. A low cutting speed of 20m/min significantly produced lower and stable surface finish compared to those after 40 m/min cutting speed.

    tamu Repository record for Micromilling of Wrought H13 Tool Steel (opens in a new tab)

  10. Ultrasonic bone cutting

    … thesis reports on the design of ultrasonic bone cutting blades and the effect of various cutting parameters such as applied load, blade tip vibration velocity and frequency on cutting speed and temperature, two performance indicators used by orthopaedic clinicians. A range of high gain blades was …

    glasgow Download PDF for Ultrasonic bone cutting (opens in a new tab)

  11. Machining of silicon wafers with an abrasive water jet cutter

    … of a study of the effects of abrasive water jet cutting on brittle silicon substrates. In total, 26 different cuts were made in a single crystal silicon substrate with an abrasive water jet cutter under different conditions of water flow, water pressure, and abrasive flow rate. These cuts were …

    njit Repository record for Machining of silicon wafers with an abrasive water jet cutter (opens in a new tab)

  12. Nuo apatinės bandinio pusės lazeriniu būdu apdirbto stiklo lenkimo stiprio tyrimai /

    … in high-quality mode (25.9 W, 200 kHz, effective cutting speed 0.90 mm/s). The average size of front side surface cracks was 102 μm and rear side - 143 μm. Front side flexural strength was 82 MPa, when rear side was 77 MPa. IIns type was cut using nanosecond laser in high-efficiency mode (19.5 W, …

    vilnius Repository record for Nuo apatinės bandinio pusės lazeriniu būdu apdirbto stiklo lenkimo stiprio tyrimai / (opens in a new tab)

  13. Analytical and experimental studies in laser cutting

    New laser cutting methods are constantly sought to improve productivity and to enhance cut quality which, in turn, will assist in reducing production costs, and obtaining tighter tolerances and smoother surfaces. In this work, the effect of a line beam, produced by a cylindryical-spherical lens, on …

    iastate Repository record for Analytical and experimental studies in laser cutting (opens in a new tab)

  14. Study of temperature in the edge milling of carbon fiber-reinforced plastic (CFRP)/Ti6Al4V stack material for aerospace industry

    … we study the effects of cutters while varying cutting speed, feed per tooth and radial depth of cut on the forces, roughness and tool wear for the different types of cutters. We found that, as opposed to what was previously thought, the feed factor is the most influent one regarding the cutting …

    ets-quebec Download PDF for Study of temperature in the edge milling of carbon fiber-reinforced plastic (CFRP)/Ti6Al4V stack material for aerospace industry (opens in a new tab)

  15. Mist and Microstructure Characterization in End Milling Aisi 1018 Steel Using Microlubrication

    … is primarily used to cool and lubricate the cutting tool and workpiece interface during a machining process. But the adverse health effects caused by the use of flood coolants are drawing manufacturers' attention to develop methods for controlling occupational exposure to cutting fluids. …

    unt Repository record for Mist and Microstructure Characterization in End Milling Aisi 1018 Steel Using Microlubrication (opens in a new tab)

  16. A Study on Ultrasonic Vibration Cutting of Difficult-to-cut Materials

    In this thesis, conventional ultrasonic vibration cutting (CUVC) and ultrasonic elliptical vibration cutting (UEVC) methods are studied and applied to two difficult-to-cut materials. Firstly, theoretical study reveals that the CUVC mechanism is influenced by: 1) tool vibration frequency, 2) …

    nus Repository record for A Study on Ultrasonic Vibration Cutting of Difficult-to-cut Materials (opens in a new tab) Download file for A Study on Ultrasonic Vibration Cutting of Difficult-to-cut Materials (opens in a new tab)

  17. Machinability studies of high strength materials: steel (277 BHN)

    … reliable machining data in terms of tool life, cutting force and surface finish in relation to cutting speed, feed rate and depth of cut. During this research cutting tests were carried out by using both one variable-at-a-time and design of experiment approaches. For one-variable-at-a-time …

    dcu Download PDF for Machinability studies of high strength materials: steel (277 BHN) (opens in a new tab)

  18. Development of Hard PVD Coating Systems for Machining Austenitic Stainless Steels

    … productivity and avoiding high temperature in cutting zone. Cutting speed as a one of the major factors of productivity, significantly increase the heat generation and temperature in cutting zone. Therefore, using protective coatings with higher thermal stability is required to maintain the …

    mcmaster Repository record for Development of Hard PVD Coating Systems for Machining Austenitic Stainless Steels (opens in a new tab)

  19. How Micro-Geometry of Cutting Edges Influences Surface Integrity

    … thesis quantitatively evaluates the impact of cutting edge micro-geometry. Specifically, how edge radius and symmetry affect surface integrity during the machining of Ti- 6Al-4V. A fundamental experimental study has been conducted to investigate how changes in a cutting edge’s sharpness and …

    chalmers Repository record for How Micro-Geometry of Cutting Edges Influences Surface Integrity (opens in a new tab)

  20. Machinability study of tool steel (Din 1.2311) through end milling

    … reliable machining data in terms of tool life, cutting force and surface finish in relation to cutting speed, feed rate and depth of cut. During this research, cutting tests were carried by using the both the design of experiment and one-variable-at-a-time experimental techniques. Various …

    dcu Download PDF for Machinability study of tool steel (Din 1.2311) through end milling (opens in a new tab)

Page 1 of 12