Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 104 for “"cyclic testing"”.
-
Behaviour of Magnesium Alloy Under Load-Control Cyclic Testing
… magnesium alloys have been conducted under cyclic stress- and strain-control conditions. However, many engineering components are subjected to cyclic bending moments or load-control cyclic conditions. These conditions can be provided by a rotating bending test (RBT), which is usually …
-
Cyclic testing and assessment of shape memory alloy recentering systems
In an effort to mitigate damage caused by earthquakes to the built environment, civil engineers have been commissioned to research, design, and build increasingly robust and resilient structural systems. Innovative means to accomplish this task have emerged, such as integrating Shape Memory Alloys …
-
Cyclic Testing of Special Moment Frame Connections With Buckling-Restrained Fuse Plates
… W24) to investigate connection behavior under cyclic loading. The experiments examined the influence of fuse plate geometry, bolt configuration, and buckling-restraints on strength, ductility, and deformation capacity. Results indicated that the buckling-restraint washers and bolts were …
-
Plastic instability of platinum modified and unmodified aluminide coatings during 1100 C cyclic testing
… the Naval Postgraduate School on the effect of cyclic oxidation at 1100C on platinum modified and unmodified aluminide coated nickel base superalloy (I-738), a surface deformation described as rumpling was first reported. Rumpling was found to be a function of the number and type of thermal …
-
Plastic instability of aluminide and platinum modified diffusion coatings during 1100˚C cyclic testing.
… and surface structure changes during cyclic oxidation at 1100˚C was begun. During this testing, significant surface deformation described as rumpling was observed and attributed to plastic instability produced during the cycling. Rumpling is found to be a function of the number and …
-
Cyclic testing of concrete-filled circular steel tube bridge columns having encased fixed-based detail.
… load, combined axial and bending forces, and cyclic forces. Analytical work was performed to ensure that the test columns chosen would be representative of full-scale bridge piers found in North America. The foundation detail was designed to ensure that the full moment capacity of the …
-
Cyclic Testing of a Skewed Special Moment Frame RBS Connection Having a Composite Concrete Slab
… This study experimentally evaluates the cyclic behavior of a full-scale double-sided skewed SMF RBS specimen having a composite concrete slab. During the imposed beam rotations defined by the SMF prequalification protocol, beam twisting was observed to reduce demands at the RBS and reduce …
-
Significance of orientation and determination of cummulative damage measures during cyclic testing of human thoracolumbar spine.
… Although a limited amount of data for cyclic loading is currently available, the tests are not completely documented and the loads, spine segment positioning, and frequency are not representative of those typically found during normal activities. The purpose of this study is to develop …
-
Out-of-plane stability of reinforced masonry shear walls under seismic loading : in-plane reversed cyclic testing
… The first phase involved the experimental testing of full-scale reinforced masonry (RM) column-like specimens subjected to uniaxial cyclic tension-compression loading. The testing provided valuable insight into the out-of-plane instability as it occurs in RM. The second phase of the …
-
Cyclic Testing of Pre-engineered Beam-Hanger Connections & Reinforcement of Holes in Glulam Beams Using Self-tapping Screws
… of pre-engineered beam-hanger connections under cyclic loading, and the second evaluates the reinforcement of holes in glulam beams using self-tapping screws. Chapter 3 describes laboratory testing of the Megant 430x150x50 beam-hanger connector under applied interstorey drift deflections based on …
-
Large-Scale Cyclic Testing and Development of Ring Shaped - Steel Plate Shear Walls for Improved Seismic Performance of Buildings
… analyses. Next, five large-scale, quasi-static, cyclic experimental tests were conducted in the Thomas M. Murray Structures Laboratory at Virginia Tech. The large-scale experiments validated the system performance and provided data on the boundary frame forces, infill panel shear deformation …
-
In-Plane Cyclic Testing of Reinforced Concrete Masonry Walls to Assess the Effect of Varying Reinforcement Anchorage and Boundary Conditions
The design of reinforced masonry walls for in-plane shear according to the current Canadian masonry standard CSA S304.1 is quite conservative. So an extensive experimental program was designed to observe the quasi-static performance of partially grouted reinforced masonry walls with variable …
-
A COMPARISON OF COMPOSITE MATERIAL FAILURE UNDER CYCLIC AND BLOCK AMPLITUDE LOADING
… quasi-isotropic GFC and cross-ply samples to cyclic loading at multiple percentages of their ultimate tensile strength. This testing generated S-N curves for these composites. Further block amplitude cyclic testing of the notched samples was conducted. The results of the cyclic and stepped …
-
Wind Performance of Sheathing-to-Rafter Connection of HUD Code Wind Zone II and III Manufactured Homes
… and wind performance. A two-step quasi-static cyclic testing protocol, that started with monotonic testing which informs the second step of cyclic testing, was used to quantify fastener uplift capacity. This investigation presents comparisons across different fastener types, rafter species and …
-
Accelerated Test Method (ATM) for the Evaluation of External Sulfate and Chloride Attack on Concrete Using Artificial Climate Environment (Ace): An Assessment of Methodology
This study seeks to investigate a testing methodology that utilizes accelerated testing methods (ATM) in conjunction with nondestructive testing methods (NDT) to assess destructive ion attacks on concrete. Through the testing of concrete samples, the impacts of chloride and sulfate ions on concrete …
-
Mechanical and FatigueTesting of Rapid Prototyped Aerospace Titanium Component by Electron Beam Melting Process
… Ti-6Al-4V EBM components were subjected to cyclic loading and monotonic loading tests. The results indicated that the EBM component did not fail before the fasteners in both tests. This was a preliminary study regarding an attempt to model an EBM component to validate the physical tests. An …
-
Membrane Hinges for Deployable Systems
… hinges include reliability after repeated cyclic loading and predictability of a large deployable with radially-unconstrained membrane hinges. The research presented includes the cyclic testing and a design analysis of membrane hinges in deployable systems. Additionally, demonstrations of …
-
Damping and flexural properties of prestressed concrete members subjected to reversed cyclic loading
… damping. Part two describes the reversed cyclic testing of prestressed concrete members: end moments were applied to the members to simulate earthquake loading, and measurements were made of stiffness and damping energy. An analytical method of obtaining moment - rotation curves for …
-
Effect of a derivatized oxide layer and environment on the bond durability of aluminum/polyimide and titanium/polyimide bonds
… adhesive in a wedge test geometry. Environmental testing consisted of static and cyclical exposure for 240 hours in three atmospheres: 1) 170°C, 2 torr; 2) -20°C; 3) 60°C, 70% relative humidity. Crack propagation arrested within 48 hours. The order of durability in static environmental tests for …
-
Stiffness-Tailored Digital Materials for Additively Manufactured Prosthetic Sockets
… composites can tailor the Young’s modulus. Cyclic testing validated their structural integrity and durability. These results demonstrated that FFF voxel-based composites have potential in manufacturing highly tailored sockets.
Page 1 of 6