Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 30 for “"damage mode"”.

  1. In-situ detection and assessment of low velocity impact-induced damage in composite materials using developed fibre optic sensor technology

    … signal feature extraction and identification of damage modes based on impact data from the Bragg gratings is investigated by applying the wavelet transforms. The method proved to be promising for future application in impact signals from fibre optic sensors. A further development of the …

    soton Download PDF for In-situ detection and assessment of low velocity impact-induced damage in composite materials using developed fibre optic sensor technology (opens in a new tab)

  2. Structural studies of various β-aluminas

    … materials are also discussed. The most common damage mode in the β" -aluminas, due to electron beam irradiation, is the loss of the mobile-ion containing planes, and the subsequent collapse and shear of the structure to form broad defect spinel blocks. It is shown that collapse vectors …

    oxford Repository record for Structural studies of various β-aluminas (opens in a new tab)

  3. Creep, Fatigue and Creep-Fatigue Interactions in Modified 9% Cr - 1% Mo (P91) Steels

    … with oxidation, can accelerate the kinetics of damage accumulation and consequently reduce such components' life. Hence, reliable C-F test data is required for meticulous consideration of C-F interactions and oxidation, which in turn is vital for sound design practices. It is also imperative to …

    arkansas Repository record for Creep, Fatigue and Creep-Fatigue Interactions in Modified 9% Cr - 1% Mo (P91) Steels (opens in a new tab)

  4. Computational approach to displacement damage metrics for semiconductor materials in neutron environments

    Neutron displacement damage in electronic devices provides challenges for operating in radiation environments. Providing adequate metrics for quantifying displacement damage is critical for operating in these extreme conditions. Previous metrics did not directly take into consideration the damage …

    texas Repository record for Computational approach to displacement damage metrics for semiconductor materials in neutron environments (opens in a new tab)

  5. Optical fatigue of dielectric coatings in the femtosecond regime: physical mechanisms and metrology /

    The decrease of laser-induced damage threshold (LIDT) of materials when irradiated with multiple laser pulses, the fatigue effect, is observed in most types of solids. However, the physical nature of fatigue and its extrapolation is still an active area of research. We are generally no longer …

    vilnius Repository record for Optical fatigue of dielectric coatings in the femtosecond regime: physical mechanisms and metrology / (opens in a new tab)

  6. Punching Shear and Flexural Capacity Modeling and Experimental Testing of Bridge Slab Segments

    … shear failure is a common bridge deck damage mode in which a high concentrated load, typically from the wheel of a heavy vehicle, induces a localized shear failure conducted through the full-depth of the slab. This research project discussed hereafter investigated the structural …

    tamu Repository record for Punching Shear and Flexural Capacity Modeling and Experimental Testing of Bridge Slab Segments (opens in a new tab) Embargoed until 2027-12-01

  7. Punching Shear and Flexural Capacity Modeling and Experimental Testing of Bridge Slab Segments

    … shear failure is a common bridge deck damage mode in which a high concentrated load, typically from the wheel of a heavy vehicle, induces a localized shear failure conducted through the full-depth of the slab. This research project discussed hereafter investigated the structural …

    tamu Repository record for Punching Shear and Flexural Capacity Modeling and Experimental Testing of Bridge Slab Segments (opens in a new tab) Embargoed until 2027-12-01

  8. Punching Shear and Flexural Capacity Modeling and Experimental Testing of Bridge Slab Segments

    … shear failure is a common bridge deck damage mode in which a high concentrated load, typically from the wheel of a heavy vehicle, induces a localized shear failure conducted through the full-depth of the slab. This research project discussed hereafter investigated the structural …

    tamu Repository record for Punching Shear and Flexural Capacity Modeling and Experimental Testing of Bridge Slab Segments (opens in a new tab) Embargoed until 2027-12-01

  9. Punching Shear and Flexural Capacity Modeling and Experimental Testing of Bridge Slab Segments

    … shear failure is a common bridge deck damage mode in which a high concentrated load, typically from the wheel of a heavy vehicle, induces a localized shear failure conducted through the full-depth of the slab. This research project discussed hereafter investigated the structural …

    tamu Repository record for Punching Shear and Flexural Capacity Modeling and Experimental Testing of Bridge Slab Segments (opens in a new tab) Embargoed until 2027-12-01

  10. Micromechanics characterization of sublaminate damage

    "A micromechanics analytical model is developed for predicting the fracture behavior of a fiber reinforced composite laminate with sub laminate damage. The model is also modified to facilitate the study of an interface crack in a bimaterial system and the thermal and moisture effects. The …

    must-thes Repository record for Micromechanics characterization of sublaminate damage (opens in a new tab)

  11. EFFECTS OF PHOTO OXIDATION ON THE MECHANICAL BEHAVIOR OF POLYMERIC MATERIALS : AN EXPERIMENTAL STUDY

    … periods ranging from 1 to 150 days. Chemical damage is characterized by the FTIR, DSC and Swelling tests which help us to monitor the change in the chemical composition of the materials along the aging durations and conditions. Mechanical damage is characterized by uniaxial tensile failure …

    msu Repository record for EFFECTS OF PHOTO OXIDATION ON THE MECHANICAL BEHAVIOR OF POLYMERIC MATERIALS : AN EXPERIMENTAL STUDY (opens in a new tab)

  12. Stress transfer, stiffness degradation and transverse cracking in composite laminates

    … has been well recognised that the core to this damage mode is stress singularities near transverse cracks. In addition, transverse cracking may cause degradation in the thermoelastic properties of a laminate, and meanwhile new ply cracks usually form with the increase of applied loading. As a …

    whiterose Download PDF for Stress transfer, stiffness degradation and transverse cracking in composite laminates (opens in a new tab)

  13. A model for time-independent and time-dependent damage evolution and their influence on creep of multidirectional Polymer composite laminates

    … to this degradation comes from various damage modes developed in the plies of the composite with time and identified in this thesis as TDD (Time Dependent Damage). These damage modes may also develop due to process-induced residual stresses, and during loading to the service load, …

    manitoba Repository record for A model for time-independent and time-dependent damage evolution and their influence on creep of multidirectional Polymer composite laminates (opens in a new tab)

  14. Interfacial Disulfide Chemistry and Plasma Surface Activation for Fatigue Healing in Carbon Fiber / UHMWPE Composites

    … unidirectional tapes, or woven fabrics. The main damage mode for these laminates is fatigue-driven delamination growth. Under cyclic loading, sub-critical delamination can propagate at energy release rates far below the static fracture toughness. These flaws accumulate with each cycle until …

    ut-knoxville Repository record for Interfacial Disulfide Chemistry and Plasma Surface Activation for Fatigue Healing in Carbon Fiber / UHMWPE Composites (opens in a new tab)

  15. An efficient virtual testing framework to simulate the progression of damage in notched composite laminates

    The progression of damage in composite laminates is influenced by the interactions of several failure/damage mechanisms including matrix cracking, fibre breakage, splitting and delamination. In capturing detailed prediction of various damage modes, it is important to maintain the efficiency of the …

    ubc Repository record for An efficient virtual testing framework to simulate the progression of damage in notched composite laminates (opens in a new tab) Download PDF for An efficient virtual testing framework to simulate the progression of damage in notched composite laminates (opens in a new tab)

  16. Crack Initiation Modeling of a Directionally-Solidified Ni-base Superalloy

    … to periodic replacement as a result of cracking, damage, and mechanical property degeneration that render them unsafe for continued operation. In view of the significant costs associated with inspecting, servicing, and replacing damaged components, there has been much interest in developing models …

    gatech Repository record for Crack Initiation Modeling of a Directionally-Solidified Ni-base Superalloy (opens in a new tab)

  17. Study of rotational fretting of quenched and tempered 4340 steel

    … material properties are altered leading to damage or failures. Fretting conditions are obtained by controlling externally applied parameters such as load, frequency of displacement, displacement amplitude. Material properties which influence fretting behavior include hardness, ductility, …

    gatech Repository record for Study of rotational fretting of quenched and tempered 4340 steel (opens in a new tab)

  18. Understanding the damage accumulation and tensile strength in carbon fibre reinforced polymers using high resolution <i>in situ</i> computed tomography

    … due to the lack of reliable predictive models for their mechanical properties. The objective of this thesis is to reach a higher level of understanding of the damage accumulation processes occurring in tensile loaded carbon fibre reinforced polymer systems to advance the development of …

    soton Download PDF for Understanding the damage accumulation and tensile strength in carbon fibre reinforced polymers using high resolution <i>in situ</i> computed tomography (opens in a new tab)

  19. Multiscale modeling of damage in multidirectional composite laminates

    The problem of damage accumulation in laminated composite materials hasreceived much attention due to their widespread application in the aerospace, automotive,civil, and sports industries. In the aerospace industry, composites are usedto make light weight and efficient structural components. In …

    tamu Repository record for Multiscale modeling of damage in multidirectional composite laminates (opens in a new tab)

  20. An analysis of transportation asset damage and repair costs after inland flood events

    … transportation infrastructure every year due to damage suffered from floods. With the major drive within the transportation agencies to consider the risks associated with the transportation asset damages and the push to provide optimized plans for pre-event mitigation and post-event recovery, …

    iastate Repository record for An analysis of transportation asset damage and repair costs after inland flood events (opens in a new tab)

Page 1 of 2