Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 14 of 14 for “"damage morphology"”.

  1. A Technique for Increasing the Optical Strength of Single-Crystal NaCl and KCl Through Temperature Cycling

    … single-crystal samples. The 1.06-μm pulsed laser damage thresholds were increased by factors as large as 4.6 for a bulk NaCl single-crystal sample. The bulk laser damage breakdown threshold (LDBT) of the crystal was measured prior to and after heat treatment at 800*C using a Nd:YAG laser operating …

    unt Repository record for A Technique for Increasing the Optical Strength of Single-Crystal NaCl and KCl Through Temperature Cycling (opens in a new tab)

  2. Time-dependent circumferential deformation of cortical bone subjected to internal radial loading

    … constant load until failure, and (c) assess damage morphology and determine the damage mechanisms in cortical bone due to a radial load.;A test fixture was used to apply internal pressure to cylindrical bone specimens. Hoop strain was measured on the surface of the cylindrical specimens. …

    wvu Repository record for Time-dependent circumferential deformation of cortical bone subjected to internal radial loading (opens in a new tab)

  3. Tolerância ao dano devido ao impacto de baixa velocidade em compósito não convencional (double-double)

    … tests were conducted at energy of 74 J and damage areas were examined using x-ray computed tomography. Measured compressive strength and compression after impact (CAI) strength were equivalent for double-double and quadriaxial laminates. However, differences in impact damage morphology were …

    brazil-ufrn Repository record for Tolerância ao dano devido ao impacto de baixa velocidade em compósito não convencional (double-double) (opens in a new tab)

  4. Investigation of low-velocity impact damage in a discontinuous long fiber reinforced polymer composite

    … low-velocity impact (LVI) response, post-impact damage morphology, and detection reliability of Prepreg Platelet Molded Composites (PPMC), a class of long discontinuous fibre-reinforced polymers characterized by a stochastic meso-structure. A finite element framework is developed to simulate the …

    ubc Repository record for Investigation of low-velocity impact damage in a discontinuous long fiber reinforced polymer composite (opens in a new tab) Download PDF for Investigation of low-velocity impact damage in a discontinuous long fiber reinforced polymer composite (opens in a new tab)

  5. Effects of Property Gradients on Spall Damage: A Multiscale Investigation

    Spall damage nucleation is incredibly sensitive to microstructure (1; 2). This presents a unique challenge because both high-strain-rate effects and microstructural features can be difficult, even impossible, to capture experimentally, and prove to be challenging to model in simulations as well. …

    tamu Repository record for Effects of Property Gradients on Spall Damage: A Multiscale Investigation (opens in a new tab) Embargoed until 2026-12-01

  6. Damages in Transparent Materials by Ultrashort Laser Pulse

    … glass, fused silica and sapphire. We investigate damage inside the bulk of borosilicate glass, fused silica, and sapphire by a single shot of IR picosecond laser pulse experimentally. In our experiments, extended bulk damage tracks with an aspect ratio of about 1:10 are generated. The damage …

    arizona-thes Repository record for Damages in Transparent Materials by Ultrashort Laser Pulse (opens in a new tab)

  7. High-temperature erosion of Haynes and Waspaloy

    … g/s. The changes in erosion are related to the damage morphology which was studied extensively by scanning electron microscopy. In addition, a phenomenological model for erosion is also included.

    iastate Repository record for High-temperature erosion of Haynes and Waspaloy (opens in a new tab)

  8. Development, Characterization, and Modeling of Ballistic Impact on Composite Laminates Under Compressive Pre-Stress

    … com-pressive pre-stress. Residual properties, damage characterization, and energy absorption were compared to determine synergistic effects of in-plane compressive pre-stress and impact velocity. A fixture was developed to apply in-plane compressive loads up to 30 tons to structural composites …

    uab Repository record for Development, Characterization, and Modeling of Ballistic Impact on Composite Laminates Under Compressive Pre-Stress (opens in a new tab)

  9. Laser-induced desorption and damage of water- and heavy water-dosed optical thin films.

    … of correlation between (1) laser-induced damage and defects and (2) laser-induced desorption and adsorption sites for some of the samples listed above. Attempts to deuterate and hydrate CaF₂ thin films met with limited success as laser-induced desorption samples. Other analysis techniques …

    arizona-thes Repository record for Laser-induced desorption and damage of water- and heavy water-dosed optical thin films. (opens in a new tab)

  10. FULL-FIELD DAMAGE ASSESSMENT OF NOTCHED CFRP LAMINATES

    … experimental techniques to the comprehensive damage assessment of open-hole compression (OHC) in composite laminates, under both static and fatigue loading. The relevance of the work comes from OHC being one of the two main tests used in industry to measure damage tolerance of composite …

    whiterose Download PDF for FULL-FIELD DAMAGE ASSESSMENT OF NOTCHED CFRP LAMINATES (opens in a new tab)

  11. Third-harmonic generation for efficient frequency conversion and microscopic imaging

    … THM was also applied to characterize laser damage morphology. We studied the TH signal generated by a weak probe beam intersecting transversely a pump laser-induced plasma in air and developed a model for the generation of such signal. Unlike in previous experiments, the intensity of the …

    unm Repository record for Third-harmonic generation for efficient frequency conversion and microscopic imaging (opens in a new tab)

  12. Modeling Zirconium Under Neutron Irradiation: Interatomic Potentials, Displacement Cascades, and Electron-Ion Coupling

    … α-Zr. The study examined defect generation, damage morphology and diffusion behaviour. For this purpose, a novel post-processing technique was developed. Self-interstitial atom (SIA) clusters displayed greater anisotropy than equilibrium clusters. 1D and 2D diffusion modes were observed. …

    queens Repository record for Modeling Zirconium Under Neutron Irradiation: Interatomic Potentials, Displacement Cascades, and Electron-Ion Coupling (opens in a new tab)

  13. Competition of fracture and hydrodynamic effects in aerospace composites and ceramics under hypervelocity impact, The

    … were conducted on roll-wrapped CFRP tubes, with damage morphology tracked through shadowgraph imaging, X-ray computed tomography, and compression-after-impact testing. The results demonstrated localized damage and a strong correlation between delamination area and residual strength reduction. …

    colo-mines Repository record for Competition of fracture and hydrodynamic effects in aerospace composites and ceramics under hypervelocity impact, The (opens in a new tab)

  14. Recognition and classification of laser damage modes using image analysis methods and convolutional neural networks /

    Laser-induced damage is one of the limiting factors in high-power optical systems, because even small defects, contamination particles, or local coating inhomogeneities can initiate damage and reduce the lifetime of optical components. The early stage of this process is especially important, since …

    vilnius Repository record for Recognition and classification of laser damage modes using image analysis methods and convolutional neural networks / (opens in a new tab)