Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 56 for “"damage parameters"”.

  1. Characterizing Deformation, Damage Parameters, and Clay Composition in Fault Zones: Insights from the Chelungpu Thrust, Taiwan, and Mozumi Right Lateral Fault, Japan

    … Chelungpu fault has a 10-30 m wide primary damage zone characterized by dense fractures and chemical alteration. The southern Chelungpu fault has a 25-70 m wide primary damage zone characterized by dense fractures, alteration, intensely sheared rock, and secondary faults. The complexity of …

    utahstate Repository record for Characterizing Deformation, Damage Parameters, and Clay Composition in Fault Zones: Insights from the Chelungpu Thrust, Taiwan, and Mozumi Right Lateral Fault, Japan (opens in a new tab)

  2. Damage growth in bending of composite beams

    … growth, characterization and measurement of damage in unidirectional and cross-ply composite beams. Beams were tested in three-point static and cyclic bending. Following damage initiation, either by a machined notch or by repeated cycling, damage growth has been characterized by two damage …

    ubc Repository record for Damage growth in bending of composite beams (opens in a new tab) Download PDF for Damage growth in bending of composite beams (opens in a new tab)

  3. IGFEM-based reduced-order modeling and design of nonlinear composites

    … Method (IGFEM). Cohesive interfacial failure and damage mechanisms in the constituents are the primary source of nonlinearity and the shape of material interfaces and nonlinear damage parameters are the key design variables used to obtain desired nonlinear macroscopic behaviors. Several …

    uiuc Repository record for IGFEM-based reduced-order modeling and design of nonlinear composites (opens in a new tab)

  4. Modeling the post shear failure behavior of reinforced concrete columns

    … column behavior and require several nonphysical damage parameters to be defined. In contrast, the proposed calibrated model provides the engineering community with a valuable tool that only requires the input of column material and geometric properties to simulate column behavior up to loss of …

    texas Repository record for Modeling the post shear failure behavior of reinforced concrete columns (opens in a new tab)

  5. Vibration-based finite element model updating and structural damage identification

    Damage and material deterioration could lead to structural failure with unknown consequences. Structural health monitoring strategy based on vibration measurements for existing aging structures offers a promising technique for effectively managing the deteriorating structures. The main objectives …

    greenwich Download PDF for Vibration-based finite element model updating and structural damage identification (opens in a new tab)

  6. Dead wood and decomposition in a tropical forest : vertical patterns, long-term processes, and the role of lightning.

    … and lightning characteristics to model lightning damage parameters (heating and power) for trees of different species and size classes (Chapter 4). These damage parameters differ substantially among species, suggesting that increased lightning frequency will change inputs of woody debris. These …

    louisville Repository record for Dead wood and decomposition in a tropical forest : vertical patterns, long-term processes, and the role of lightning. (opens in a new tab)

  7. Elastic Properties, Strength and Damage Tolerance of Pultruded Composites

    … layer was used for the finite element study. The damage resistance and damage tolerance were investigated experimentally. Using a quasi-static indentation loading, damage was induced at various incrementally increased force levels to investigate the damage growth process. Damage parameters were …

    odu Repository record for Elastic Properties, Strength and Damage Tolerance of Pultruded Composites (opens in a new tab)

  8. Sparse reconstruction and analysis of guided wavefields for damage detection and quantification

    … to the local detection and the evaluation of damages. NDE is often characterized by off-line inspection requiring a cumbersome equipment. On the other hand, SHM generally aims at monitoring the condition of the structure during its regular operating cycle, ideally with embedded sensors. Guided …

    gatech Repository record for Sparse reconstruction and analysis of guided wavefields for damage detection and quantification (opens in a new tab)

  9. Development of a Progressive Failure Model for Notched Woven Composite Laminates

    … NASA is seeking a method for predicting the damage initiation and propagation of woven fabric composites in order to utilize these materials effectively in SLS hardware. This work focuses on notched woven fabric composites under tensile loading. An analytical model consisting of a macro-level …

    vt Repository record for Development of a Progressive Failure Model for Notched Woven Composite Laminates (opens in a new tab)

  10. Modeling ductile fracture in ship structures with shell elements

    … the analysis. This thesis investigates the damage process of shell elements under multi-axial tension. Emphasis is placed on the combined effects of stress state and element size. A novel numerical approach is presented that provides an equivalent plane stress material curve up to the point …

    aalto Repository record for Modeling ductile fracture in ship structures with shell elements (opens in a new tab)

  11. Immunohistochemical-based analyses of thrombo-inflammation following liver injury

    … thermal, or LPS-induced liver damage. To investigate the influence of platelets, livers were extracted and subjected to immunohistochemical analyses using (intravital) confocal microscopy to assess neutrophil-infiltration by counting and liver damage parameters via ELISA. …

    wurz-thes Repository record for Immunohistochemical-based analyses of thrombo-inflammation following liver injury (opens in a new tab)

  12. Advanced analytical models for well injectivity decline

    … and Young’s modulus are the most influential parameters defining the cake thickness profile. The thesis presents the development of an analytical model for axi-symmetric two-phase flow with simultaneous deep bed filtration of injected particles, formation of external filter cake and its …

    adelaide Repository record for Advanced analytical models for well injectivity decline (opens in a new tab)

  13. Moisture-Induced Damage Characterization of Asphalt Mixes: A Chemical, Thermodynamic and Mechanistic Approach

    Moisture-induced damage is one of the major distresses which leads to the deterioration of mechanical properties of asphalt mixes and failure of asphalt pavements. Evaluation of the moisture-induced damage potential is a challenging task because a number of factors including physical and chemical …

    oklahoma-thes Repository record for Moisture-Induced Damage Characterization of Asphalt Mixes: A Chemical, Thermodynamic and Mechanistic Approach (opens in a new tab)

  14. Multi-scale mechanism based life prediction of polymer matrix composites for high temperature airframe applications

    … is outlined to determine cohesive stress and damage evolution parameters for pristine as well as isothermally aged (in air) polymer matrix composites. A rate-dependent viscoelastic cohesive layer model was implemented in an in-house FEA code to simulate the delamination initiation and …

    alabama Repository record for Multi-scale mechanism based life prediction of polymer matrix composites for high temperature airframe applications (opens in a new tab)

  15. Thermal shock resistance parameters for the industrial lining problem

    … to fracture initiation and resistance to damage parameters which account for the influence of thermal and mechanical properties, geometry, and temperature range, while distinguishing between the heating and cooling cases. The resistance to fracture initiation parameter ɸs is the maximum …

    ubc Repository record for Thermal shock resistance parameters for the industrial lining problem (opens in a new tab) Download PDF for Thermal shock resistance parameters for the industrial lining problem (opens in a new tab)

  16. An experimental investigation of homogeneous fatigue damage in a random short-fiber composite under combined tension-torsion loading

    … on the fundamental nature of distributed fatigue damage in a random short fiber composite. The project consists of two different tasks: first, to develop a new experimental method, for conducting combined shear and axial fatigue damage in composites which are difficult to fabricate in axisymmetric …

    uiuc Repository record for An experimental investigation of homogeneous fatigue damage in a random short-fiber composite under combined tension-torsion loading (opens in a new tab)

  17. Improved Parameters of ANAND Model and Advanced FEA Technique for Low-Cycle Fatigue Life: Finite Element Analysis Models for Pb-free Solder and Pb Solder in Real Life Ball Gird Ally Package

    … to improve reliability prediction accuracy. Damage parameters are obtained from the FEA results and used to estimate solder balls’ thermal fatigue life. The Coffin-Manson equation is employed. The predicted thermal fatigue lives are discussed in detail. Due to marketing and legislative …

    portland-state Repository record for Improved Parameters of ANAND Model and Advanced FEA Technique for Low-Cycle Fatigue Life: Finite Element Analysis Models for Pb-free Solder and Pb Solder in Real Life Ball Gird Ally Package (opens in a new tab)

  18. Low Temperature Irradiation of Iron, Zirconium and Copper by 10 to 16 MeV Protons

    <p>Scattering and radiation damage parameters are analytically evaluated for 14 MeV neutrons and 10-17 MeV protons on Fe, Ni, Cu, Zr, Nb and Au. Damage energies are computed for the interactions using both elastic and non-elastic data. The theoretical results show that proton encounters deposit a …

    mcmaster Repository record for Low Temperature Irradiation of Iron, Zirconium and Copper by 10 to 16 MeV Protons (opens in a new tab)

  19. VIBRATION BASED DAMAGE IDENTIFICATION OF TIME-VARYING DYNAMICAL SYSTEMS

    … and explores two new kinds of vibration-based damage identification methodologies suitable for dynamical systems with periodically time-varying coefficients; 1) a Floquet based method (Methodology I) and, 2) a Sideband Frequency Response Function (FRF) method (Methodology II). One important …

    utk-theses Repository record for VIBRATION BASED DAMAGE IDENTIFICATION OF TIME-VARYING DYNAMICAL SYSTEMS (opens in a new tab)

Page 1 of 3