Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 21 for “"dc-dc Power Conversion"”.
-
DC-DC power conversion with galvanic isolation
… warships, there will be many changes to the power distribution schemes found aboard ships today. It will be necessary to maintain reliability while supplying the various components onboard with the proper voltage levels. Since transformers cannot be used to alter voltage levels while …
-
Practical Implementation of Boundary Control for Dc-Dc Power Conversion
… technique that uses the state trajectories of a dc-dc converter to formulate a control law that defines the state of the active switch in the converter. Unlike conventional methods, boundary controllers guarantee large signal stability. In this dissertation, a deep analysis of boundary control …
-
High-Efficiency and High-Power Density DC-DC Power Conversion Using Wide Bandgap Devices for Modular Photovoltaic Applications
With the development of solar energy, power conversion systems responsible for energy delivering from photovoltaic (PV) modules to ac or dc grid attract wide attentions and have significantly increased installations worldwide. Modular power conversion system has the highest efficiency of maximum …
-
Application of Integrated Magnetics and Discontinuous Conduction Mode to Multi-port DC-DC Power Conversion for integrating PV panels with storage
… in the incorporation of renewables in the power grid. Choice of topology is of paramount importance to improve the power conditioning. To this eect, the Cuk topology can be a suitable candidate : low Electromagnetic Interference (EMI), low component count, simplied Maximum Power Point …
-
Introduction of a current waveform, waveshaping technique to limit conduction loss in high-frequency dc-dc converters suitable for space power
Space power supply manufacturers have tried to increase power density and construct smaller, highly efficient power supplies by increasing switching frequency. Incorporation of a power MOSFET as a switching element alleviates switching loss. However, values of R sub DS(on) (drain-to-source …
-
Fabrication of nano-laminated soft magnetic metallic alloys through multilayer electrodeposition: application to high-frequency and high-flux power conversion
… magnetic cores for high frequency and high power conversion, the following key tasks have been accomplished: 1) electrodeposition of metallic alloy materials such as NiFe, CoNiFe, and anisotropic CoNiFe; 2) development of new fabrication technologies to realize nanolaminated cores based on …
-
Power loss estimation in LLC MOSFETs : a time interval analysis
… converters have become a mainstream topology in DC/DC power conversion applications such as electric vehicle charging, renewable energy generation and low power energy conversion. This converter presents advantages such as the soft-switching of active devices, which reduces power losses in the …
-
Class-E Current Source Power Conversion
Current source is used in auxiliary power supplies, battery chargers, and LED drivers. The battery chargers are required to provide constant current within a wide output voltage range, similar to LED drivers. The load-independent (LI) Class-E inverter is a promising topology for such applications …
-
High-frequency multi-resonant power conversion techniques
The multi-resonant technique, a novel concept in dc/dc power conversion, is proposed. The essence of the multi-resonant power conversion is the effective utilization of the major parasitic reactive components of the power stage, including the leakage inductance of the power transformer, output …
-
An Integrated Charge and Drive System for Electric Vehicles
… on a large-scale due to the need for high power charging hardware comprising of multiple power electronic stages dedicated to delivering controlled power to the EV battery. This thesis proposes an integrated charge and drive system for EVs. The concept is to utilize the on-vehicle …
-
Experimental investigation of semiconductor losses in cryogenic DC-DC converters
… benefits in terms of the performance of the power electronics or may enable other system benefits such as higher voltage lower current feedthroughs which reduce heat leakage into the cryostat. This Thesis studies the performance of several DC-DC power conversion techniques at temperatures …
-
Topology Investigation and System Optimization of Resonant Converters
… the past several years, energy efficiency and power density have become the top concerns for power conversion. Rising energy intensity leads to a higher cost of delivering power. Meanwhile, the demand for compact power supplies grows significantly. It requires power supplies with high …
-
HIGH-FREQUENCY POWER AMPLIFIERS FOR ION-BEAM ACCELERATORS
… accelerator needs to be driven by high-frequency power amplifiers that generate high voltages. This thesis provides steady-state modeling, circuit architectures, design methodologies and hardware implementation of an evolution of high-frequency high-efficiency compact switch-mode power amplifiers …
-
Reliability Analysis and Advancements in Fault Tolerant Control of Three-Phase Dual Active Bridge Converters
… (3p-DAB) converters are both widely employed in DC-DC power conversion applications. Compared to the 1p-DAB converter, the 3p-DAB converter’s inherently higher number of switches increases the risk of switch failures and associated gate driver failures. Nevertheless, this increased number of …
-
Analysis And Design Optimization Of Resonant Dc-dc Converters
The development in power conversion technology is in constant demand of high power efficiency and high power density. The DC-DC power conversion is an indispensable stage for numerous power supplies and energy related applications. Particularly, in PV micro-inverters and front-end converter of …
-
Modeling, Simulation, and Monitoring of a Photovoltaic Application Powering a Flywheel Energy Storage System
… converter is proposed to regulate the power output of the PV system to the FESS while maintaining the harnessed solar energy. A typical bidirectional converter has a fixed duty cycle that is determined based on a constant input voltage source; which is not the case with the voltage of a …
-
Full Bridge LLC Converter Secondary Architecture Study for Photovoltaic Application
… panels is a popular solution. Thus, targeted Power Conditioning Systems (PCSs) are drawing increased attention in research. Microconverter is one of the PCS that can support versatile applications in various power line architectures. This work focuses on the comparison of circuit secondary …
-
Analysis, modeling, and control of highly-efficient hybrid dc-dc conversion systems
This dissertation studies hybrid dc-dc power conversion systems based on multiple-input converters (MICs), or more generally, multiport converters. MICs allow for the integration of multiple distributed generation sources and loads. Thanks to the modular design, an MIC yields a scalable system with …
-
Speed, Power Efficiency, and Noise Improvements for Switched Capacitor Voltage Converters
Switched-capacitor (SC) DC-DC converters provide a viable solution for on-chip DC-DC conversion as all the components required are available in most processes. However, power efficiency, power density characteristics of SC converters are adversely affected by the integration, and characteristics …
-
Photovoltaic Source Simulators for Solar Power Conditioning Systems: Design Optimization, Modeling, and Control
… for the dynamic performance evaluation of solar power conditioning systems and their maximum power point tracking algorithms. A well-designed PV source simulator should accurately emulate the static and the dynamic characteristic of actual PV generator. Four major design features should be …
Page 1 of 2