Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 672 for “"debonding"”.

  1. Debonding Phenomenon of the Sioux Quartzite

    … cement, a phenomenon known as “stripping” or “debonding”. However, if the surface electric charges of the aggregate could be altered, then theoretically it should reduce or eliminate the stripping of asphalt cement mixes containing quartzite. With this idea in mind, this research goes into …

    sdstate Repository record for Debonding Phenomenon of the Sioux Quartzite (opens in a new tab)

  2. Interfacial debonding from a sandwiched elastomer layer

    … products. A common requirement is that the debonding of the elastomeric layer from the adherends be controlled to avoid undesirable failure modes. This level of control may necessitate understanding the collective role of the interfacial adhesion, material properties, part geometries, and …

    vt Repository record for Interfacial debonding from a sandwiched elastomer layer (opens in a new tab)

  3. Intermediate crack debonding of plated reinforced concrete beams

    … adhesively bonded plates are prone to premature debonding prior to reaching their designed capacities, which restricts the use of existing design rules and guidelines for retrofitting RC beams using this relatively new form of structure. There are various forms of debonding including : plate end …

    adelaide Repository record for Intermediate crack debonding of plated reinforced concrete beams (opens in a new tab)

  4. Fracture analysis of debonding mechanism for FRP plates

    … flaws in the concrete-FRP interface govern plate debonding, and are not amenable to finite element analysis because the models require far more detail than will ever be available for the interface. This thesis describes a global-energy-balance based fracture-mechanics model for the debonding …

    soton Download PDF for Fracture analysis of debonding mechanism for FRP plates (opens in a new tab)

  5. The Significance of Peel Stresses in Cyclic Debonding

    … modes in adhesively bonded joints is cyclic debonding -- progressive separation of the adherends by cyclic failure of the adhesive bond. In this study cyclic debonding in an adhesively bonded crack-lap shear specimen has been investigated by means of a linear elastic finite-element analysis …

    odu Repository record for The Significance of Peel Stresses in Cyclic Debonding (opens in a new tab)

  6. Debonding mechanisms of fibre reinforced polymer strengthened steel members.

    … thesis contributes in term of quantifying the debonding mechanism of FRP strengthened steel members. First, a procedure in the derivation of the bond-slip (τ-σ) relationship is presented by combining the results of the experimental work with a numerical method developed specifically for this …

    adelaide Repository record for Debonding mechanisms of fibre reinforced polymer strengthened steel members. (opens in a new tab)

  7. Skin stiffener debonding of top-hat stiffened composite structures

    … for engineering applications. During service debonding between the stiffener and the plate is a common failure mechanism. Therefore, an extensive understanding of the residual strength is required to rapidly and efficiently determine precautions to be taken to ensure the safety of the …

    soton Download PDF for Skin stiffener debonding of top-hat stiffened composite structures (opens in a new tab)

  8. STRUCTURAL RETROFITTING OF CONCRETE BEAMS USING FRP - Debonding Issues

    A 3D nonlinear finite element analysis modelling framework was developed for simulating the behaviour of beams retrofitted with fibre reinforced polymer (FRP). The ABAQUS program was used for this purpose. Concrete was modelled using a plastic damage model. Steel bars were modelled as an elastic …

    lund Repository record for STRUCTURAL RETROFITTING OF CONCRETE BEAMS USING FRP - Debonding Issues (opens in a new tab) Download PDF for STRUCTURAL RETROFITTING OF CONCRETE BEAMS USING FRP - Debonding Issues (opens in a new tab)

  9. Dynamic Fiber Debonding and Push-Out in Model Composites

    As an outcome of the numerical analysis, two major modifications were made to the experimental set-up: (a) stress information near the composite specimen was collected by a combination of quartz crystal transducer-strain gage measurement; (b) the crack initiation and propagation was explored by a …

    uiuc Repository record for Dynamic Fiber Debonding and Push-Out in Model Composites (opens in a new tab)

  10. A Comparison of Three Debonding Techniques Employing Two Different Cements

    … of this investigation was to evaluate the three debonding techniques (shear-peal, tension, torsion) using stainless steel brackets and two different bonding agents (traditional resin cement vs. resin reinforced glass ionomer). The hypotheses of this investigation were (1) the relative shear-peal, …

    iupui Repository record for A Comparison of Three Debonding Techniques Employing Two Different Cements (opens in a new tab)

  11. Clinical Debonding Simulation Study of One Metal and Two Ceramic Brackets

    … of this study is to compare two mechanical debonding methods on ceramic brackets (TP MXi and 3M Clarity) and a metal bracket (GAC OmniArch) with four different bonding materials (light-cured, one-step chemical-cured, two-step chemical-cured, and Fuji GIC) in clinical simulation, where the …

    loma-linda Repository record for Clinical Debonding Simulation Study of One Metal and Two Ceramic Brackets (opens in a new tab)

  12. Influence of Strand Debonding on the Shear Strength of Prestressed Concrete

    Strand debonding is a common method used to reduce flexural stresses caused by prestress transfer in the end regions of pretensioned concrete beams. Debonding is especially useful when section geometries prohibit draping such as U-beams. Based on concerns regarding shear strength, the AASHTO bridge …

    purdue-thes Repository record for Influence of Strand Debonding on the Shear Strength of Prestressed Concrete (opens in a new tab)

  13. Comparison of Enamel Surface Characteristics Following Debonding Using Scanning Laser Fluorescence

    … characteristics. This study compared three debonding protocols using scanning laser fluorometry to evaluate the enamel surface prior to and subsequent to bracket removal. The Null Hypothesis to be tested was that there is no difference between post-debond enamel surfaces for the three …

    marquette Repository record for Comparison of Enamel Surface Characteristics Following Debonding Using Scanning Laser Fluorescence (opens in a new tab)

  14. Comparing Orthodontic Debonding Aerosol Production with Various High-Volume Evacuation Systems

    … the PM2.5 aerosol production from orthodontic debonding with a high-speed, air-driven handpiece without water coolant and assess the effectiveness of traditional four-handed high-volume evacuation (HVE) and two commercially available hands-free high-volume evacuation (HFHVE) systems. Methods: …

    marquette Repository record for Comparing Orthodontic Debonding Aerosol Production with Various High-Volume Evacuation Systems (opens in a new tab)

Page 1 of 34