Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 65 for “"defect characterization"”.

  1. Defect characterization in 4% cadmium zinc telluride semiconductors

    This thesis presents a characterization study of Cadmium Zinc Telluride with a 4% Zinc molar concentration using five different techniques. Three of the characterization methods – X-ray diffraction (XRD), transmission electron microscopy (TEM) and wet chemical etching – were used to study the …

    uvic Repository record for Defect characterization in 4% cadmium zinc telluride semiconductors (opens in a new tab)

  2. Defect characterization in heterogeneous civil materials using ultrasound

    … method. However, the detection of smaller sized defects or remote defects that are located away from the testing location still pose problems. In addition, the large size and potential limited access conditions of civil structures raise additional challenges. To overcome the limitations of …

    gatech Repository record for Defect characterization in heterogeneous civil materials using ultrasound (opens in a new tab)

  3. Reliability Assessment and Defect Characterization of Piezoelectric Thin Films

    … thin films requires knowledge about point defects inside the materials. In this dissertation, the resistance degradation mechanism in sputtered lead zirconate titanate (PZT) and lead-free alternative sodium potassium niobate (KNN) thin films is studied in both voltage polarities, and its …

    qucosa-diss

  4. Device Engineering and Defect Characterization of Wide-Bandgap Semiconductor Detectors

    This work investigates the device engineering and defect characterization of next-generation wide-bandgap semiconductor radiation detectors, specifically focusing on cadmium zinc telluride selenide (CdZnTeSe or CZTS) single crystal, 4H-silicon carbide (4H-SiC) epitaxial layer, and …

    south-carolina Repository record for Device Engineering and Defect Characterization of Wide-Bandgap Semiconductor Detectors (opens in a new tab)

  5. Defect characterization in concrete elements using vibration analysis and imaging

    … is used to identify and characterize internal defects in concrete structures. However large testing volumes associated with the infrastructure demand many tests, which can be labor-intensive and time-consuming; contactless, air-coupled IE tests offer a solution to this limitation. In this …

    uiuc Repository record for Defect characterization in concrete elements using vibration analysis and imaging (opens in a new tab)

  6. Defect characterization of antimonide-based type-II superlattices for infrared detection

    … of InAs/InAsSb as well. This thesis explores the characterization of carrier transport properties in T2SL devices through a variety of techniques, though primarily with the application of electron beam induced current (EBIC) measurements. For these EBIC measurements, using first-principle analysis …

    uiuc Repository record for Defect characterization of antimonide-based type-II superlattices for infrared detection (opens in a new tab)

  7. Defect characterization, advanced etching techniques, and large field-of-view imaging for metalenses

    … a thorough study on the design, fabrication, and characterization of high-performance metalenses using metasurface technology. It underscores the interactions among fabrication imperfections, advanced nanofabrication techniques, and imaging performance across a large field of view (FOV). Defects …

    waterloo Repository record for Defect characterization, advanced etching techniques, and large field-of-view imaging for metalenses (opens in a new tab)

  8. Defect Characterization in a Steel Plate Using AC Magnetic Flux Leakage (AC MFL)

    … mathematical technique to predict the MFL from defects in ferromagnetic materials in DC MFL system. In this thesis, coarse approximations made by researchers using magnetic dipole model are evaluated. A finite element model of an AC MFL system is developed for two common defect shapes located on …

    toronto-retro Repository record for Defect Characterization in a Steel Plate Using AC Magnetic Flux Leakage (AC MFL) (opens in a new tab)

  9. Microstructure-property development and defect characterization of Al-X friction welds for automotive applications

    … as well as big amounts of literatures, various defects can have a significantly influence on the quality of the FW joints. However, the formation mechanism of the defects in the welds as well as the effect regulation on the properties of the welds have not been systematically studied. Therefore, …

    birmingham Download PDF for Microstructure-property development and defect characterization of Al-X friction welds for automotive applications (opens in a new tab)

  10. Coating Thickness Measurements and Defect Characterization in Non-Metallic Composite Materials by Using Thermography

    … other NDT methods do, thermography determines a defective area based on the signal difference between suspected defective areas and defective-free areas. Two unavoidable effects are decreasing the credibility of thermography detection: one is uneven heating, and the other is lateral diffusion of …

    tamu Repository record for Coating Thickness Measurements and Defect Characterization in Non-Metallic Composite Materials by Using Thermography (opens in a new tab)

  11. Edge based finite element simulation of eddy current phenomenon and its application to defect characterization

    … inversion scheme is proposed to characterize defect profiles from eddy current probe signals. The method relies on the edge element based forward model to predict probe responses and a minimization algorithm to minimize an objective function representing the squared error between the modal …

    iastate Repository record for Edge based finite element simulation of eddy current phenomenon and its application to defect characterization (opens in a new tab)

  12. Transmission electron microscopy (TEM) defect characterization in bulk aluminum nitride (AIN) crystals produced by sublimation method

    The types and densities of defects in AlN crystals were investigated. High concentration of oxygen and hydrogen from the source AlN powder were a major source of point defects. Defect free AlN oxidized at 800°C produced amorphous oxide layers and high density of dislocations, stacking faults and …

    ttu Repository record for Transmission electron microscopy (TEM) defect characterization in bulk aluminum nitride (AIN) crystals produced by sublimation method (opens in a new tab)

  13. An invariance transformation algorithm for defect characterization of ultrasonic signals for the nondestructive evaluation of concrete

    … have created a significant challenge for defect characterization. This thesis proposes, develops, and validates a defect characterization algorithm that compensates for operational variables and maps the test signal to a visual defect profile. This algorithm takes a two-step approach: The …

    rowan Repository record for An invariance transformation algorithm for defect characterization of ultrasonic signals for the nondestructive evaluation of concrete (opens in a new tab)

  14. Defect Characterization of 4H-SIC by Deep Level Transient Spectroscopy (DLTS) and Influence of Defects on Device Performance

    … extended and microscopic crystallographic defects during the growth process. Recently, SiC based high-resolution semiconductor detectors for ionizing radiation have attracted world-wide attention due to the availability of high resistive, highly crystalline epitaxial layers with very low …

    south-carolina Repository record for Defect Characterization of 4H-SIC by Deep Level Transient Spectroscopy (DLTS) and Influence of Defects on Device Performance (opens in a new tab)

  15. A Study in the Advanced Manufacturing of Full Solids Oxide Fuel Cells (SOFCs) via Aerosol Deposition (AD) Methods with Macro- and Microstructural Defect Characterization

    … evaluated in effort to minimize microstructural defects in the deposited layers and macrostructural defects in the anode substrate. The addition of an additional NiO/YSZ layer, deposited between the anode support and electrolyte layer was found to be necessary due to defects found when sintering …

    wvu Repository record for A Study in the Advanced Manufacturing of Full Solids Oxide Fuel Cells (SOFCs) via Aerosol Deposition (AD) Methods with Macro- and Microstructural Defect Characterization (opens in a new tab)

  16. THE IMPURITY EFFECTS AND THE NONSTOICHIOMETRIC DEFECT CHARACTERIZATION OF CERIUM OXIDE(2-X) AND CERIUM(.9)ZIRCONIUM(.1)OXIDE(2-X) IN THE NEAR-STOICHIOMETRIC COMPOSITION RANGE

    … found that the results were consistent with a defect model involving doubly ionized oxygen vacancies arising from both nonstoichiometry and lower valent cation impurities (e.g., Ca('+2)). A method of analysis was also developed to determine the equivalent amount of M('+2) impurities. It was …

    marquette Repository record for THE IMPURITY EFFECTS AND THE NONSTOICHIOMETRIC DEFECT CHARACTERIZATION OF CERIUM OXIDE(2-X) AND CERIUM(.9)ZIRCONIUM(.1)OXIDE(2-X) IN THE NEAR-STOICHIOMETRIC COMPOSITION RANGE (opens in a new tab)

  17. Neural networks and non-destructive test/evaluation methods [manuscript]

    … manner. A major part of NDTE techniques is defect characterization, which is a typical pattern classification problem. The current state of the art for solving this problem is the application of a human expert's knowledge and experience for interpreting NDTE data. Artificial neural networks …

    nps Repository record for Neural networks and non-destructive test/evaluation methods [manuscript] (opens in a new tab)

Page 1 of 4