Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 74 for “"deformation temperature"”.

  1. Electrical resistivity measurements of deformed molybdenum crystals

    … 195°K, 273°K, 373°K and 473°K. The influence of deformation temperature and intermediate annealing treatments at 473°K and 422°K on the electrical resistivity was investigated. All resistivity measurements were made at 4.2°K. The results indicated that: (1) Point defects are created during …

    rice Repository record for Electrical resistivity measurements of deformed molybdenum crystals (opens in a new tab)

  2. Some aspects of stability in thermoelasticity

    … context of three theories of thermoelasticity: temperature-rate-dependent thermoelasticity TRDTE which was formulated by Green and Lindsay [21]; temperature-rate-dependent thermoelasticity with generalized thermoelasticity, which we label TRDTE + GTE (1), formulated by Chandrasekharaiah and …

    east-anglia Download PDF for Some aspects of stability in thermoelasticity (opens in a new tab)

  3. The effects of processing conditions on static abnormal grain growth in Al-Mg alloy AA5182

    … sheet by varying four processing parameters: deformation temperature, strain rate, annealing temperature, and annealing time. SAGG is a secondary recrystallization process related to geometric dynamic recrystallization (GDRX) and requires both deformation at elevated temperature and subsequent …

    texas Repository record for The effects of processing conditions on static abnormal grain growth in Al-Mg alloy AA5182 (opens in a new tab)

  4. Investigation of the work hardening characteristics and fracture toughness of low alloy steels

    … have been investigated in detail over a range of temperatures between 20°C and -196°C. The true stress - true strain characteristics have been analysed using several different approaches. Strain hardening exponent and transition strain valves were determined from Hollomon's equation ?T = K ?Tn …

    strathclyde Repository record for Investigation of the work hardening characteristics and fracture toughness of low alloy steels (opens in a new tab)

  5. Observation of dislocations in molybdenum

    … structure was examined at each strain and temperature increment, and measurements of the dislocation density and the density of jogs on primary screw dislocations were made. The results indicated that: (1) The dislocation density of molybdenum single crystals deformed in shear increases …

    rice Repository record for Observation of dislocations in molybdenum (opens in a new tab)

  6. Mathematical modelling of the microstructural evolution during the hot rolling of AA5083 aluminum alloys

    … model to predict the through-thickness temperature, strain and strain rate distribution after a single hot rolling stand was developed and applied to two commercially significant alloys, AA5083 and AA5056 aluminum alloys. For the AA5083 aluminum alloy application a microstructure …

    ubc Repository record for Mathematical modelling of the microstructural evolution during the hot rolling of AA5083 aluminum alloys (opens in a new tab) Download PDF for Mathematical modelling of the microstructural evolution during the hot rolling of AA5083 aluminum alloys (opens in a new tab)

  7. Grain refinement in dual phase steels

    … fine grained dual phase (DP) steels was studied. Deformation induced ferrite transformation (DIFT) was applied in laboratory tests employing a Gleeble 3500 thermo-mechanical simulator to produce fine grained dual phase steels in two chemistries: a conventional DP 600 chemistry with 0.06 wt% C-1.9 …

    ubc Repository record for Grain refinement in dual phase steels (opens in a new tab) Download PDF for Grain refinement in dual phase steels (opens in a new tab)

  8. Efficient Thermo-Mechanical Model for Solidification Processes and Its Applications in Steel Continuous Casting

    … is solved for the simultaneous evolution of deformation, temperature, and stress. Finally, a large scale 3D simulation of a thin slab caster with a funnel, first of that kind ever conducted, is performed to correctly reproduce the 3D mechanical state in casting process with extremely complex …

    uiuc Repository record for Efficient Thermo-Mechanical Model for Solidification Processes and Its Applications in Steel Continuous Casting (opens in a new tab)

  9. Study of precipitation and recrystallization in A1 Alloy 2519 by backscattered electron imaging methods

    This study examines the effects of pre-strain deformation temperature, overaging temperature, and other variations in thermomechanical processing (TMP) on the mean size and size distribution of q-phase precipitate particles in Al alloy 2519. Examination was performed using the scanning electron …

    nps Repository record for Study of precipitation and recrystallization in A1 Alloy 2519 by backscattered electron imaging methods (opens in a new tab)

  10. Fe-Zn phase evolution and cracking behavior in Zn-coated press-hardened steel

    … and interaction with the substrate sheet during deformation, is desired. The objective of this work was to relate the microstructural evolution in the Fe Zn coatings heat treated under single or two step thermal processing to the cracking response in specimens deformed in uniaxial tension at …

    colo-mines Repository record for Fe-Zn phase evolution and cracking behavior in Zn-coated press-hardened steel (opens in a new tab)

  11. Vorticity of Flow, Deformation Temperatures, and Strain Symmetry of the Moine Thrust Zone, NW Scotland: Constraining the Kinematic and Thermal Evolution of a Collisional Orogenic System

    Examination of deformation temperature, flow vorticity, and strain symmetry in the Loch Eriboll, Loch More, and Assynt regions of the Moine thrust zone (MTZ) in northwest Scotland allows quantitative kinematic and thermal characterization of a crustal-scale shear zone at the base of the Scandian …

    vt Repository record for Vorticity of Flow, Deformation Temperatures, and Strain Symmetry of the Moine Thrust Zone, NW Scotland: Constraining the Kinematic and Thermal Evolution of a Collisional Orogenic System (opens in a new tab)

  12. Analysis of calcite-filled faults in carbonate strata, balcones trend near Waco, Texas.

    … shear stress slightly more than 5-15 MPa, and deformation temperature of <170°C. The microspar fabric includes thin veinlets of secondary calcite and host lithons of cemented chalk wallrock whose orientation relative to the domain boundaries can be used as a shear-sense indicator.

    baylor Repository record for Analysis of calcite-filled faults in carbonate strata, balcones trend near Waco, Texas. (opens in a new tab)

  13. Experimental Investigation of the Fatigue Behaviour of Natural Rubber Under Different Loading and Environment Conditions

    … a protocol of rounded samples to understand how deformation, temperature, frequency, and aging impact natural rubber fatigue behavior; (2) determine the relationship between the number of fatigue life cycles and the applied load for various loading and environment conditions; (3) evaluate the …

    york Repository record for Experimental Investigation of the Fatigue Behaviour of Natural Rubber Under Different Loading and Environment Conditions (opens in a new tab)

  14. Revealing deformation mechanisms of advanced face-centred cubic alloys at cryogenic environment via in situ neutron diffraction

    … strong and ductile structural materials for low-temperature applications ranging from familiar natural gas storage/transmission to advance superconductivity realization. In this thesis, in situ neutron diffraction and tensile testing were performed at the low-temperature range (e.g., from 373 to …

    birmingham Download PDF for Revealing deformation mechanisms of advanced face-centred cubic alloys at cryogenic environment via in situ neutron diffraction (opens in a new tab)

  15. Deformation behaviour and processing of a powder metallurgy metastable beta titanium alloy

    … outstanding corrosion resistance, wide service temperature range and great hardenability. However, the lack of enough understanding of the nature of their hot workability and deformation behaviour and insufficient data for optimising the respective hot processing conditions makes it difficult …

    waikato-masters Repository record for Deformation behaviour and processing of a powder metallurgy metastable beta titanium alloy (opens in a new tab) Download file for Deformation behaviour and processing of a powder metallurgy metastable beta titanium alloy (opens in a new tab)

  16. High temperature creep deformation in solid solution alloys of lead

    Some high temperature creep properties of two alloy systems, Pb-Bi and Pb-In, have been studied. Three compositions in each system were used with all alloys being solid solutions at the deformation temperature. Solid solutions are usually divided into two groups, Class I and Class II, because of …

    ubc Repository record for High temperature creep deformation in solid solution alloys of lead (opens in a new tab) Download PDF for High temperature creep deformation in solid solution alloys of lead (opens in a new tab)

  17. Effect of Manganese (Mn) Content and Homogenization Treatment on Hot Deformation of AA3xxx Aluminum Alloys

    … and homogenization heat treatment on the hot deformation behavior of AA3XXX aluminum alloy was investigated. Three Mn contents of 0.05, 0.29 and 1.04 wt.% were considered. These alloys were subjected to a single-step heat treatment (H1), two two-steps heat treatments (H2 and H3) cycles. …

    waterloo Repository record for Effect of Manganese (Mn) Content and Homogenization Treatment on Hot Deformation of AA3xxx Aluminum Alloys (opens in a new tab)

  18. Microstructure and texture evolution during hot deformation of AZ80 magnesium alloy

    The research investigates the hot deformation behaviour of the AZ80 alloy, with special emphasis on obtaining the flow stress data for a variety of deformation conditions (in range of 300 – 450 °C, and 0.001/s to 1/s) based on uniaxial compression tests, and studying how the microstructure and …

    waterloo Repository record for Microstructure and texture evolution during hot deformation of AZ80 magnesium alloy (opens in a new tab)

Page 1 of 4