Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 37 for “"defrost"”.
-
Cost Minimization for Hot Gas Defrost System
… the efficiency of refrigeration systems. Many defrost methods have been used and hot gas defrost is the most common for industrial refrigeration applications. However, it is not a simple task to run an efficient hot gas defrost system. The duration and frequency of the defrost cycle should be …
-
Effect of Surface Wettability on the Defrost Process
… on the effect of surface wettability on the defrost process. Some of the literature show experimental results on defrost time for different surfaces, but the results could be different based on individual experimental conditions. In this study, the influences of surface wettability on the …
-
Windshield Defrost and Deice Using Carbon Nanotube Composite
… conductive film heater, particularly for defrosting or deicing windshields, and can also be applied to other surface types that need instant heating. This research can replace conventional heaters, Indium Tin Oxide (ITO), which are fabricated either by dielectrophoresis or piece-wise …
-
Velocity based defrost of evaporator coil of heat pumps
… coils of residential heat pumps and subsequent defrost cycles to remove the frost in an energy efficient manner remains an active area of research and development in the HVAC industry. Inverting the cycle to reject heat from the outdoor coils is the most common method to run defrost cycles of …
-
Dynamic modeling and simulation of frost and defrost conditions for refrigeration systems
… capacity achievable, resulting in the need for defrost cycles. Much work has been done to date to establish strategies aimed at improving defrost decision making and allow for improved operational efficiency. Nonetheless, some of the most common methods still permit defrost to run when …
-
Modeling and Numerical Investigation of Hot Gas Defrost on a Finned Tube Evaporator Using Computational Fluid Dynamics
Defrosting in the refrigeration industry is used to remove the frost layer accumulated on the evaporators after a period of running time. It is one way to improve the energy efficiency of refrigeration systems. There are many studies about the defrosting process but none of them use computational …
-
Moisture transport processes and control of relative humidity in refrigerated facilities : a thesis presented in partial fulfilment of the requirements for the degree of Master of Engineering at Massey University, Palmerston North, New Zealand
… and structures in the facilities. • Evaporator defrost assuming that a fraction of the defrost heat melts frost and the rest heats the evaporator and refrigerant mass. • Hot gas bypass with liquid refrigerant desuperheating to prevent the compressor operating into vacuum. • Moisture sorption by …
-
Heat and mass transfer during the melting process of a porous frost layer on a vertical surface
… performance the layer must be removed through a defrost cycle. The most common defrost cycle uses heat applied at the heat exchanger surfaces to melt the frost. Current methods of defrosting are inherently inefficient, with the majority of the heat being lost to the surrounding environment. Most …
-
Experimental study of air-to-air heat/energy exchangers for use in Arctic housing
… Phase 1 with one HEE without recirculation defrost, Phase 2 with one HEE with recirculation defrost, and Phase 3 with two HEEs in parallel with alternating recir-culation defrost. Correlation−based models were developed that predict the change in heat transfer effectiveness in terms of the …
-
Modeling the effect of dual-core energy recovery ventilator (ERV) unit on the energy use of houses in northern Canada compared with the single-core ERV unit
The conventional preheating defrost used in the single-core energy recovery ventilator (ERV) is not optimal for housing in northern Canada due to its significant energy consumptions. Therefore, the recirculation defrost and dual-core operation have been the focus for addressing the frosting issues …
-
INVESTIGATION OF PERFORMANCE DEGRADATION OF EVAPORATOR FOR LOW TEMPERATURE REFRIGERATION APPLICATIONS
… rate and the power consumption of the electric defrost heater. The system is designed to work as a commercial refrigeration system for low temperature applications including freezing and defrost cycles. A manual and automatic defrost control has been designed and tested. The calculated values …
-
Energy consumption of refrigerators as affected by selected consumer practices
… a heat source were each performed on a manual-defrost refrigerator, a cycle-defrost refrigerator-freezer, and a no-frost refrigerator-freezer. A test involving the use of an energy-saver switch was performed on a no-frost refrigerator-freezer, and two tests related to the effect of frost …
-
Dynamic Simulation and Control Design Tools for Heat Pump Systems
… dynamic characteristics in cooling, heating, and defrosting modes. A graphical user interface is developed for the dynamic models to facilitate parameter inputs and to generate steady-state operating conditions. The second part introduces energy optimal control and intelligent defrost control. …
-
Cascade and Secondary Coolant Supermarket Refrigeration Systems: Modelling and New Frost Correlations
… and global warming potential. Additionally, defrosting of air-coils is one of the most energy consuming processes in supermarket refrigeration systems due to susceptibility of the air-coils to moisture. Hence, the frost forming on air-coils as a result of moisture transfer should be removed …
-
The influence of ambient temperature and relative humidity on the heating mode performance of a high-efficiency air-to-air heat pump
… steady-state, dehumidification, and frosting defrosting conditions with major emphasis placed on dynamic frosting operation of the system. The study encompassed an evaluation of system and component performance for ambient temperature levels of 8.3°C, 4.4°C, 1.7°C, -].1°C, and …
-
Energy efficiency enhancements to a low energy high performance building
… pump, the energy recovery ventilator's defrost heater, and general office equipment (computers, refrigerators, coffee pot, etc.) during periods when the building is unoccupied. Before the improvements, the three items contributed to 38% of the building's annual energy use. The table …
-
Microwave usage patterns among college students at Virginia Polytechnic Institute and State University
… a minute timer, variable power, automatic defrost, and touch controls. Students who would purchase a microwave in the future desired an average of 7.2 features, minute timer, variable power, automatic defrost, touch controls, clock, and delay start. The tasks that are currently being …
-
Investigation of Refrigerant Distribution in a Household Refrigerator with a Focus on the Role of the Accumulator
… at low ambient temperatures during cycling and defrost periods.
-
Prediction and control of frost formation in an air to air heat exchanger
… of heat transfer degradation permitted before a defrost is initiated, the maximum cold air stream mass flow rate through the heat exchanger permitted just following a defrost; and the rate at which the supply air flow rate is changed. The proposed control strategy directly measures the …
Page 1 of 2