Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 44 for “"degradation testing"”.

  1. Maintenance oriented optimal design of accelerated degradation testing

    … dissertation, the problem of using accelerated degradation testing data for reliability estimation is studied and demonstrated. Simulation and analytical approaches have been investigated. By simulation which generates a large number of degradation paths, the reliability estimate of the product …

    wichita-thes Repository record for Maintenance oriented optimal design of accelerated degradation testing (opens in a new tab)

  2. Accelerated thermal degradation testing of GAN HEMTs under high-temperature stress

    Submission original under an indefinite embargo labeled 'Open Access'. The submission was exported from vireo on 2026-02-19 without embargo terms

    uiuc Repository record for Accelerated thermal degradation testing of GAN HEMTs under high-temperature stress (opens in a new tab)

  3. Multi-signal Accelerated Degradation Testing of Rolling Ball Bearings Through Radial Overload

    … needed. Using data collected during accelerated degradation tests has the advantages of being easily controlled and of providing ample data over relatively a short test period. A testbed has been designed and constructed that incites bearing failure through the application of a radial load. …

    ut-knoxville Repository record for Multi-signal Accelerated Degradation Testing of Rolling Ball Bearings Through Radial Overload (opens in a new tab)

  4. Lifetime prediction and confidence bounds in accelerated degradation testing for lognormal response distributions with an Arrhenius rate relationship

    … component of quality assurance. Traditional life testing methods are infeasible for products that have been designed to have a very long lifetime because they require a lengthy testing period. An alternative method is accelerated degradation testing, where a response variable determining the …

    must-thes Repository record for Lifetime prediction and confidence bounds in accelerated degradation testing for lognormal response distributions with an Arrhenius rate relationship (opens in a new tab)

  5. IN VITRO STUDIES ON DEGRADATION OF BIO ALLOYS AND CYTOCOMPATIBILITY WITH BONE MARROW DERIVED STEM CELLS

    … Modified Eagle Medium (DMEM), we evaluate their degradation characteristics and biocompatibility. With the goal of identifying materials that safely dissolve in the body with minimal toxicity while promoting stem cell activity, we investigate zinc alloys containing various trace elements under …

    csusb Repository record for IN VITRO STUDIES ON DEGRADATION OF BIO ALLOYS AND CYTOCOMPATIBILITY WITH BONE MARROW DERIVED STEM CELLS (opens in a new tab)

  6. Contributions to planning and analysis of accelerated testing

    … in saving time and expense,Accelerated Life Testing (ALT) and/or Accelerated Degradation Testing (ADT) are becoming an integral part of many programs for improving productsa??quality and reliability.However,appropriate analysis of ALT/ADT data and planning of ALT/ADT experiments are still a …

    nus Repository record for Contributions to planning and analysis of accelerated testing (opens in a new tab) Download file for Contributions to planning and analysis of accelerated testing (opens in a new tab)

  7. MATERIAL AND ELECTROCHEMICAL PROPERTIES OF WROUGHT AND ADDITIVELY MANUFACTURED ALUMINUM ALLOYS- EFFECTS OF SURFACE PRETREATMENT AND SURFACE FINISHING

    … using electrochemical methods and accelerated degradation testing. A second aim of the research was to investigate the material properties and electrochemical behavior of aluminum alloy, AlSi10Mg, prepared by additive manufacturing using selective laser melting (SLM). Two studies of corrosion …

    msu Repository record for MATERIAL AND ELECTROCHEMICAL PROPERTIES OF WROUGHT AND ADDITIVELY MANUFACTURED ALUMINUM ALLOYS- EFFECTS OF SURFACE PRETREATMENT AND SURFACE FINISHING (opens in a new tab)

  8. Ageing of integrated-planar Solid Oxide Fuel Cells

    … such performance is still not attainable because degradation occurs at more than 1% per thousand hours under practical test conditions. In this thesis, the ageing of the Rolls Royce Fuel Cell Systems (RRFCS)Integrated Planar Solid Oxide Fuel Cell (IP-SOFC) was studied under different operating …

    birmingham Download PDF for Ageing of integrated-planar Solid Oxide Fuel Cells (opens in a new tab)

  9. Novel electrocatalyst supports for polymer electrolyte fuel cells

    … showed the best durability after accelerated degradation testing up to 20400 cycles. This result was attributed to the shielding effect of surfactant molecules on the surface of Pt clusters. The Pt/C NP-9 catalyst also showed the highest specific activity at 0.9 V (807.67 μA/cm2) and 0.95 V …

    birmingham Download PDF for Novel electrocatalyst supports for polymer electrolyte fuel cells (opens in a new tab)

  10. Application of Semi-Hydrophobic Layers to Decrease Bare Soil Evaporation

    … Penetration Time (WDPT) tested before and after degradation testing, and physical properties of the treated soil including hydraulic conductivity and porosity were also measured. Pre degradation WDPT tests showed that the polymerized soybean oil slightly hydrophobized the sands, and the treated …

    unlv Repository record for Application of Semi-Hydrophobic Layers to Decrease Bare Soil Evaporation (opens in a new tab) Download PDF for Application of Semi-Hydrophobic Layers to Decrease Bare Soil Evaporation (opens in a new tab)

  11. Study of 3D-Printed Polymers for Aerospace Structural Applications

    … subjected to structural loads and environmental degradation. A major advantage of additive manufacturing is the ability to produce parts with complex geometries that would be costly or infeasible with other manufacturing techniques. A major disadvantage of additive manufacturing is the large …

    washington Repository record for Study of 3D-Printed Polymers for Aerospace Structural Applications (opens in a new tab)

  12. A Comparison of the Effects of Chlorhexidine Hexametaphosphate and Silver Nanoparticle Antimicrobials on the Mechanical and Esthetic Properties of Elastomeric Chain

    … tensile strength, ultimate elongation, and force degradation of orthodontic elastomeric chains. Materials & Methods: A total of 180 gray colored reduced elastomeric chains were included in this in vitro study. The elastomeric chains were separated evenly into a control group (n = 60) and two …

    buffalo Repository record for A Comparison of the Effects of Chlorhexidine Hexametaphosphate and Silver Nanoparticle Antimicrobials on the Mechanical and Esthetic Properties of Elastomeric Chain (opens in a new tab)

  13. Applications of ft-infrared spectroscopy and ft-Raman spectroscopy as analytical tools

    … 3 and 4 deal with the study of the degradation of polysulfide sealants. The fact that vibrational spectroscopy is a standard method of analysing degradation products and processes is emphasised. Polysulfide sealants as used in the aerospace industry, degrade over their lifetime …

    soton Download PDF for Applications of ft-infrared spectroscopy and ft-Raman spectroscopy as analytical tools (opens in a new tab)

  14. DEGRADATION OF PROTECTIVE GLOVE MATERIALS EXPOSED TO COMMERCIAL PRODUCTS: A COMPARATIVE STUDY OF TENSILE STRENGTH AND GRAVIMETRIC ANALYSES

    … today.</p> <p>This study offers a solution by testing five durable polymer materials against 50 chemicals, using two rapid chemical degradation assessment techniques. The first technique involves gravimetric analysis of the weight change following constant immersion against the chemical …

    csusb Repository record for DEGRADATION OF PROTECTIVE GLOVE MATERIALS EXPOSED TO COMMERCIAL PRODUCTS: A COMPARATIVE STUDY OF TENSILE STRENGTH AND GRAVIMETRIC ANALYSES (opens in a new tab)

  15. Synthesis of Iron Zinc Oxide Doped Fe-N-C Catalyst for High Performance Proton Exchange Membrane Fuel Cells

    … However, Fe-N-C catalysts suffer from numerous degradation mechanisms that severely hinders its application in practical use. In this paper we introduce the usage of Iron Zinc Oxide (Fe-ZnO) nanoparticles as an iron source in the production of ZIF-8 precursor. By encapsulating Fe-ZnO in ZIF-8, …

    buffalo Repository record for Synthesis of Iron Zinc Oxide Doped Fe-N-C Catalyst for High Performance Proton Exchange Membrane Fuel Cells (opens in a new tab)

  16. Improving the light-induced degradation of hydrogenated amorphous silicon solar cells using fabrication at elevated temperatures and low pressure

    … (a-Si:H) solar cells that reduces light-induced degradation via the Staebler-Wronski effect is presented. By using elevated temperatures up to 450°C with chamber pressures down to 25mT, a-Si:H solar cells are fabricated with improved stability. This combination of fabrication conditions, combined …

    iastate Repository record for Improving the light-induced degradation of hydrogenated amorphous silicon solar cells using fabrication at elevated temperatures and low pressure (opens in a new tab)

  17. Some contributions to maintenance and accelerated degradation test under complex failure process

    … practical issues in maintenance and accelerated degradation testing (ADT), which are two important techniques implemented in the product/system's life cycle reliability engineering. First off, the statistical analysis of repairable systems provides useful tools to characterize and predict the …

    nus Repository record for Some contributions to maintenance and accelerated degradation test under complex failure process (opens in a new tab) Download file for Some contributions to maintenance and accelerated degradation test under complex failure process (opens in a new tab)

Page 1 of 3