Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 237 for “"degree of crystallinity"”.
-
The influence of degree of crystallinity on the thermal conductivity of nylon 66
The use of massive nylon as a material for bearing liners is limited by its low melting point ( 260 °C) and its low thermal conductivity (0.172 Btu per hour - square foot - °F per foot). This combination of defects results in the formation of hot spots at points of stress., and since the material …
-
Effect of heat treatment on tensile properties, dyeability and crystallinity of nylon and polyester filament yarns
… column technique, was used to calculate the degree of crystallinity as a structural parameter. Filament tensile strength and elongation at break were measured on a constant-rate-of-extension machine, and then toughness of the sample was obtained from the load elongation curve. The amount of …
-
Investigating Polymer Conformation in Poly (Ethylene Oxide) (PEO) Based Systems for Pharmaceutical Applications A Raman Spectroscopic Study of the Hydration Process
The purpose of this work is to investigate the relation of hydration and the degree of crystallinity for poly (ethylene oxide) (PEO) tablets using Raman spectroscopic methods and complementary thermal analysis for pharmaceutical interests. The influence of the tableting process is also investigated …
-
Influência de tratamentos térmicos no comportamento mecânico da blenda poli(metacrilato de metila) / poli(tereftalato de etileno) reciclado
Studies indicate that a variation in the degree of crystallinity of the components of a polymer blend influences the mechanical properties. This variation can be obtained by subjecting the blend to heat treatments that lead to changes in the spherulitic structure. The aim of this work is to analyze …
-
Drying mechanism of semicrystalline polymers
The mechanism of removal of solvents such as water and methanol from semicrystalline poly(vinyl alcohol) films was investigated. The kinetics of solvent removal was studied gravimetrically and the solvent volume fractions during drying were determined using a buoyancy technique. The influence of …
-
The effect of crystalline morphology on the glass transition and enthalpic relaxation in poly (ether-ether-ketone)
This work investigates the effect of crystalline morphology on the glass transition and ageing characteristics of semi-crystalline PEEK. It is shown that an increasing degree of crystallinity acts to raise the glass transition temperature of the polymer and reduce the overall degree of enthalpic …
-
Electrical and thermal properties of high aspect ratio carbon-based polymer nanocomposites
This project is a part of a collaboration of Borealis AB Stenungsund with Chalmers University of Technology. The objective of this project is to conduct an experimental study on the effect of different carbon based high aspect ratio fillers and different polymer architectures on the resulting …
-
Thermal anisotropy and conductivity studies of nylon 66
… nylon lends itself to many applications because of its outstanding toughness, abrasion-resistance, and chemical resistance. These properties make it a satisfactory bearing material, and in some applications it is superior to metallic bearings. However, the disadvantages of low melting point and …
-
Processing-structure-property relationship in fused filament fabrication of Nylon-12
<p>This thesis is devoted to the investigation of the structure-property-relationships in additive manufacturing (AM). General thermodynamic and kinetic aspects that are peculiar for this manufacturing mode are considered, and made specific and applied by selecting a particular flavour of AM (FFF) …
-
TOWARDS AN UNDERSTANDING OF THE DEGRADATION MECHANISMS OF UHMWPE-BASED SOFT BALLISTIC INSERTS
The objective of this work is to advance the field of lightweight and soft ultra-high molecular weight polyethylene (UHMWPE) inserts used in ballistic resistant-body armor, through the evaluation of chemical and physical degradation, and provide critical insight into the mechanisms involved. These …
-
Some Physico-Chemical Properties of Amorphous Mineral Colloids
… and a Japanese soil known to have high contents of these colloids. These five soils represent weathering conditions ranging from moderately to strongly weathered, with varying silica-alumina ratios. The physico-chemical properties of amorphous mineral colloids were studied by several methods: …
-
Use of ionic liquid for producing regenerated cellulose fibers
The objectives of the research are to establish the process of obtaining regenerated fibers and films from wood pulp and bagasse pulp with the ionic liquid 1-Butyl-3-methylimidazolium Chloride (BMIMCl) as a solvent; to study the impacts on tensile strength of different spinning parameters; to find …
-
Non-isothermal crystallization of high density polyethylene
… non-isothermal crystallization kinetics of two polyethylene resins were investigated by the modified light depolarizing microscopy (LDM) technique developed by Ding and Spruiell (1994). The cooling rates studied were in the range of 5-5,000°C/min. Small angle light scattering (SALS), …
-
Crystallization and enthalpic relaxation studies on a Copolymer of lactic acid
The effect of thermal behaviour and properties such as enthalpic relaxation, degree of crystallinity, development of crystallization, crystallization kinetics and melting behaviour of Co-poly (lactic acid) were studied using differential scanning calorimetry (DSC), FTIR spectroscopy and hot stage …
-
Development of bi- and multicomponent fibres for tissue engineering by electrospinning
This project investigated the possibility of tailoring the crystallinity of electrospun fibres (crystallinity studies), and the electrospinning of bi- and multicomponent scaffolds of PLLA. During the crystallinity studies, the effects of various electrospinning process parameters on the …
-
Effects of high pressure solidification on the tensile properties of polypropylene
… solidification should strongly influence the crystallinity, and hence mechanical properties, of those regular polymers which can crystallize when cooled from the melt. In this study, samples of isotactic polypropylene were solidified under pressures up to 40,000 psi. In addition to tensile …
-
Parameters governing the piezoelectric properties of PVDF
This thesis investigates the effects of thermal annealing, PLA incorporation, and electrospinning on the crystalline structure, β-phase content, and piezoelectric properties of PVDF-based materials. Thermal annealing treatments were performed at temperatures close to and further from the …
-
Evaluation of Different Additives in a Polyolefin System and Their Impact on the Polymer Properties
The effect of various liquid and solid additives on the physical properties of a heterophasic PP copolymer were studied. Two sample preparation methods, compression molding and tape extrusion were used to study the mechanical and thermal properties of the polymer. To investigate the material …
-
The fracture mechanics of lithium disilicate glass and glass-ceramics
The dependence of fracture strength upon the time of loading is commonly termed static fatigue or delayed failure. This has been attributed to the growth of subcritical flaws under stress. Hence the study of subcritical crack growth is important in predicting the life expectancy of a material when …
Page 1 of 12