Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 15 of 15 for “"demolding"”.
-
Developing defect-tolerant demolding process in nanoimprint lithography
Demolding, the process to separate stamp from molded resist, is most critical to the success of ultraviolet nanoimprint lithography (UV-NIL). In the present study we first investigated adhesion and demolding force in UV-NIL for different compositions of a model UV-curable resist containing a base …
-
Methods and Material Developed beyond Conventional Nanoimprint
… and the mold is a critical factor in the demolding process. In the third part of our study, polycarbonate residual layer has been applied as an anti sticking treatment on nanoimprint molds, replacing the self-assembled monolayer currently used. It satisfies the requirements of not only low …
-
Adhesion of Silicone Hydrogel to Silicate Substrates
The challenge of demolding during the cast molding process of silicone hydrogel contact lenses can be addressed with the application of hydrophobic coatings on the surface of lens mold. In particular, the adhesion between silicone hydrogel and silicate substrates was minimized by applying silane …
-
Alkali Silica Reaction Mitigation Using Glycerin
… process as the mortar bars commonly broke during demolding as the glycerin content increased. Consequently, the testing method was adjusted by allowing the mortar bars to remain in the molds for up to 28 days to account for this issue.
-
Durability of Hybrid Large Area Additive Tooling for Vacuum Infusion of Composites
… roughen, resulting in increased difficulty of demolding and a rougher surface finish. After the 14th infusion, the part required destructive force to be removed from the mold. The surface geometry remained consistent within ±0.5 mm of the design over the course of the infusions, and no …
-
Nanoscale modulation of friction and triboelectrification with application to electrohydrodynamic nanolithography
… molds with PDMS. It was found that the demolding action induced charges on the PDMS surface in a pattern closely correlated with the nanotexture. This new technique not only enables facile fabrication of nanoscale charge patterns on insulator surfaces but provide more specific targets …
-
Effect of powder shape and size on the properties of low- viscosity iron-based feedstock used in low-pressure powder injection molding
… of ethylene-vinyl acetate for their surfactant, demolding, and thickening effects, respectively, and where the balance of the binder was constituted of paraffin wax. Rectangular specimens were injected at constant volumetric flow and thermally wick-debound and sintered at high temperatures under …
-
Interfacial debonding from a sandwiched elastomer layer
… at both interfaces. Motivated by an industrial demolding problem, numerical experiments are conducted to derive insights into preferential debonding at one of the two interfaces, including for curved adherends. Results reported herein should help engineers design an elastomer layer sandwiched …
-
Enhanced functionality of monodispersed polymeric nanocarriers in medicine
… being significant as they lead to fundamental demolding challenges in prior imprint processes; and (iv) Multi-layer nanocarriers which can potentially provide sophisticated functionality such as tailored release kinetics of one or more drugs. By understanding the requirements of bio-functional …
-
Living the life the hard way : bacterial surface mechanosensing
… on hydrogel that are introduced by molding/demolding as opposed to surface stiffness. AFM images suggest that the surface porosity is the same but the surface roughness is smaller on thin than on thick hydrogel. AFM single-cell force spectroscopy further suggests that bacteria respond to …
-
Development of high durability concrete for the Arabian Gulf environment.
… continuous water curing, no water curing after demolding, and air drying after 3 and 7 days of initial water curing were investigated. The properties investigated include (1) consistency and setting times of cement pastes, workability and workability loss with time, (2) engineering properties …
-
Development of high performance concrete using combinations of mineral admixtures.
… continuous moist curing, no moist curing after demolding and air drying after 7-days of initial moist curing. Six different concrete mixes were prepared with ordinary portland cement and a blend of portland cement and combinations of fly ash+silica fume and slag+silica fume The …
-
Process induced distortions of composite structures
… approach based on the shape of the part after demolding will produce inaccurate results as the trimming operations release stresses and affect the distortion field of the structure. Finally, scripts were developed to automate the mirroring process of calculated distortions.
-
Data-Driven Modeling and Control of Batch and Batch-Like Processes
… is cooled while still rotating the mold. Once demolding temperatures are achieved, the finished part is removed from the mold. Its potential as a manufacturing process for polymeric components is limited by a number of concerns including difficulties in process control, in particular, …
-
Experimentelle Untersuchung von Einflussgrößen auf die Entformungskraft beim Compression Molding
Research into demoulding forces and vulcanization mold fouling is essential for the development of elastomer materials, as these factors affect product quality, energy consumption and environmental impact. Understanding this helps to develop more efficient processes, reduce material usage and …