Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 49 for “"deoxidation"”.

  1. Deoxidation mechanisms in liquid steel.

    … techniques have been employed to investigate the deoxidation kinetics and changes in oxidation product morphology in low carbon steel melts. The techniques have been used to study the deoxidation processes associated with aluminium, titanium, silicon, zirconium and a calcium-aluminium alloy.After …

    sheffield-hallam Download PDF for Deoxidation mechanisms in liquid steel. (opens in a new tab)

  2. The deoxidation of steel with simple and complex deoxidisers

    The deoxidation of steel with complex deoxidisers was studied at 1550°C and compared with silicon, aluminium and silicon/aluminium alloys as standards. The deoxidation alloy systems, Ca/Si/Al, Mg/Si/Al and Mn/Si/Al, were chosen for the low liquidus temperatures of many of their oxide mixtures and …

    aston Download PDF for The deoxidation of steel with simple and complex deoxidisers (opens in a new tab)

  3. The Deformation Characteristics of Deoxidation Products in Hot Rolled Steel. Available in 2 volumes.

    The deoxidation of: steel at 1600°C. was achieved by the use of Mn-Si-Al alloys. Steels containing silicate inclusions of various compositions were deformed by rolling, and the deformation of these inclusions was studied with reference to various parameters. Electron-probe micro analysis revealed …

    aston Repository record for The Deformation Characteristics of Deoxidation Products in Hot Rolled Steel. Available in 2 volumes. (opens in a new tab) Download PDF for The Deformation Characteristics of Deoxidation Products in Hot Rolled Steel. Available in 2 volumes. (opens in a new tab)

  4. Deoxidation studies : The interaction of vitreous silica with molten aluminium and systems of aluminium, manganese, iron and silicon.

    The interaction of aluminium with silica and silicates isthermodynamically inevitable and leads to reaction effects in many systems. The resultant reactions can continue over a wide temperature range including both liquid and solid state systems such as molten aluminium handling units and the heat …

    sheffield-hallam Download PDF for Deoxidation studies : The interaction of vitreous silica with molten aluminium and systems of aluminium, manganese, iron and silicon. (opens in a new tab)

  5. Improvement of steel quality by using hydrocarbon gas in a converter

    … other nonmetallic oxide inclusions formed during deoxidation is an important factor in producing 'quality' steel. Although a variety of practices are employed to encourage floatation of such deoxidation products prior to solidification, complete removal is never achieved. The amount of Al₂O₃ …

    ubc Repository record for Improvement of steel quality by using hydrocarbon gas in a converter (opens in a new tab) Download PDF for Improvement of steel quality by using hydrocarbon gas in a converter (opens in a new tab)

  6. THE EFFECT OF DEOXIDATION PRACTICE ON NON-METALLIC INCLUSIONS AND THEIR EFFECT ON MECHANICAL PROPERTIES OF A LOW ALLOY STEEL

    … The steel was fabricated via two different deoxidation practices; conventional Al killing and a proposed Si-Al killing technique. The casting method employed was continuous casting and material from different heats was analysed. Their respective inclusion contents were assessed in the …

    whiterose Download PDF for THE EFFECT OF DEOXIDATION PRACTICE ON NON-METALLIC INCLUSIONS AND THEIR EFFECT ON MECHANICAL PROPERTIES OF A LOW ALLOY STEEL (opens in a new tab)

  7. Non-metallic inclusions in electroslag refined ingots

    … of these electrodes was done under different deoxidation practices, namely pure Al, CaSi, CaSiAlBa and AISi alloys. Through this research it was found that inclusions in the electrode are physically and chemically transformed in the electrode tip by the thermal gradients. Inclusions are …

    ubc Repository record for Non-metallic inclusions in electroslag refined ingots (opens in a new tab) Download PDF for Non-metallic inclusions in electroslag refined ingots (opens in a new tab)

  8. The Preparation and Characterisation of Graphene and Its Analogues

    … preparations for graphene, the solvothermal deoxidation of graphene oxide (GO) is highly attractive as it potentially offers a relatively economical and scalable manufacturing route for use in industrial applications. Unfortunately, the deep deoxidation of GO and highly dispersable reduced GO …

    whiterose Download PDF for The Preparation and Characterisation of Graphene and Its Analogues (opens in a new tab)

  9. The influence of interfacial turbulence on the rate of oxidation and deoxidation of molten copper and silver using low-momentum vertical gas jets

    … turbulence does not occur on oxidation. Copper deoxidation at 1220°C using low-momentum jets of pure hydrogen at flow rates of 1500 and 3000 cm³ min⁻¹ was studied, and was found not to depend on hydrogen flow rate, lance height, and starting oxygen concentration. The rate-controlling step was …

    ubc Repository record for The influence of interfacial turbulence on the rate of oxidation and deoxidation of molten copper and silver using low-momentum vertical gas jets (opens in a new tab) Download PDF for The influence of interfacial turbulence on the rate of oxidation and deoxidation of molten copper and silver using low-momentum vertical gas jets (opens in a new tab)

  10. Oxide inclusion evolution and factors that influence their size and morphology

    … composition, and morphology following steel deoxidation were found to depend on the steel conditions during deoxidation, and the method/sequence of deoxidant addition. The oxide size distribution evolved from lognormal to fractal and the distribution shape was quadratic or linear on a log-log …

    must-thes Repository record for Oxide inclusion evolution and factors that influence their size and morphology (opens in a new tab)

  11. An experimental study of non-metallic inclusions precipitation and its effect on impact toughness variations in low alloy steel subjected to complex deoxidation

    … most common operations of ladle treatment were deoxidation and alloying. More sophisticated methods like vacuum degassing, chemical reheating, or injection of powdered refining mixtures have also been successfully implemented into steelmaking practice. Treatment of large quantities of steel at …

    northern-iowa Repository record for An experimental study of non-metallic inclusions precipitation and its effect on impact toughness variations in low alloy steel subjected to complex deoxidation (opens in a new tab)

  12. Thermodynamics of the Fe-V-O System

    … between V and O were determined, and the deoxidation reactions occurring when V is used as a deoxidizer were studied. Deoxidation diagrams are presented for V concentrations up to 12 wt. %. </p> <p> In the second part the thermodynamic equilibria between the lower oxides of vanadium (V - …

    greece Repository record for Thermodynamics of the Fe-V-O System (opens in a new tab)

  13. Thermodynamics of the Fe-V-O System

    … between V and O were determined, and the deoxidation reactions occurring when V is used as a deoxidizer were studied. Deoxidation diagrams are presented for V concentrations up to 12 wt. %. </p> <p> In the second part the thermodynamic equilibria between the lower oxides of vanadium (V - …

    mcmaster Repository record for Thermodynamics of the Fe-V-O System (opens in a new tab)

  14. MATERIAL AND ELECTROCHEMICAL PROPERTIES OF WROUGHT AND ADDITIVELY MANUFACTURED ALUMINUM ALLOYS- EFFECTS OF SURFACE PRETREATMENT AND SURFACE FINISHING

    … is pretreated by a degrease step followed by deoxidation before applying the coating. The other TCP coating involves a simplified pretreatment which does not require the deoxidation step. The formation and structure of the conversion coatings are compared using analytical techniques. Then, the …

    msu Repository record for MATERIAL AND ELECTROCHEMICAL PROPERTIES OF WROUGHT AND ADDITIVELY MANUFACTURED ALUMINUM ALLOYS- EFFECTS OF SURFACE PRETREATMENT AND SURFACE FINISHING (opens in a new tab)

Page 1 of 3