Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 38 for “"design recommendation"”.

  1. Human Factors Design Recommendation Optimisation: A process development for human-machine interface of the battery status on flight decks for electric regional aircrafts

    … of batteries compared to fuel affects the design considerations of the battery HMI for electric regional aircrafts. Lastly, the study is evaluating if low-fidelity prototyping is an effective way of validating the effectiveness of the process. The methodology used in this study is based on …

    chalmers Repository record for Human Factors Design Recommendation Optimisation: A process development for human-machine interface of the battery status on flight decks for electric regional aircrafts (opens in a new tab)

  2. Acceleration Characteristics Study and Acceleration Lane Length Design for Metered Ramps

    … performance data on vehicle acceleration for the design of acceleration lane length at metered ramps. At present, the AASHTO Green Book acceleration lane length design guidance is currently employed by most state DOTs for new proposed ramp metering sites or retrofitting of existing unmetered …

    unr Repository record for Acceleration Characteristics Study and Acceleration Lane Length Design for Metered Ramps (opens in a new tab)

  3. Experimental and Computational Analysis of an Axial Turbine Driven by Pulsing Flow

    … physical insights and to provide guidelines for designing turbines to be driven by pulsing flow. An experimental rig was built to compare steady flow with pulsing flow. Compressed air was used in place of combustion gases; pressure pulses were created by rotating a ball valve with a motor. The …

    byu Repository record for Experimental and Computational Analysis of an Axial Turbine Driven by Pulsing Flow (opens in a new tab) Download PDF for Experimental and Computational Analysis of an Axial Turbine Driven by Pulsing Flow (opens in a new tab)

  4. Structural behavior of reinforced concrete members with cold joints : characterization and modeling in disturbed regions

    … development of STM-based analytical model and design recommendation. The major achievements of this work include identifying and quantifying influential parameters governing cold joint behavior, developing design recommendations for RC structures with cold joints in disturbed regions …

    texas Repository record for Structural behavior of reinforced concrete members with cold joints : characterization and modeling in disturbed regions (opens in a new tab)

  5. Real-time scheduling and synchronization for the NPS Autonomous Underwater Vehicle

    … safety of the vehicle. This thesis describes the design and development of real-time scheduling software, which is capable of scheduling and synchronizing the periodic and aperiodic processes required by the AUV-II. A design recommendation of a graphical user interface has been developed to …

    nps Repository record for Real-time scheduling and synchronization for the NPS Autonomous Underwater Vehicle (opens in a new tab)

  6. Evaluating User Preferences for Interaction for Single User Cross Reality Transition of 3D Virtual Objects

    … is an analysis of 1200 inputs that lead to a design recommendation based on observations and interviews. These recommendations will serve as guidelines for researchers and developers when developing CR applications that involve the transition of 3D virtual objects.

    calgary Repository record for Evaluating User Preferences for Interaction for Single User Cross Reality Transition of 3D Virtual Objects (opens in a new tab)

  7. Improving IP Literacy among Brazilian Startups: the Design of an Innovative Learning System

    … increased in the last years. This work uses Design Science Research to develop an innovative artifact to improve IP literacy among Brazilian startups. Using the design process stated in the methodology, we analyzed existing IP literacy systems and concluded with design recommendation for …

    qucosa-diss

  8. Improving situational awareness in the counter-IED fight with the utilization of unmanned sensor systems

    An organized and thorough systems design framework is necessary to successfully address large-scale, complex problems, such as the utilization of unmanned sensor technologies to provide situational awareness (SA) in the counter-improvised explosive device (C-IED) fight. An appropriate systems …

    nps Repository record for Improving situational awareness in the counter-IED fight with the utilization of unmanned sensor systems (opens in a new tab)

  9. Investigation of the Effects of Spacing between Bolts in a Row in a Single-Shear Timber Connection Subjected to Reverse Cyclic Loading

    … tests. The reverse cyclic protocol was based on recommendations by the Consortium of Universities for Research in Earthquake Engineering (CUREE) for testing woodframe structures. The same connection configurations were also subjected to monotonic loading for an additional forty-five tests. …

    vt Repository record for Investigation of the Effects of Spacing between Bolts in a Row in a Single-Shear Timber Connection Subjected to Reverse Cyclic Loading (opens in a new tab)

  10. Model Scale Experiment and Full-Scale Numerical Simulations of Geothermal Piles for Cooling Dominated Climate

    … soil mass. The third step discusses the design and execution of a model-scale laboratory test. This test includes running long-term mechanical and cyclic thermal loading on a compacted native clay soil. Extensive long-term creep (i.e. over 24 hrs.), shrink-swell, and heat propagation …

    tamu Repository record for Model Scale Experiment and Full-Scale Numerical Simulations of Geothermal Piles for Cooling Dominated Climate (opens in a new tab)

  11. Adapting Roof Support Methods for Anchoring Satellites on Asteroids

    The use of anchorage in satellite and spacecraft design has been largely restricted to harpoon-inspired technology based on anticipated low strengths of cometary and asteroid material. Initial results from the Rosetta mission to comet 67P/Churyumov- Gerasimenko, however, have demonstrated both …

    wvu Repository record for Adapting Roof Support Methods for Anchoring Satellites on Asteroids (opens in a new tab)

  12. Portable water filled barrier with internal honeycomb cells

    … <p>loading. The PWFB with internal cells is designed based on the prototype of the JB</p> <p>32 barrier, where quadrangle-shaped honeycomb cells are bounded on the interior</p> <p>surface. In the early stage of this research, small-scale barrier specimens are obtained</p> <p>via 3D printing …

    iastate Repository record for Portable water filled barrier with internal honeycomb cells (opens in a new tab)

  13. Improving recommendation system efficiency through hardware software co-design

    Recommendation systems are the core workload behind algorithmic feeds, advertising placement, and music recommendation. Deep recommendation models rely on memory intensive embedding tables to convert categorical context into continuous values. The models spend a significant fraction of their …

    texas Repository record for Improving recommendation system efficiency through hardware software co-design (opens in a new tab)

  14. Application of optimization and machine learning techniques in predicting pavement performance and performance-based pavement design

    … then used to solve a performance-based pavement design problem along</p> <p>with an evolutionary optimization algorithm. In the second approach, the structural behavior</p> <p>of a gantry crane way pavement at intermodal facilities is investigated by assessing the</p> <p>interactions between …

    iastate Repository record for Application of optimization and machine learning techniques in predicting pavement performance and performance-based pavement design (opens in a new tab)

  15. Flexural and Serviceability Behaviour of Steel-GFRP Hybrid Reinforced Concrete Beams and One-way Slabs

    … and experimental studies. It also provides design recommendations for designing hybrid RC flexural members and assesses the design equations of deflection, crack width, yielding and ultimate moment capacity in North American standards and guidelines. This research started with analytical …

    concordia Download PDF for Flexural and Serviceability Behaviour of Steel-GFRP Hybrid Reinforced Concrete Beams and One-way Slabs (opens in a new tab)

  16. Investigating delamination behavior of curved post-tensioned concrete structures

    … modeling procedures, and (4) proposing practical design recommendations to improve the structural performance. To achieve the objectives stated above, three curved post-tensioned concrete wall assemblies were fabricated and tested under monotonically increasing prestressing loads. To study the …

    texas Repository record for Investigating delamination behavior of curved post-tensioned concrete structures (opens in a new tab)

  17. Design and Interpretability of Contour Lines for Visualizing Multivariate Data

    … geospatial data. We present five different designs for stylizing contour lines, and investigate their interpretability using three crowdsourced studies. We evaluated the designs through a set of common geospatial data analysis tasks on a four-dimensional dataset. Our first two studies …

    sask Repository record for Design and Interpretability of Contour Lines for Visualizing Multivariate Data (opens in a new tab)

  18. Hydrologic Analysis of Rain Garden Performance

    … ongoing system monitoring is needed to quantify design parameters between June 2012 and June 2014 for seven monitored locations. This study presents which factors are the most significant to affect the gardens’ hydrological performance for future design. Therefore, a data-driven PCA and MLR model …

    umkc Repository record for Hydrologic Analysis of Rain Garden Performance (opens in a new tab)

  19. Improving durability of bridge decks by transverse prestressing

    … to examine the concept of improving bridge deck design by the application of transverse prestressing and to specifically examine the improvement of durability due to protection from chloride-induced corrosion. The secondary objective was to provide structural design related recommendations for …

    texas Repository record for Improving durability of bridge decks by transverse prestressing (opens in a new tab)

  20. Local scour at bridge sites

    … Based upon a survey of existing material, a design recommendation for the estimation of local scour depths at bridge piers is also presented.

    auckland-ms Repository record for Local scour at bridge sites (opens in a new tab)

Page 1 of 2