Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 74 for “"deviator"”.
-
Characteristics of Dynamic Triaxial Testing of Asphalt Mixtures
… conditions in terms of the magnitude of the deviator and confining stresses have been specified. In addition, a repeated haversine axial compressive load pulse of 0.1 second and a rest period of 0.9 second are commonly used as part of the triaxial testing conditions. The overall objective of …
-
Testing and modeling of subgrade resilient moduli for Tennessee soils
… a parameter obtained by the ratio of the deviator stress to the axial strain, has been accepted to indicate a soil's resilience response under repeated loading.</p> <p>A laboratory testing program was implemented to determined the resilient moduli of widely used subgrade soils in the state …
-
A creep study of an undisturbed saturated clay
… the creep of a sensitive clay under different deviator stresses is presented. The effect of deviator stress on pore-pressures within the soil is also studied. An explanation of the phenomenon of creep is offered which is based on a consideration of the micro-structure of the clay. Experimental …
-
Yielding of unsaturated soil.
… stress state variables : mean net stress, deviator stress, suction and specific volume. An important feature of the models is the suggestion of the existence of a yield surface in mean net stress : deviator stress : suction space. Suction-controlled triaxial tests were performed to …
-
The resilient moduli of subgrade soils in The East Tennessee Area
… on the compacted samples over a range of deviator stresses. Variations in the testing stress level and material properties such as water content and dry density were found to significantly affect the resilient modulus.</p> <p>A second order polynomial equation, in terms of deviator stress …
-
Three-dimensional constraint based fracture mechanics
… a parameter related to the out-of-plane stress deviator. The proximity to plane stress has been assessed using a parameter related to the radial stress deviator. At the intersection of the free surface and the crack tip, an elastic perfectly-plastic comer field which is different to the plane …
-
Ensaios triaxiais dinâmicos de um solo arenoso
… degrees of saturation, confining pressures and deviator stresses, frequencies and duration of deviator stress. Some conventional triaxial tests, unconsolidated undrained, and CBR test were made in order to seek possible correlations of resilient modulus with other parameters, such as deformation …
-
Permanent deformation and resilient modulus of unbound granular materials
… of permanent deformations increased with deviator stress; 2) higher fines contents (12.4% 12.6%) result in lower permanent deformations than lower fines contents (0.8% 2.2%) for the materials with laboratory reconstituted fines contents; 3) relative densities in the range of 85% to 95% …
-
The resilient response of fine-grained Tennessee subgrade soils
… The magnitude of applied confining pressure and deviator stress was also varied during testing to simulate variations in depth and lateral location from the applied wheel load. The specimen water content and the magnitude of applied deviator stress were found to significantly affect the resilient …
-
Behavior of Sensitive Clay Subjected to Static and Cyclic Loading
… governing parameters are listed as: cyclic deviator stress, pore water pressure, axial strain, pre-consolidation pressure, confining stress, initial degree of saturation, water content, liquidity index and the number of cycles. The present study has introduced the governing parameters in two …
-
Observations on Athabaska Glacier and their relation to the theory of glacier flow
… second invariants of the strain rate and stress deviator tensors is compared with the simple power law as determined by laboratory experiments with ice. Comparison is made both for borehole measurements and measurements of change of surface velocity across transverse lines. Agreement is …
-
The development of a periodic loading apparatus for triaxial testing
… versatile. It is possible to apply a periodic deviator stress as well as a periodic confining stress and to vary the pattern of stress applications quite readily. The same apparatus could be utilized to test soil samples under static triaxial loading conditions also.
-
Triaxial tests for typical Winnipeg clays
… of the pore pressure change due to applied deviator stress indicates Winnipeg clays as being lightly over-consolidated. The rate of strain is seen to influence the test results in the consolidated undrained tests. For reliable results in such a test a strain rate with a time to failure of …
-
Tensile-Flexural Behaviour of Carbon-Fibre Reinforced Polymer (CFRP) Prestressing Tendons Subjected to Harped Profiles
… of tensile and flexural stresses at the deviator locations. Existing models for predicting the capacity of a deviated tendon appear to be either unconservative or excessively conservative, limiting the application of CRFP tendons as external post-tensioning. This thesis describes an …
-
Experimental investigation for constitutive modeling of fine sand under cyclic loading using hollow cylinder specimens
… principal stress axes with a constant amplitude deviator stress, as well as the stress direction reversals have significant effects on the rate of pore water pressure buildup, the triggering of a liquefaction flow failure in contractive sand and the rate of accumulation of deformation. The rate …
-
The mechanical consequences of internal erosion on gap-graded soil
… size distributions exhibit slightly higher peak deviator stresses than those which were heterogeneous. The results highlight the importance of ensuring homogeneity of post-erosion. Additional triaxial erosion tests on the gap-graded soil having undergone different amounts of internal erosion at …
-
Creep rupture of saturated undisturbed clays
… A relationship was found to exist between the deviator stress, strain and current strain rate during undrained triaxial tests having the same consolidation history. This relationship permitted the prediction of the results of constant strain rate tests based on the results of creep rupture …
-
Vane shear tests in Lake Agassiz clays
… from one test hole were compared to one-half the deviator stress as determined from triaxial tests. In addition to the determination of the reliability of vane test results in varved clays, the suitability of the vane test equipment was also studied. The test results indicate that the vane shear …
Page 1 of 4