Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 134 for “"device model"”.

  1. A Device Model for Intermediate Band Semiconductors

    … is that it has not been possible to optimize IB device geometry because no device model has existed that could capture all the effects present in IB materials (e.g., charge transport inside the IB and self-consistent optics). In this thesis I introduce my new device model for intermediate band …

    ottawa-retro Repository record for A Device Model for Intermediate Band Semiconductors (opens in a new tab)

  2. Compact non-quasi-static MOSFET device model

    Thesis (M.S.)--Michigan State University. Department of Electrical Engineering and System Science, 1988

    msu Repository record for Compact non-quasi-static MOSFET device model (opens in a new tab)

  3. Charged device model electrostatic discharge protection and test methods for integrated circuits

    … Specifically, this work focuses on charged device model (CDM) protection and test methods. In this work it is shown that the CDM robustness of an I/O can be increased by proper biasing of the gates during an ESD event. These gate bias networks are particularly useful because they do not add …

    uiuc Repository record for Charged device model electrostatic discharge protection and test methods for integrated circuits (opens in a new tab)

  4. iSMILE: An integrated system for device model design, parameter extraction, and circuit simulation

    … and a parameter extractor to explore new device technology lies in the time-consuming process of developing and verifying new models. In this thesis, a novel CAD system which integrates device model design, circuit simulation, and parameter extraction into one design environment is …

    uiuc Repository record for iSMILE: An integrated system for device model design, parameter extraction, and circuit simulation (opens in a new tab)

  5. Full chip modeling for predictive simulation of charged device model electrostatic discharge events

    With downscaling of device dimensions in integrated circuits (ICs), the risk of circuit failure due to electrostatic discharge (ESD) is increasing. In particular, the increased usage of automated handlers is causing charged device model (CDM) ESD induced failures to become more prominent. Gate …

    uiuc Repository record for Full chip modeling for predictive simulation of charged device model electrostatic discharge events (opens in a new tab)

  6. Predictive transient circuit simulations of charged device model ESD events in system in package chips

    This thesis focuses on obtaining circuit models to simulate the voltage stress experienced by the devices on integrated circuit components stressed by the charged device model (CDM) electro-static discharge (ESD) testers. The thesis presents a simple package modeling methodology that can be used to …

    uiuc Repository record for Predictive transient circuit simulations of charged device model ESD events in system in package chips (opens in a new tab)

  7. Charged device model electrostatic discharge failures in system on a chip and system in a package designs

    … more robust than others during a CDM (Charged Device Model) event. Finally, the effects on the intensity of the CDM stress based on single-die or stacked-die packages will be compared.

    uiuc Repository record for Charged device model electrostatic discharge failures in system on a chip and system in a package designs (opens in a new tab)

  8. The Evaluation of Device Model Dependence in the Design of a High-Frequency, Analog, CMOS Transconductance-C Filter

    … to have the ability to predict the effects of device model variation when designing integrated transconductance-C type active filters. Applying these filters to integrated circuit design has become increasingly popular due to its ease of implementation in monolithic form. With the introduction …

    portland-state Repository record for The Evaluation of Device Model Dependence in the Design of a High-Frequency, Analog, CMOS Transconductance-C Filter (opens in a new tab)

  9. A prototype parallel multi-FPGA accelerator for SPICE CMOS model evaluation

    … to exploit the inherent parallelism in the device model evaluation phase within the SPICE simulator. A code transformation flow which converts the high-level device model code to structural VHDL was also implemented. This flow showed that an automatic compiler system to design, map, and …

    soton Download PDF for A prototype parallel multi-FPGA accelerator for SPICE CMOS model evaluation (opens in a new tab)

  10. Modeling And Analysis Of Power Mosfets For High Frequency Dc-dc Converters

    … structure and its power loss. The analytical device model, combined with circuit modeling, cannot reveal the relationship between device structure and its power loss due to the highly non-linear characteristics of power MOSFETs. A physically-based mixed device/circuit modeling approach is used …

    ucf Repository record for Modeling And Analysis Of Power Mosfets For High Frequency Dc-dc Converters (opens in a new tab)

  11. Large signal model development and high efficiency power amplifier design in cmos technology for millimeter-wave applications

    This dissertation presents a novel large signal modeling approach which can be used to accurately model CMOS transistors used in millimeter-wave CMOS power amplifiers. The large signal model presented in this work is classified as an empirical compact device model which incorporates …

    gatech Repository record for Large signal model development and high efficiency power amplifier design in cmos technology for millimeter-wave applications (opens in a new tab)

  12. Circuit modeling of spintronic devices: a SPICE implementation

    … circuit has to leverage an under- standing of device physics. Understanding device physics is essential when optimizing a design for speed, power, etc. These characteristics affect the bottom line when considering an integrated circuit used in a particular application. In order for there to be …

    gatech Repository record for Circuit modeling of spintronic devices: a SPICE implementation (opens in a new tab)

  13. Noisy transistor models for microwave circuit CAD

    … noise applications. Therefore, accurate noise models are essential to ensure robust simulation and optimization during the design process. The sophistication of modern communication systems urged the need of monolithic microwave integrated circuits (MMICs), which contain several MESFETs or …

    ottawa-retro Repository record for Noisy transistor models for microwave circuit CAD (opens in a new tab)

  14. Ferroelectric Field-Effect Transistors in Analog Applications: Demonstrated in Time-Domain Neuromorphic Computing Cells

    … focus to architectural innovation and emerging device technologies. Ferroelectric field-effect transistors (FeFETs) are non-volatile memory elements which offer new opportunities for energy-efficient computing, particularly in compute-in-memory (CIM) architectures. This thesis presents a novel …

    rit Repository record for Ferroelectric Field-Effect Transistors in Analog Applications: Demonstrated in Time-Domain Neuromorphic Computing Cells (opens in a new tab)

  15. PARASPICE: A parallel direct circuit simulator for shared-memory multiprocessors

    … for the three most compute-intensive modules: device model evaluation (LOAD), direct solution of sparse linear systems (SOLVE), and local truncation error estimation (TRUNC), which account for at least 95 percent of the total job time. Therefore, it is suitable for a wide range of shared-memory …

    uiuc Repository record for PARASPICE: A parallel direct circuit simulator for shared-memory multiprocessors (opens in a new tab)

  16. THE MATHEMATICAL MODELING OF TIME-DEPENDENT PHOTOCONDUCTIVE PHENOMENA IN SEMICONDUCTORS.

    … presents results pertaining to the mathematical modeling of semiconductor photoconductors and includes the formulation, analysis, and solution of photoconductive device model equations. The fundamental semiconductor device equations of continuity and transport are derived for the case of a …

    arizona-thes Repository record for THE MATHEMATICAL MODELING OF TIME-DEPENDENT PHOTOCONDUCTIVE PHENOMENA IN SEMICONDUCTORS. (opens in a new tab)

  17. Elektros įrenginiu valdymas trumposiomis žinutėmis /

    The aim of this work was to make an electronic device remotely controlled by text message. The objectives: complete analysis of parallel devices; choose correct elements, design an electronic device model, run tests. Once analysis was completed below conclusions were made: electronic device works …

    vilnius Repository record for Elektros įrenginiu valdymas trumposiomis žinutėmis / (opens in a new tab)

Page 1 of 7