Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 11 of 11 for “"diagonal strut"”.

  1. Plastic and elastic behavior of infilled frames subjected to in-plane loading

    … results indicated that an appropriate equivalent strut could closely match the infilled frame behavior. The model had the same frame beam and columns. The masonry infill was replaced by an equivalent diagonal strut. The strut had the same infill net thickness and Young's modulus. The model …

    utk-theses Repository record for Plastic and elastic behavior of infilled frames subjected to in-plane loading (opens in a new tab)

  2. Συμπεριφορά κόμβων δοκών-υποστυλωμάτων από οπλισμένο σκυρόδεμα σε σεισμικές καταπονήσεις

    … to the joint is predominantly resisted by a diagonal strut mechanism. For this purpose two test series are carried out on full-size beam column joint sub-assemblages which are subjected to cyclic loading. The first test series is concerned with the investigation of the validity of the current …

    greece Repository record for Συμπεριφορά κόμβων δοκών-υποστυλωμάτων από οπλισμένο σκυρόδεμα σε σεισμικές καταπονήσεις (opens in a new tab)

  3. Modal analysis and active vibration control of the Naval Postgraduate School Space Truss

    … and analyze data. For active control, an active strut, consisting of a piezoceramic stack, a force transducer, and mechanical interfaces, was substituted in place of a critical diagonal strut and acted as a control actuator. The frequency response of the system was determined and a integral plus …

    nps Repository record for Modal analysis and active vibration control of the Naval Postgraduate School Space Truss (opens in a new tab)

  4. Tests on GFRP Reinforced Concrete Knee-Joints Subjected to Negative Moments

    … was prevented and occurred by failure of diagonal strut. The addition of confinement stirrups significantly increased the ultimate strength as well as the maximum deflection. The effect of changing corner geometry has a minor effect on the specimen strength; however, brittle failure in the …

    waterloo Repository record for Tests on GFRP Reinforced Concrete Knee-Joints Subjected to Negative Moments (opens in a new tab)

  5. A finite element-based approach for the analysis and design of 3D reinforced concrete elements and its applications to D-regions

    … the so-called D-regions with a 3D behaviour. The strut-and-tie method and the stress field method are consistent and rational tools for the analysis and design of D-regions, but while their application to 2D elements is well covered in literature, its extension to 3D is problematic. This generally …

    upv Repository record for A finite element-based approach for the analysis and design of 3D reinforced concrete elements and its applications to D-regions (opens in a new tab)

  6. Experimental and analytical evaluation of curved bar nodes in reinforced concrete frames joints: strut and tie approach

    … outside of the joint region, the angle between diagonal struts and main ties (30^0, 45^0,and 60^0), and the rebar arrangements (separate, bundled or multiple layers) of longitudinal reinforcement. Three bend radius were considered: (i) the standard hook bend radius value; (ii) the ACI provision …

    texas Repository record for Experimental and analytical evaluation of curved bar nodes in reinforced concrete frames joints: strut and tie approach (opens in a new tab)

  7. Modelling In-plane Shear in Partially Reinforced Concrete Masonry

    Diagonal cracking is the most commonly reported mode of failure for masonry walls subject to in-plane shear loads. Finite element studies were therefore carried out to seek better understanding of this failure mode by attempting to capture the diagonal shear cracks in unreinforced concrete masonry …

    calgary Repository record for Modelling In-plane Shear in Partially Reinforced Concrete Masonry (opens in a new tab)

  8. Αποτίμηση της σεισμικής συμπεριφοράς κτιρίων από ξυλόπηκτη φέρουσα τοιχοποιία

    … Τimber-framed masonry panels with two diagonal braces are investigated. The simulation is based on an elastoplastic finite element model for wood members using the orthotropic Hill's yield criterion and an associative flow rule. The hardening of the material is considered isotropic. …

    greece Repository record for Αποτίμηση της σεισμικής συμπεριφοράς κτιρίων από ξυλόπηκτη φέρουσα τοιχοποιία (opens in a new tab)

  9. Influencia de la Tabiquería en el Análisis Sísmico de un Edificio de Concreto Armado de 3 Pisos y Azotea en El Distrito de San Martín De Porres

    … modelamiento de los tabiques a través del puntal diagonal y se realiza un análisis sísmico estático y dinámico. Los resultados revelan un cambio significativo de rigidez entre los pisos 1 y 2, indicando la presencia de un posible piso blando en la estructura. Este análisis contribuye a comprender …

    upc-peru Repository record for Influencia de la Tabiquería en el Análisis Sísmico de un Edificio de Concreto Armado de 3 Pisos y Azotea en El Distrito de San Martín De Porres (opens in a new tab)

  10. Ενίσχυση και επισκευή δομικών στοιχείων κόμβων από ωπλισμένο σκυρόδεμα με σύνθετα υλικά

    … seismic loading (empirical or semi-empirical and diagonal strut-and-tie models). In the presentation, there are also analytical models for predicting failure mode critical values, including 2D and 3D finite element models used by various researchers. iii. In the presentation of modern codes’ …

    greece Repository record for Ενίσχυση και επισκευή δομικών στοιχείων κόμβων από ωπλισμένο σκυρόδεμα με σύνθετα υλικά (opens in a new tab)