Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 61 for “"direct-bonding"”.
-
Direct bonding dissimilar optical materials
… the work conducted during this project on direct bonding of dissimilar optical materials at the Optoelectronics Research Centre, University of Southampton. It covers the history and background of the art, before progressing to the development of unique bonding processes used during the …
-
A direct bonding system for orthodontic attachments
A number of adhesive systems for the direct bonding of orthodontic attachments to the tooth surface have been reported during the last five years. The purpose of this investigation is to evalua te clinically a new bonding system which appears to have apparent advantages over previous techniques. …
-
Direct bonding of metals to ceramics: Interface investigations
There is a growing interest in metal/ceramic bonding for a wide range of applications from electronic packaging to biomedical implants. In this research work, results are reported for direct bonding of copper to ceramic (e.g., $\rm Al\sb2O\sb3$ and ZrO) in a furnace under inert atmosphere (e.g., …
-
A cyanoacrylate direct bonding system of orthodontic attachments
Thesis (M.Sc.D.)--Boston University School of Graduate Dentistry, 1973. Orthodontics.
-
A Study of Microleakage in Orthodontic Direct Bonding Adhesive Systems
If orthodontic direct bonding adhesives are to be successful, they must withstand the destructive influences of the oral environment and form a durable bond with enamel. Investigators have noted that moisture may be the greatest deterrent to an adhesive bond and water may have the ability to …
-
Optimization of surface preparation technique for unipolar silicon direct bonding
A special wafer bonding method called the Silicon Direct Bonding technique is used to study the bonding of unipolar (n-type, <100> oriented) silicon wafers. The primary objective of this thesis project is to find an optimum surface preparation technique for subsequent silicon wafer bonding. Wafer …
-
An Evaluation of the Bond Strength and Failure Site of Two Orthodontic Direct Bonding Systems
Two commercially available orthodontic direct bonding systems were evaluated for ultimate tensile strength and failure site. Both Endur (Ormco Corp.) and Solo-Tach (L. D. Caulk Co.) are Bis-GMA resin adhesives, but only Endur required the use of a sealant prior to bonding. Metal brackets intended …
-
Clinical Acceptability of Digital Indirect Bonding Compared to Direct Bonding by Varying Orthodontic Experience: Pilot Study
… orthodontic bracket placement between digital indirect and direct bonding techniques and between participants with three levels of varying orthodontic experience (dental students, orthodontic residents, experienced orthodontists) using one intervention model. The percentage of clinically …
-
An Evaluation of the Bond Strength and Failure Site of Composite Resin and Glass Ionomer in Identical Orthodontic Direct Bonding Systems
… of enamel, fluoride release, and ease of debonding. This study compared in vitro bond strengths of glass ionomers with a composite resin. Two luting glass ionomers, (Ketaccem and Fuji I), two restorative ionomers, (Ketac-fil and Fuji II), and an orthobonding resin, (System 1 +), were used. …
-
A Study Comparing Tensile Bonding Strength Values for Orthodontic Direct Bonding Resin Systems Used with Perforated Base and Wire-Mesh Base Metal Orthodontic Brackets
The direct bonding of orthodontic attachments has generated considerable enthusiasm among orthodontists. Within a relatively short period of time, a number of direct bonding resin systems and orthodontic attachments, for use in this technique, have been developed. The orthodontic practitioner may …
-
Ultra-thin silicon wafer bonding
… history and recent developments on the silicon direct bonding technique are reviewed. The growing applications of this technique in SOI, SOS and MEMS areas, difficulties and disadvantages of various bonding processes are discussed. A direct bonding procedure for attaching ultra-thin wafers less …
-
A clinical comparison of decalcification following orthodontic treatment using composite resin and reinforced modified glass ionomer cements.
… and significance: Even with the advent of direct bonding, decalcification remains a problem in orthodontics today. Glass ionomer cements have been used in dentistry for fluoride release for years and may have beneficial use in orthodontics to reduce decalcification. Purpose: This study aims …
-
Novel active waveguide devices in direct-bonded structures
… a series of experimental studies on the use of direct bonding for optical waveguide fabrication. The direct bonding technique involves contacting two ultra-clean polished surfaces to form an adhesive-free vacuum-tight bond. Optical materials bonded in this way can be formed into waveguide …
-
An in Vitro Comparative Study of Three Commonly Used Methods of Bonding Metal Orthodontic Brackets to Tooth Enamel
Three commonly used orthodontic techniques for direct bonding of metal brackets to tooth enamel were compared in this study. Each bonded bracket was stressed to failure in tension and this measurement was recorded. The bracket was then examined to determine exactly what interface failed the …
-
Effect of Different Enamel Conditioning on the Bond Strength of a Resin Modified Glass Ionomer Cement and Ceramic Brackets
The introduction of direct bonding of brackets was a major development in the quality of care provided to the orthodontic patient. Resin composites have been the standard material for direct bonding in Orthodontics for many years. However, they are sensitive to moisture contamination and do not …
-
Mikromechanische Ultraschallwandler aus Silizium
… still needed. Besides these works, an innovative direct bonding technology is also developed. This technology constitutes the basis of the bulk process. Of course, it can also be used for the packaging of other MEMS devices.
-
Bonding of Glass-to-Glass for the Development of Ultrafast Microchip Lasers
Direct glass-to-glass bonding is important for high-technology components in optics, microfluidics, and microelectromechanical systems applications. The focus of this research is on the design of an ultrafast, pulsed, microchip laser, specifically focusing on the microchip component. For this …
-
Fully Integrated Electrochemical Sensor Based on Surface Activated Copper/Polymer Bonding for Lead Detection
… interlocks. For this reason, we develop a direct bonding process for Cu/polymer. An integrated three-electrode planar configuration is then fabricated on the bonded specimen to achieve a fully-functional sensor that can detect 0.2 μg/L (0.2 ppb) Pb2+ ions from a 100 μL sample in only 30 s. …
-
Multi-Watt, diode-pumped planar waveguide lasers
… epitaxy (LPE), pulsed laser deposition (PLD) and direct bonding, were investigated. A Nd:GGG on YAG waveguide fabricated by PLD was found to have a loss <0.5dB/cm, the lowest so far reported for a PLD layer. The waveguide lased on the four-level laser transition at around 1µm and, for the first …
-
Shear Bond Strengths of Metal and Ceramic Brackets Bonded to Contemporary Porcelain Surfaces
… teeth. As a result, there arises a concern for direct-bonding techniques to porcelain restorations. Ideal adhesion to a porcelain surface should allow orthodontic treatment without bond failure, but not significantly alter porcelain integrity after debonding. Various studies have investigated …
Page 1 of 4