Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 27 for “"dislocation model"”.
-
A dislocation model of plasticity with particular application to fatigue crack closure
… growth rates. Historically, crack tip plasticity models have been based on one-dimensional rays of plasticity emanating from the crack tip, either co-linear with the crack (for the case of plane stress), or at a chosen angle in the plane of analysis (for plane strain). In this thesis, one such …
-
The Static and Dynamic Properties of Semicoherent Interfaces in Cu-Zn-Sn Alloys
… β matrix in Cu-Zn-Sn are examined using a simple dislocation model. The predicted surface energies and mobilities are compared to those observed in experiments which also assess the validity of current theories of interfacial stability in diffusion-controlled growth.</p>
-
Absorption of ultrasonic and hypersonic waves in LiF single crystals
… a mechanism for attenuation the vibrating pinned-dislocation model of Koehler is treated; a resonant peak in attenuation vs frequency was sought. Some other mechanisms, including temperature dependence, are considered. Various causes of modulation of the exponential decay of the acoustic wave are …
-
The effect of velocity and timing of residual compression in a rodent dislocation spinal cord injury model
… benefits than others from early decompression. Dislocation is the most commonly seen injury mechanism but has never been investigated with respect to residual compression in an animal model. The goal of this thesis was add residual compression to an existing rat cervical dislocation model and to …
-
A biomechanical investigation of a dislocation spinal cord injury in a rat model
… effectiveness in preclinical animal models. The most common biomechanical factors, such as cervical level, high-energy impact and dislocation injury mechanism, are not adequately represented in preclinical models, which may explain the lack of agreement between clinical studies. The …
-
Electrical resistivity measurements of deformed molybdenum crystals
… at 422°K and either diffuse together or to dislocations, and (4) This movement of the point defects does not affect the flow stress. No definite conclusion was reached on the dislocation model responsible for the results.
-
The fatigue problems of cracks subjected to obliquely incident stress waves
… loading situations, we studied the use of dislocation to represent a crack by a continuous distribution of dislocation singularities. This study focused on the configuration of finite crack located in an infinite isotropic elastic solid which is subjected to harmonic shear waves. The most …
-
GPS studies of crustal deformation in the northern Cascadia subduction zone
… data provided key constraints to elastic slip-dislocation models for estimating the size and location of the rupture area for the next subduction-thrust earthquake. Recent estimates of crustal motions within the North Cascadia Margin based on both campaign GPS network surveys and up to 6.5 …
-
Microstructural Factors of Strain Delocalization in Model Metallic Glass Matrix Composites
… crystalline and amorphous phases. This work models such a composite using shear transformation zone dynamics (a modified kinetic Monte Carlo method) for the amorphous phase, and a local Taylor dislocation model for the crystalline phase. An N-factorial experiment using the model is presented …
-
STRUCTURAL ANALYSIS OF VALLES MARINERIS, MARS
… the walls were analyzed using digital elevation models to geometrically quantify their morphology and orientation, relying on methodologies such as dip analysis, relief and curvature analysis, and attitude analysis among others. These analyses permitted the documentation of indicators of …
-
Computational modeling of the nonlinearity parameter β in steel alloys
… nano- or microscale defects. However, predictive models are needed to quantitatively link measurements of nonlinearity parameters to changes in the microstructure. One such example is the development of grain boundary carbides in austenitic stainless steels associated with an increase in measured …
-
Rupture models of the great 1700 Cascadia earthquake based on microfossil paleoseismic observations
Past earthquake rupture models used to explain paleoseismic estimates of coastal subsidence during the great AD 1700 Cascadia earthquake have assumed a uniform slip distribution along the megathrust. Here, we infer heterogeneous slip for the Cascadia margin in AD 1700 that is analogous to slip …
-
Plastic Relaxation Around Crack Tip In Composite Materials
The concept of continuously distributed dislocations is used to investigate the mechanical behavior of fractured composite materials, As a first approximation to the complicated physical configuration of a composite material, the current investigation concerns a simp1ified physical model by …
-
Implementation of a Dynamic Geodetic Datum in Papua New Guinea: A case study
… can include a geodetic velocity field, strain dislocation model and other non-secular offset data in order to maintain the integrity of the datum. A least-squares adjustment algorithm, including dynamic elements, is described and tested. This adjustment reduces geodetic measurements made in …
-
Geodetic strain measurements in central Vancouver Island
… be reproduced with a two-dimensional, elastic dislocation model of the Cascadia subduction zone by locking the shallow interface to a depth of about 20 km. The model could not account for some details of the vertical deformation and it was not consistent with the north-south compressive stress …
-
Understanding earthquake-cycle deformation around subduction zones and strike-slip faults
… Using numerical and semi-analytical modelling constrained by diverse observations, I analyze the three phases of the cycle: coseismic, postseismic, and interseismic, each being dominated by one aspect of the viscoelastic rheology. Coseismic (elasticity): Accurate modelling of seafloor …
-
Crack-Free Single-Crystalline Ultrawide Bandgap Semiconductor Film Growth on Silicon Substrate for Next-Generation Semiconductor Applications in Electronics, Sensing, Photonics, and Energy Harvesting
… mechanics and the Matthews–Blakeslee misfit-dislocation model. The analysis shows that strain-energy density increases monotonically with film thickness but can be reduced by optimized thermal conditions that enhance adatom mobility and promote relaxation. Crack-free growth is achieved when …
-
Clinically relevant mechanisms of spinal cord injury : contusion, dislocation, and distraction
… injury (SCI). Pre-clinical research typically models spinal cord transection, contusion, and compression, although in humans, other injury mechanisms such cord shearing from vertebral dislocation, and stretching from distraction occur frequently. This creates a potentially important disparity …
-
Small fatigue crack growth in high strength aluminium alloys
… of a variable friction stress into the ECS dislocation model and the calculated PZS was used to correlate small crack growth. Crack deceleration was described by blocked PZS and the recovery of the growth was expressed by the necessity of a stress concentration within the plastic zone to …
-
Modeling the Mechanical Response of Polycrystalline Thin Films
… volumes of the microstructure geometry are modeled with Voronoi diagrams. The crystallographic texture is numerically generated from real X-ray diffraction experimental data by using a texture discretization algorithm. The Young's modulus is estimated by simulating uniaxial stress tests on …
Page 1 of 2