Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 31 for “"dispersoid"”.
-
DISPERSOID STABILITY IN ION IRRADIATED OXIDE DISPERSION STRENGTHENED ALLOYS
The purpose of this study is to evaluate oxide dispersoid stability in oxidedispersoid-strengthened (ODS) alloys under different ion irradiation conditions. ODS alloys are considered as future generation IV reactor cladding and in-core structure materials due to their good swelling resistance and …
-
ANALYZING VARIATION IN DISPERSOID FORMATION IN ALUMINUM ALLOYS BY MINOR CHANGES IN HOMOGENIZATION TEMPERATURE
… low melting point phases, forms nanoscale dispersoid phases, and promotes the beta to alpha transformation of iron particles in the matrix. With ever increasing use of aluminum extrusion in the automotive industry there is a constant need for increased efficiency and consistency in …
-
Effect of homogenization on high temperature deformation behaviour of AA3xxx aluminum alloys
… practice and alloy Mn content on the dispersoid density and high temperature constitutive behaviour of AA3xxx aluminum alloys has been studied. Experimental work was conducted on three as-cast alloys with different Mn compositions: AA3102 (0.26 wt% Mn), an intermediate Mn alloy (0.75 …
-
Deciphering the role of dispersoids in dispersion-strengthened tungsten alloys on the mechanical properties and irradiation- driven response under nuclear fusion reactor-relevant conditions
… time for recovery, as a high number of tungsten-dispersoid interfaces is presented to pin grain boundaries and enhance mechanical properties. However, deuterium irradiation results in surface blistering, while the dispersoid composition and distribution in the bulk samples has been shown to …
-
Friction stir welding of high temperature alloys
… A critical finding was 'strain induced dispersoid agglomeration'. For Ti-6Al-4V alloy, transformed ß microstructure formed composed of fine acicular α phase (~500 nm in thickness). The fine grain structure facilitated globularization during tensile deformation at 625 ºC. Mechanical …
-
Origins of Embrittlement of an Al-Zn-Mg-Cu Alloy Post Additive Friction Stir Deposition
… state. Critical to this process is the role of dispersoid particles, which are modified by shear processes which provide high energy spots for thermally stable precipitate nucleation. Removal of these dispersoid particles by an alloy modification had been shown to eliminate the embrittlement …
-
Additive Friction Stir Deposition of Aerospace Al-Zn-Mg-Cu-Zr Alloys: Leveraging Processing and Metallurgical Science for Structural Repair
… as well as the influence of the zirconium dispersoid particle on quench sensitivity when applied to thicker sections. It was found that AA7050 after AFSD has significantly more quench sensitivity than traditionally processed material and through STEM, it was determined that this was due to …
-
Microstructure evolution during homogenization and its effect on the high temperature deformation behaviour in AA6082 based alloys
… particles (phase, volume fraction and size) and dispersoids (chemistry, crystal structure, size and volume fraction), ii) rationalize the mechanisms of dispersoid evolution and iii) develop a physically based constitutive law for the high temperature flow stress. The characterization of …
-
Gas atomized precursor alloy powder for oxide dispersion strengthened ferritic stainless steel
… successful formation of nano-metric Y-enriched dispersoids, as confirmed using high energy X-ray diffraction and transmission electron microscopy (TEM), equivalent to conventional ODS alloys from MA powders. The thermal stability of these Y-enriched dispersoids was evaluated using high …
-
Quantification of the Effect of Degassing on the Microstructure, Chemistry and Estimated Strength of Nanocrystalline AA5083 Powder
… dislocation annihilation, and formation of dispersoids. These changes can significantly alter the mechanical behavior of consolidated components based on their contributions to strength. In this study, cryomilled AA5083 (0.4 wt.% Mn; 4.5 wt.% Mg; minor Si, Fe, Cu, Cr, Zn, Ti; balance Al) …
-
Recovery and recrystallization kinetics of continuous and ingot cast AA5754
… effects the evolution and distribution of the dispersoid precipitates and associated change in the solid solution content, which thereby influences the softening kinetics of the continuous cast material. The present study also provides a comprehensive characterization of final recrystallized …
-
Effects of aluminum additions to gas atomized reaction synthesis produced oxide dispersion strengthened alloys
… three main components; corrosion resistance, dispersoid formation, and additional elements. A combination of Cr and Al were necessary in order to create a protective oxide in the steam atmosphere that the boiler tubing in the next generation of coal-fired power plants would be exposed to. Hf …
-
Radiation Response of Oxide Dispersion Strengthened Alloy
… (ODS) alloys introduce dispersoids in ferrite phases. However, previous studies have shown that in the absence of dispersoids, the ferrite phase is significantly less swelling resistant than the tempered martensite phase. A dual-phase 12Cr ODS alloy with improved …
-
Effects of Microstructure on Crack Initiation in AA6451 and Crack Propagation in AA3xxx
… this dissertation will explore the effects of dispersoids, a type of second phase particle, on the crack initiation and propagation behaviors. A multiscale electron microscopy-approach was employed to characterize different aspects of the microstructure and their localized deformation behavior. …
-
BULK NANOSTRUCTURED STEELS FOR NUCLEAR REACTOR AND EXTREME ENVIRONMENT APPLICATIONS
… and oxide dispersion strengthening (ODS) dispersoid free FeCrAl matrix"--Abstract, p. iv</p>
-
Nano-engineering of composite material via reactive mechanical alloying/milling (RMA/M)
… by a combination of grain size refinement and dispersoid strengthening led to a new means to synthesize such materials. This Reactive Mechanical Alloying/Milling process uses in situ reactions between the metallic powders and elements from a process control agent and/or a gaseous environment to …
-
DEVELOPMENT OF STRONGER, MORE EXTRUDABLE 6XXX SERIES ALLOYS FOR AUTOMOTIVE APPLICATIONS
… Current alloys like 6005A add Mn and Cr to form dispersoids that inhibit recrystallization and promote strengthening textures; however, high Mn and Cr concentrations reduce formability. Replacing Mn and Cr with elements that form smaller dispersoids could promote strengthening textures by …
Page 1 of 2