Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 43 for “"dispersoids"”.
-
Radiation Response of Oxide Dispersion Strengthened Alloy
… (ODS) alloys introduce dispersoids in ferrite phases. However, previous studies have shown that in the absence of dispersoids, the ferrite phase is significantly less swelling resistant than the tempered martensite phase. A dual-phase 12Cr ODS alloy with improved …
-
Deciphering the role of dispersoids in dispersion-strengthened tungsten alloys on the mechanical properties and irradiation- driven response under nuclear fusion reactor-relevant conditions
Tungsten is the material of choice for plasma-facing components in future plasma- burning fusion reactors because of its high melting point, high sputter threshold, and low hydrogenic species retention. However, tungsten is an intrinsically brittle material, displaying no room temperature ductility …
-
DEVELOPMENT OF STRONGER, MORE EXTRUDABLE 6XXX SERIES ALLOYS FOR AUTOMOTIVE APPLICATIONS
… Current alloys like 6005A add Mn and Cr to form dispersoids that inhibit recrystallization and promote strengthening textures; however, high Mn and Cr concentrations reduce formability. Replacing Mn and Cr with elements that form smaller dispersoids could promote strengthening textures by …
-
Microstructure evolution during homogenization and its effect on the high temperature deformation behaviour in AA6082 based alloys
… particles (phase, volume fraction and size) and dispersoids (chemistry, crystal structure, size and volume fraction), ii) rationalize the mechanisms of dispersoid evolution and iii) develop a physically based constitutive law for the high temperature flow stress. The characterization of …
-
Effect of homogenization on the microstructural development in a d.c. cast aa3104 aluminum alloy used for canbody stock
… a-phase, and size distribution and density of dispersoids). The homogenization process parameters were found to affect the evolving microstructure profoundly with: • An increase in heat-up rate favoring a reduction in the number of evolving dispersoids. • An increase in soak temperature …
-
Radiation Damage in Ferritic Steels Produced by Various Processing Methods
… Homogenously distributed nano-sized oxide dispersoids act as sinks for defects and help to stabilize microstructures through pinning dislocations and grain boundaries. The stability of oxide dispersoids is determined by irradiation conditions and key parameters influencing dispersoids’ …
-
A study on the texture and microstructure development in extruded AA3003 alloys and the relevant mechanical behaviour
… °C for 24 h, which produces a high density of dispersoids, and at 600 °C for 24 h, which produces a condition with almost no dispersoids. Three nearly ideal deformation modes were studied, i.e. (i) axisymmetric extension (the central region of a round bar extrusion), (ii) plane strain …
-
Microstructural evolution during the homogenization heat treatment of 6XXX and 7XXX aluminum alloys
… the extrusions, and precipitation of nano-sized dispersoids (for Cr-, Zr-, Mn-, Sc-containing alloys), which inhibit grain boundary motion to prevent recrystallization. Post-homogenization cooling reprecipitates some of the phases, changing the flow stress required for subsequent extrusion. These …
-
Development Of Nitrogen Concentration During Cryomilling Of Aluminum Composites
… Aluminum nitride and amorphous nitrogen-rich dispersoids were found in the nanocrystalline aluminum grain boundaries. Nitrogen concentration increased as a function of cryomilling time up to 72hours. A greater nitrogen concentration resulted in an enhanced thermal stability of the …
-
The effect of microstructure on strain localization in the precipitate free zone of Al-Mg-Si alloys
… it is found that non-shearable precipitates and dispersoids make the distribution of slip within the grains more uniform. It should be noted that although the addition of dispersoids increased transgranular fracture mode, but it did not affect the fracture strain in this sample. This may be due …
-
ANALYZING VARIATION IN DISPERSOID FORMATION IN ALUMINUM ALLOYS BY MINOR CHANGES IN HOMOGENIZATION TEMPERATURE
… homogenization temperature on the formation of dispersoids in 6082 alloys used in the automotive industry. The role of dispersoids is to prevent the recrystallization of grains during extrusion giving a more uniform grain structure, improved mechanical properties, and improved corrosion …
-
Gas atomized precursor alloy powder for oxide dispersion strengthened ferritic stainless steel
… successful formation of nano-metric Y-enriched dispersoids, as confirmed using high energy X-ray diffraction and transmission electron microscopy (TEM), equivalent to conventional ODS alloys from MA powders. The thermal stability of these Y-enriched dispersoids was evaluated using high …
-
IMPROVED DUCTILITY IN AN ARTIFICIALLY AGED AL-ZN-MG ALLOY WITH MN ADDITIONS
… of sub-micron sized, non-shearable, Mn-based dispersoids was added to a dense distribution of nano-sized strengthening precipitates. Model Al-Zn-Mg alloys with various additions of Mn were cast, homogenized, and fabricated into wrought sheet material that was solution heat treated and two-step …
-
Microstructure evolution during extrusion of AA3xxx aluminum alloys
… the behavior of constituent particles and dispersoids during homogenization. Back Scattered Scanning Electron Microscopy and Image Analysis with Clemex were conducted to study the evolution of the size, aspect ratio, area fraction and number density of constituent particles. Moreover, to …
-
DISPERSOID STABILITY IN ION IRRADIATED OXIDE DISPERSION STRENGTHENED ALLOYS
… alloy which has uniform distribution of oxide dispersoids in both phases was selected for this study. Previous studies on this alloy have shown good void swelling resistance after 800 peak dpa Fe ion irradiation at high temperature and have revealed equilibrium oxide dispersoid size dependency …
-
A low-temperature ageing and irradiation study on 14YWT Nanostructured Ferritic Alloys for nuclear fusion applications
… differ from conventional steels as they contain dispersoids that are distributed across its matrix. These dispersoids pin dislocations and grain boundaries, and are responsible for the superior high temperature properties associated with these alloys. However, at ≤ 475<em><sup>◦</sup>C</em>, …
-
F-TEMPER VS O-TEMPER BRAZING OF 3003 ALUMINUM RETURN BENDS
… were assessed through: Quantifying the effect of dispersoids on recrystallization Tracking bending behavior through grain morphology and surface texture Measuring the number and volume fraction of the α-Al(Mn,Fe)Si intermetallic Inducing incipient melting through high temperature thermal exposure. …
-
EFFECT OF SC ON RECRYSTALLIZATION RESISTANCE OF AA7050
… resistance. By adding Sc to AA7050, nano-sized dispersoids are formed with Sc cores and Zr shells that restrict recrystallization more than the base alloy that only utilizes Zr. Billets with varying Sc content and a control with only Zr were cast, and extrusions were made in order to compare …
Page 1 of 3