Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 15 of 15 for “"distributed winding"”.

  1. Design of an interior permanent magnet machine with concentrated windings for field weakening applications

    … permanent magnet (IPM) machine with concentrated windings (CW) for field-weakening applications. The initial phase of this work involved a feasibility study and comparison with the CW surface permanent magnet machine. Subsequently a CW-IPM machine was designed and constructed with the aim of …

    unsw Repository record for Design of an interior permanent magnet machine with concentrated windings for field weakening applications (opens in a new tab)

  2. Design of non conventional Synchronous Reluctance machine

    … minimized ripple was obtained, comparable to a distributed winding machine in this respect. This design was prototyped and tested. Mild Overlapped SyR: this study shows a new winding configuration applied to SyR and PM-SyR machines. The proposed case is in the direction to find a hybrid solution …

    poli-torino Repository record for Design of non conventional Synchronous Reluctance machine (opens in a new tab)

  3. Reliable Multiphase Induction Motor Drives

    … fault into a phase-to-phase fault is worsened in distributed winding induction motors where the different phase windings overlap each other at the end connections. Tooth wound or fractional slot concentrated winding (FSCW) stators have non-overlapping end connections and hence more physical and …

    tamu Repository record for Reliable Multiphase Induction Motor Drives (opens in a new tab)

  4. A segmented interior permanent magnet synchronous machine with wide field-weakening range

    … Surface Permanent Magnet (SPM) machine with sine distributed winding and radially-laminated Interior Permanent Magnet (IPM) machine with conventional structure has very limited or zero flux-weakening capability. The flux-weakening capability of the SPM machine can be improved by using …

    unsw Repository record for A segmented interior permanent magnet synchronous machine with wide field-weakening range (opens in a new tab)

  5. Design of the shaded-pole motor

    … motor provided with an auxiliary short-circuited winding displaced in magnetic position from the main winding. This auxilary winding (called a "shading coil") is used for producing the starting torque. The essential parts of a shaded-pole motor are the stator, carrying the main winding, the …

    ut-knoxville Repository record for Design of the shaded-pole motor (opens in a new tab)

  6. High Power Density Permanent Magnet Machines with Hollow Conductors

    … two extensive design studies on concentrated and distributed winding machines of various slot-pole combinations and different winding configurations. Extensive use if made of transient finite element analysis to both predict torque capability and copper loss which include the effect of AC losses …

    whiterose Download PDF for High Power Density Permanent Magnet Machines with Hollow Conductors (opens in a new tab)

  7. Classification and localisation of multiple partial discharge sources within high voltage transformer windings

    … tools for PD activities within HV transformer windings. In most cases, PD will occur in transformer windings due to ageing processes, operational over stressing or defects introduced during manufacture, and different PD sources have different effects on the condition and performance of power …

    soton Download PDF for Classification and localisation of multiple partial discharge sources within high voltage transformer windings (opens in a new tab)

  8. Investigation of dynamic control characteristics of a fractional-slot concentrated-winding interior permanent magnet synchronous machine

    … a 14-pole/18-slot fractional slot concentrated winding (FSCW) interior permanent magnet synchronous machine (FSCW IPMSM). The machine was run with two commonly used control techniques: Field Oriented Control (FOC) and Direct Torque and Flux Control (DTFC). The FSCW IPMSM under consideration was …

    unsw Repository record for Investigation of dynamic control characteristics of a fractional-slot concentrated-winding interior permanent magnet synchronous machine (opens in a new tab)

  9. A Concentrated Wound Interior Permanent Magnet Machine for Direct-Drive Wind Turbine Applications

    … permanent magnet machine with concentrated windings for direct-drive wind turbine applications. The initial phase of this work investigates and compares the performances of the interior PM synchronous machine with fractional-slot concentrated winding and the distributed winding in stators …

    unsw Repository record for A Concentrated Wound Interior Permanent Magnet Machine for Direct-Drive Wind Turbine Applications (opens in a new tab)

  10. Fractional Slot Concentrated Winding Interior Permanent Magnet Machines with Reluctance Torque: Inductance-Based Methodology for Comprehensive Analysis, Design, and Control

    … and control of fractional slot concentrated winding (FSCW) interior permanent magnet (IPM) machines. The properties of FSCW are studied analytically based on the modified winding function method, which is developed based on turns function. The modified winding function method simplifies the …

    mcmaster Repository record for Fractional Slot Concentrated Winding Interior Permanent Magnet Machines with Reluctance Torque: Inductance-Based Methodology for Comprehensive Analysis, Design, and Control (opens in a new tab)

  11. Modeling of Teeth Forces in Electrical Machines - A Comparison between different types of machines

    … are closely related to pole–slot combinations, winding configurations, and structural characteristics of the machine. This thesis investigates permanent-magnet synchronous machines (PMSMs) with different pole–slot configurations, focusing on the characteristics of electromagnetic (EM) forces and …

    chalmers Repository record for Modeling of Teeth Forces in Electrical Machines - A Comparison between different types of machines (opens in a new tab)

  12. Electrified Vehicle Traction Machine Design With Manufacturing Considerations

    … application. Different rotor topologies design, winding design, and multiphase designs are investigated and discussed. The Nissan Leaf interior permanent magnet (IPM) traction machine has been widely analyzed and there is much public domain data available for the machine. Hence, this machine is …

    mcmaster Repository record for Electrified Vehicle Traction Machine Design With Manufacturing Considerations (opens in a new tab)

  13. Multiphysics Design Optimisation and Analysis of a High-speed (100,000 RPM) Interior Permanent Magnet Machine

    … the prototype high-speed IPMSM. The conventional distributed winding is selected because it allows reduced rotor core loss at high speeds. The feasibility of applying the conventional IPMSM rotor topologies such as the flat-, V-, and spoke-types in the target design was analysed thoroughly using …

    unsw Repository record for Multiphysics Design Optimisation and Analysis of a High-speed (100,000 RPM) Interior Permanent Magnet Machine (opens in a new tab)

  14. Constant-Flux Inductor with Enclosed-Winding Geometry for Improved Energy Density

    … cells of magnetic material and distributing the windings properly can successfully make the flux density distribution uniform and thus significantly improve the power density. Compared with a conventional toroidal inductor, the constant-flux inductor introduced herein has an enclosed-winding …

    vt Repository record for Constant-Flux Inductor with Enclosed-Winding Geometry for Improved Energy Density (opens in a new tab)