Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 108 for “"doubler"”.

  1. Microwave Frequency Doubler Integrated with Miniaturized Planar Antennas

    … harmonic re-radiator, consisting of a diode doubler and conjugate-matched receive and transmit antennas, is described. Diode-based frequency multipliers and rectifiers, coupled with antennas, are of interest for quasi-optical applications, for energy-scavenging and for sensing applications. …

    usf Repository record for Microwave Frequency Doubler Integrated with Miniaturized Planar Antennas (opens in a new tab)

  2. Switched-Capacitor Voltage Doubler Design Using 0.5 μm Technology

    … investigate one of the most famous SC voltage doubler topologies, which is known as "Favrat Cell". By designing a chip, which converts 1.5 V voltage input to 2.5 V voltage output at 1 mA current load, we will walk through the details of a SC DC-DC converter design, including the switch cell, …

    rit Repository record for Switched-Capacitor Voltage Doubler Design Using 0.5 μm Technology (opens in a new tab)

  3. Preliminary analysis of doubler plate attachment details for steel moment resisting frames

    … This is normally accomplished by welding doubler plates to the column in the panel zone region. Doubler plates can be a costly feature in steel moment resisting frames because of the substantial amount of welding involved. There has been a large amount of past research that has …

    texas Repository record for Preliminary analysis of doubler plate attachment details for steel moment resisting frames (opens in a new tab)

  4. Digital Control Of Half-Bridge Dc-Dc Converters With Current Doubler Rectification

    … necessary to derive a valid model. The current doubler rectified half bridge (CDRHB) DC-DC converter is suitable for high current low voltage applications. In this thesis, the topology operations are analyzed and then the unified state space model, analog small signal model and digital small …

    ucf Repository record for Digital Control Of Half-Bridge Dc-Dc Converters With Current Doubler Rectification (opens in a new tab)

  5. Cyclic loading analysis of doubler plate attachment details for steel moment resisting frames

    … high shear forces during earthquake loading. Doubler plates are often used to increase the stiffness and strength of the panel zone. The methods and details used to attach doubler plates to columns can affect seismic performance of the panel zone and can also affect cost. The research reported …

    texas Repository record for Cyclic loading analysis of doubler plate attachment details for steel moment resisting frames (opens in a new tab)

  6. Modelling and characterisation of a broadband 85/170 GHz Schottky varactor frequency doubler

    In this thesis, a frequency doubler is designed to produce a broadband local oscillator signal (LO) around 200 GHz. A linear array of four Schottky varactors are incorporated into a GaAs flip-chip in a balanced anti-series configuration [1], so as to generate the second harmonic of the incoming …

    chalmers Repository record for Modelling and characterisation of a broadband 85/170 GHz Schottky varactor frequency doubler (opens in a new tab)

  7. Finite element analysis of welds attaching short doubler plates in steel moment resisting frames

    … investigated various options for attaching doubler plates to the column at beam-column joints in SMF for purpose of increasing the shear strength of the panel zone. This previous work was primarily focused on doubler plates that extend beyond the top and bottom of the attached beams, and …

    texas Repository record for Finite element analysis of welds attaching short doubler plates in steel moment resisting frames (opens in a new tab)

  8. Finite element analysis of steel moment frame joints with doubler plates and continuity plates

    … between continuity plates and extended doubler plates. Several recent studies have examined this same issue, but utilized a simplified finite element model of the panel zone region that did not include a complete representation of the beams attached to the column.. The previous studies …

    texas Repository record for Finite element analysis of steel moment frame joints with doubler plates and continuity plates (opens in a new tab)

  9. Breaking the Doubler Barrier: Using Sy Brandon’sDivertissement to Demonstrate a Practical Approach to Performing Multiple WoodwindWorks

    … multiple woodwind players, band directors, and doublers become familiar with and overcome these common pitfalls. Sy Brandon’s Divertissement provides an outstanding platform to address problems and provide solutions for multiple wind players, band directors, and doublers. This dissertation …

    unt Repository record for Breaking the Doubler Barrier: Using Sy Brandon’sDivertissement to Demonstrate a Practical Approach to Performing Multiple WoodwindWorks (opens in a new tab)

  10. Finite element analysis of doubler plate attachment details and load paths in continuity plates for steel moment frames

    … behavior of column panel zones reinforced with doubler plates in seismic resistant steel moment frames. A primary goal of the research was to develop data to support the development of improved design guidelines for welding doubler plates to columns, with and without the presence of continuity …

    texas Repository record for Finite element analysis of doubler plate attachment details and load paths in continuity plates for steel moment frames (opens in a new tab)

  11. Analysis and design of 3 stage voltage rectifier multiplier and 2 stage multi-phase voltage doubler for and energy harvesting system

    The reliability and the efficiency of the wireless link between the TX/RX for wireless sensors devices depends on the environmental conditions such as change in the physical distance or changes in the orientation between transmitter and receiver. So the need arises to monitor and the ability to …

    ttu Repository record for Analysis and design of 3 stage voltage rectifier multiplier and 2 stage multi-phase voltage doubler for and energy harvesting system (opens in a new tab)

  12. Energy Efficency Investigation of a 3kW DC/DC Converter for Electric Vehicle Applications using Full Wave and Current Doubler Synchronous Rectification

    … wave rectification and full bridge with current doubler synchronous recti fication. The idea is that the converter topologies should be implemented in Allegro AMS and a loss calculation script should be written in Matlab. It should be possible to simulate and study the converters' performance in …

    chalmers Repository record for Energy Efficency Investigation of a 3kW DC/DC Converter for Electric Vehicle Applications using Full Wave and Current Doubler Synchronous Rectification (opens in a new tab)

  13. Stress intensity factors for ship and offshore structural details

    … on the evaluation the weld root cracking for doubler-plate reinforced joints. Evaluation of stress intensity factor by finite element method has been calibrated against reported numerical and experimental results. For the purpose of standardized and simplified crack mesh generation, an …

    nus Repository record for Stress intensity factors for ship and offshore structural details (opens in a new tab) Download file for Stress intensity factors for ship and offshore structural details (opens in a new tab)

  14. Measurement of Ribozyme Cleavage Reaction Using Toehold Mediated Strand Displacement; Design, Validation and Possible Applications

    … from the cleavage. Secondly, we developed doubler HHRs that cleave twice upon induction with a single input strand (ssDNA/ssRNA). Outputs can be heterogeneous (Hetero doubler) or identical (Homo doubler). Homo doublers were designed to work as amplifying components in RNA amplifiers. We …

    concordia Download PDF for Measurement of Ribozyme Cleavage Reaction Using Toehold Mediated Strand Displacement; Design, Validation and Possible Applications (opens in a new tab)

  15. FINITE ELEMENT ANALYSIS OF STEEL WELDED COVERPLATE INCLUDING COMPOSITE DOUBLERS

    … solutions includes the application of composite doublers over the critical weld. In order to establish an effective finite element analysis, models were created using ABAQUS (2007). Models were created to properly represent physical testing being done parallel to this study. These models …

    ku Repository record for FINITE ELEMENT ANALYSIS OF STEEL WELDED COVERPLATE INCLUDING COMPOSITE DOUBLERS (opens in a new tab)

  16. Analysis, Design, and Implementation of Integrated Charge Pumps with High Performance

    … show that the Dickson charge pump (voltage doubler) is the best structure for integration. Therefore, techniques to improve per- formance and conversion efficiency of integrated voltage doubler are proposed. Switch bootstrapping technique prevents short-circuit losses, improves driving …

    guelph Repository record for Analysis, Design, and Implementation of Integrated Charge Pumps with High Performance (opens in a new tab)

  17. Circuit Design Techniques For Wideband Phased Arrays

    … a differential current reuse frequency doubler for area and power savings has been proposed. Silicon measurement results are provided for the frequency domain solution (IBM 65nm RF CMOS), injection locked oscillator model verification (IBM 130nm RF-CMOS) and frequency doubler (IBM 65nm …

    umn Repository record for Circuit Design Techniques For Wideband Phased Arrays (opens in a new tab)

Page 1 of 6