Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 55 for “"drag model"”.
-
Stress–Based Torque and Drag Model
The models used currently in industry have shown a considerable discrepancy between theoretical data and actual data observed in the field. The birth of torque and drag (T&D) modeling was in 1984 in Exxon Production Research Company, and was published by C.A Johancsik. It provided the first …
-
Application of Euler-Bernoulli finite element methods for torque and drag model verification
… of real time data measurements. Torque and drag are two of the most important parameters that are monitored continuously throughout any oil and gas drilling operations. Where torque is defined as the force of rotation between the drill pipe and the wellbore wall and drag is defined as the …
-
On The Modeling Of The Hydrodynamic Force Acting On A Spherical Particle
A new model of the hydrodynamic force acting on a particle under an oscillating viscous fluid flow, at finite Reynolds and Strouhal numbers in the range of 0.01 to 25 is developed. This drag model is based on the novel concept of variable-order calculus, where the order of derivative can vary with …
-
Real-time Aerodynamic Modeling and Control of Optimum Power-Off Glide Performance During Emergency Forced Landings
… changes, update aerodynamic performance models, and predict glide performance by creating a Kalman filter-based real-time drag model. This research utilizes theoretical modeling, system identification, and T-38 flight-test data. The framework implements a three-variable drag model, which …
-
Modeling Two-Phase Flow in the Downcomer of a Once-Through Steam Generator using RELAP5/MOD2
… purpose of this study is to develop an accurate model of the downcomer of the once-through steam generator (OTSG) developed by Babcock & Wilcox, using RELAP5/MOD2. While the physical model can be easily developed, several parameters are left to be adjusted to optimally model the downcomer and …
-
Trade-off study for the hit-to-kill interception of ballistic missiles in the boost phase
… guidance algorithm. A literature review of the drag model used in the algorithm and comparison of the new guidance with the compensated PN guidance was also conducted. A new induced drag model was developed for future studies. The results verified that the trajectory-shaping guidance is feasible …
-
Goddard-problem variants
… Control theory. For strict assumptions on the drag law and the thrust, solutions were found, even in a closed, analytic form. Nevertheless, for more realistic conditions, the problem becomes a very complex one, and the solution is far from complete. In addition to this, complexity increases if …
-
Predictive computational tools for biomass fast pyrolysis in fluidized-bed reactors using particle-resolved direct numerical simulation of reacting gas-solid flow
<p>By implementing interphase sub-models obtained form particle-resolved direct numerical simulation(PR-DNS), a new computer fluid dynamics(CFD) two-fluid model for gas-solid reacting system can be established and may well improve the predictive ability. We proved the validity of applying PR-DNS …
-
Testing geologic and geometric effects on drilling operations using torque and drag models
… geologic and geometric effects on torque and drag should be significant. But literature suggests otherwise. Lesage et al. (1988) wrote that friction coefficients are not affected by lithology and hole angle, among other things. And if friction coefficients are similar for all of these factors, …
-
Atomistically informed phase field simulations for grain growth and phase transformation
… of solutes and/or impurities due to solute drag. Quantifying the solute drag requires expensive and time-consuming experimental trials, which are further limited due to the vastly different length scales of solute segregation (few nm) and microstructural features such as grain sizes (few …
-
Deriving Atmospheric Density Estimates Using Satellite Precision Orbit Ephemerides
Current atmospheric models are incapable of properly modeling all of the density variations in the Earth’s upper atmosphere. Precision orbit ephemerides (POE) are utilized in an orbit determination process to generate improved atmospheric density estimates. Based on their correlation to …
-
Multiphase Computational Fluid Dynamics Modelling of Gas Liquid Separation in an Ebullated Bed Hydroprocessor
… built a multiphase computational fluid dynamics model for the gas-liquid separator in an ebullated bed hydroprocessor. The k-ω Shear Stress Transport turbulence model in conjunction with the Tomiyama slightly contaminated drag model were used to investigate gas-liquid separation efficiency. …
-
Numerical Modeling of Air-Water Flows in Bubble Columns and Airlift Reactors
Bubble columns and airlift reactors were modeled numerically to better understand the hydrodynamics and analyze the mixing characteristics for each configuration. An Eulerian-Eulerian approach was used to model air as the dispersed phase within a continuous phase of water using the commercial …
-
Analysis of gas-solid flow using particle-resolved direct numerical simulation: flow physics and modeling
… gas-solid flows, and to propose accurate closure models for computational fluid dynamics (CFD) simulations using the averaged conservation equations, there are several challenges in gas-solid flows that yet need to be addressed. In many of the industrial processes, the solid-to-fluid density ratio …
-
MODELING AND SIMULATION OF AIR BLAST EFFECTS
… with the equations of projectile motion under drag and gravity. Its trajectory predictions for a spherical fragment in still air showed significant difference with a 4th order Runge-Kutta (RK4) implementation of the equations of motion. The latter has been validated with literature results …
-
Passive drag sail applications for the accelerated deorbit and targeted reentry of spacecraft
… One such proposed method is aerodynamic drag sails to accelerate the natural deorbit process caused by the high-altitude atmosphere. The method, properly implemented, could cause the spacecraft to reenter the atmosphere and burn up without requiring the planning of additional maneuvers, …
-
Modeling of Gas Release from an Underground Pipeline
… to the atmosphere is necessary for consequence modeling, in order to have the best possible prevention and mitigation barriers. Depending on the conditions, the gas flow regime can be divided into three categories: diffusion, fluidization, and crater formation. The main objective of this project …
-
Impact of Fluids Distribution System on Bubble Column Hydrodynamics
… and dynamics and incorporate a distributor sub-model into an existing fluid dynamics model of the industrial hydroprocessor. The size of initial bubbles formed in the plenum chamber was found to have negligible impact on phase holdups above the distributor. However, resulting bubble properties …
-
Magnetic attitude control of LAICE satellite with aerodynamic stabilization
… the development of an efficient graphical drag model for computing aerodynamic torques; and the novel use of a tri-axial Helmholtz cage for performing a Hardware-in-Loop optimization of the coupled attitude determination and control system.
Page 1 of 3