Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 9 of 9 for “"drained strength"”.

  1. Shear strength of coal combustion product by vane shear

    … of this study was to evaluate the shear strength of a coal combustion product (CCP) using the vane shear test. The CCP was obtained from a CCP evaporation pond in the Eastern United States, and consisted primarily of silt-sized particles. A series of small-scale vane shear (diameter = …

    colostate Repository record for Shear strength of coal combustion product by vane shear (opens in a new tab)

  2. Strength of Stabilised Soil - A Laboratory Study on Clays and Organic Soils Stabilised with different Types of Binder

    … is a need for more extensive research on the undrained and drained strength properties and behaviour of soils stabilised with various types of binders. The overall objective of the study presented in this thesis was to improve the understanding of some of the important aspects of the strength …

    lund Repository record for Strength of Stabilised Soil - A Laboratory Study on Clays and Organic Soils Stabilised with different Types of Binder (opens in a new tab) Download PDF for Strength of Stabilised Soil - A Laboratory Study on Clays and Organic Soils Stabilised with different Types of Binder (opens in a new tab)

  3. The UBC ring shear device

    … practical apparatus for determining the residual strength of clay soils. To provide background for the study, current knowledge regarding residual strength is reviewed, including the following points. 1. Residual strength, defined as the lowest drained strength a soil can exhibit, is attained at …

    ubc Repository record for The UBC ring shear device (opens in a new tab) Download PDF for The UBC ring shear device (opens in a new tab)

  4. Shear strength of flue gas desulfurization by-product

    … OF MISSOURI AT AUTHOR'S REQUEST.] Shear strength parameters of flue gas desulfurization (FGD) sludge were investigated by conducting a series of constant volume direct simple shear tests on FGD specimens compacted using standard Proctor energy. Compacted FGD specimens were consolidated to …

    missouri Repository record for Shear strength of flue gas desulfurization by-product (opens in a new tab)

  5. An experimental study of hydraulic fracture and erosion

    … results suggest that hydraulic fracturing for undrained conditions occurs when the drained strength of the soil element at the edge of a borehole is reached. For fully drained conditions, fracturing occurs when the soil element at the edge of the borehole reaches the no-tension cut-off. A new …

    city-london Download PDF for An experimental study of hydraulic fracture and erosion (opens in a new tab)

  6. Effect of particle cementation on the stifness of uniform sand as measured with stress wave velocities

    … contact appears to be preserved. Seismic and drained strength measurements on Hickory sand specimens were obtained from different cement concentrations and compared with results from clean sand specimens. Among the findings of this investigation are: (1) the procedure to artificially cement …

    texas Repository record for Effect of particle cementation on the stifness of uniform sand as measured with stress wave velocities (opens in a new tab)

  7. The performance of diaphragm type cellular cofferdams

    … the lowest factor of safety based on the drained strength of the clay on which the cofferdam was constructed. The water level within the river was increased to accommodate flooding and soil strength was reduced to identify the general failure mechanism. The structural forces were …

    soton Download PDF for The performance of diaphragm type cellular cofferdams (opens in a new tab)

  8. Triaxial compression tests on an undisturbed sensitive clay

    … The stress-strain characteristics of both drained and undrained triaxial tests are considered. The drained and undrained shear strengths are compared for both the maximum principal stress difference and the maximum effective principal stress ratio failure criteria. An attempt is made to …

    ubc Repository record for Triaxial compression tests on an undisturbed sensitive clay (opens in a new tab) Download PDF for Triaxial compression tests on an undisturbed sensitive clay (opens in a new tab)

  9. Use and Measurement of Fully Softened Shear Strength

    The fully softened shear strength was defined by Skempton (1970) as the peak drained shear strength of a clay in a normally consolidated state. All the experience available on the applicability of the fully softened shear strength for slopes is based on back-analyses. Back-analyses of first-time …

    vt Repository record for Use and Measurement of Fully Softened Shear Strength (opens in a new tab)