Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 78 for “"drop formation"”.

  1. Drop formation from particulate suspensions

    … research presents an experimental study of the formation of drops of suspensions consisting of a viscous liquid and spherical, neutrally buoyant, noncolloidal particles. Pendant drop formation and low Reynolds number jetting of suspensions are investigated, as is the transition between the two. …

    gatech Repository record for Drop formation from particulate suspensions (opens in a new tab)

  2. Drop-on-Demand Inkjet Drop Formation and Deposition

    An imaging system was developed to visualize Drop-on-Demand (DOD) inkjet drop formation and impaction on substrate over drop sizes and impaction speeds of the magnitudes encountered in applications of inkjet printing. Using a pulsed laser, a low-speed charge-coupled-device (CCD) camera, and signal …

    gatech Repository record for Drop-on-Demand Inkjet Drop Formation and Deposition (opens in a new tab)

  3. Drop-on-demand inkjet drop formation of dilute polymer solutions

    … in this dissertation was conducted to understand drop formation of inkjet printing with inks containing polymer. Solutions containing a water soluble polymer, poly ethylene oxide (PEO), with different molecular weights and polydispersities were used as inks. A flash photographic technique was used …

    gatech Repository record for Drop-on-demand inkjet drop formation of dilute polymer solutions (opens in a new tab)

  4. Analysis and Computational Modelling of Drop Formation for Piezo-Actuated DOD Micro-Dispenser

    Drop-on-demand micro-dispenser has been dramatically used in inkjet printing rapid prototyping applications. To predict the drop size, its velocity and shape evolution, it is necessary to understand the drop formation process. In this thesis, an analytical method is used to analyze the oscillatory …

    nus Repository record for Analysis and Computational Modelling of Drop Formation for Piezo-Actuated DOD Micro-Dispenser (opens in a new tab) Download file for Analysis and Computational Modelling of Drop Formation for Piezo-Actuated DOD Micro-Dispenser (opens in a new tab)

  5. Effect of Thickener and Lowered Air Density on Spray Drop Formation and Evaporation Rate

    Made available in DSpace on 2014-12-11T17:36:09Z (GMT). No. of bitstreams: 1 7412264.pdf: 4133007 bytes, checksum: b96bab0caceb0a58387759b575e3a79c (MD5) Previous issue date: 1973

    uiuc Repository record for Effect of Thickener and Lowered Air Density on Spray Drop Formation and Evaporation Rate (opens in a new tab)

  6. Two phase flow drop formation in StarJet system: simulations for molten metal and development of superhydrophobic nozzle for aqueous liquids dosage

    … in this work is capable of generating micro drops from nano- to picoliter range from liquid metal. The system includes a single or multiple heaters which sustain the liquid phase of molten metals in the reservoir and is subsequently actuated pneumatically. Applying an appropriately adjusted …

    freiburg-diss Repository record for Two phase flow drop formation in StarJet system: simulations for molten metal and development of superhydrophobic nozzle for aqueous liquids dosage (opens in a new tab)

  7. Hydrodynamics of drop formation in liquid-liquid systems: investigation and interpretation of drop sizes in liquid-liquid systems as a function of nozzle diameter, nozzle velocity and physical properties of the systems

    Drop formation processes from a nozzle of diameter 0.0602 cm in immiscible liquids were investigated experimentally and theoretically. Experimental data for drop sizes in prejetting and jetting regimes were obtained. In the prejetting conditions for water into decane system, data for drop formation …

    the-open-u Download PDF for Hydrodynamics of drop formation in liquid-liquid systems: investigation and interpretation of drop sizes in liquid-liquid systems as a function of nozzle diameter, nozzle velocity and physical properties of the systems (opens in a new tab)

  8. Drop-on-demand inkjet deposition of complex fluid on textiles

    … method. The rheological properties and DOD drop formation dynamics of carbon black pigmented inkjet inks were investigated. It was found that the suspension microstructure responses to bulk motions, leading to shear rate and time dependent shear viscosity. However, DOD drop formation …

    gatech Repository record for Drop-on-demand inkjet deposition of complex fluid on textiles (opens in a new tab)

  9. Controlled Manipulation of Droplets on Fibers: Fundamentals and Printing Applications

    In this dissertation, the drop interactions with a single fiber is discussed under an application angle for the development on new Drop-on-Demand (DOD) printhead using a fiber-in-a-tube platform[1] to print highly viscous materials[2]. To control the drop formation and manipulation on fiber, one …

    clemson Repository record for Controlled Manipulation of Droplets on Fibers: Fundamentals and Printing Applications (opens in a new tab)

  10. Simulations of interfacial dynamics of complex fluids using diffuse interface method with adaptive meshing

    … The numerical simulations of monodisperse drop formation in microfluidic devices have reproduced scenarios of jet breakup and drop formation observed in experiments. Parametric studies have shown dripping and jetting regimes for increasing flow rates, and elucidated the effects of flow and …

    ubc Repository record for Simulations of interfacial dynamics of complex fluids using diffuse interface method with adaptive meshing (opens in a new tab) Download PDF for Simulations of interfacial dynamics of complex fluids using diffuse interface method with adaptive meshing (opens in a new tab)

  11. Microfluidic Emulsification

    … In an attempt to understand the dynamics of drop formation in flow-focusing microfluidic channels, especially for an explanation of a transition from unique drop size to bimodal oscillating drop sizes as observed in the experiments, numerical simulation is developed to use the …

    tamu Repository record for Microfluidic Emulsification (opens in a new tab)

  12. Development and Characterization of Multi-Material Printing of the Drop-on-Demand (DoD) System

    … multi-material product through means of Drop on Demand (DoD) dispensing, using different type of print heads with different methods of actuation within a single dispensing system. Other than compatibility issues and the necessary modifications to the hardware and software of an original …

    nus Repository record for Development and Characterization of Multi-Material Printing of the Drop-on-Demand (DoD) System (opens in a new tab) Download file for Development and Characterization of Multi-Material Printing of the Drop-on-Demand (DoD) System (opens in a new tab)

  13. Prediction of drop sizes in liquid/air systems

    … air in various flow rates to determine drop sizes. About four hundred data points were collected to predict drop sizes from the physical properties of liquids and flow rates. A hypothesis is presented which accounts for the effect of inertial mass on drop formation. With this hypo­ …

    missouri Repository record for Prediction of drop sizes in liquid/air systems (opens in a new tab)

  14. Drop Sizes in a Reciprocated Plate Extraction Column

    <p> Drop sizes were measured photographically for water in kerosene and for water in methyl isobutyl ketone, at varying flow rates and levels of agitation. At high levels of agitation the data could be represented very approximately by the well known relationship of Hinze and others: d32= …

    mcmaster Repository record for Drop Sizes in a Reciprocated Plate Extraction Column (opens in a new tab)

  15. Spray generation

    … experimental investigation of the ligaments and drops generated at the free surface of liquid wall jets and liquid axisymmetric jets flowing over sand and polystyrene (beads) roughed surfaces. Experiments were conducted with freshwater and Eulerian and Lagrangian methods of description were used …

    nps Repository record for Spray generation (opens in a new tab)

  16. Spray generation from free and half-free jets

    … experimental investigation of the ligament and drop formation at the free surface of wall jets, flowing over sand-roughened plates, and on unbounded two-dimensional jets, discharging into atmosphere. Experiments were conducted with both fresh and simulated sea water. Measurements were made with …

    nps Repository record for Spray generation from free and half-free jets (opens in a new tab)

Page 1 of 4