Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 11 of 11 for “"drop-weight testing"”.
-
The effect of strain rate upon the morphology of high purity 26 per cent chromium-1 percent molybdenum ferritic stainless steel tubing
… to results obtained from impact-flattening drop weight testing on similar material and section size. The results showed that some tubular sections which exhibited completely ductile behavior at impact-flattening strain rates are subject to brittle characteristics when explosively impulse …
-
Experimental evaluation of laminated glass interlayer under high strain rates
… alone and laminated glass sheets using impact drop-weight testing. Virgin PVB as well as UVEKOL-S sheets extracted from laminated glass panels will evaluated in this study. The results of this study are expected to enhance the engineering design methods and numerical modeling of laminated glass …
-
Mechanical properties and impact resistance of steel fiber reinforced lightweight aggregate concrete
… of both plain and fiber-reinforced lightweight aggregate concrete. Effects of coarse and fine lightweight aggregates, silica fume, and steel fibers are studied and discussed. The results are also compared with those of normal weight concrete. The impact resistance of the concrete was …
-
Fluid structure interaction effect on sandwich composite structures
… conditions. Using a uniquely designed vertical drop-weight testing machine, there were three fluid conditions in which these experiments focused. The first of these conditions was completely dry (or air) surrounded testing. The second condition was completely water submerged. The final condition …
-
Simulation of low-velocity impact damage in sandwich composites
… out through low-velocity impact tests (using drop-weight testing machine) and damage calibration tests (using X-radiography, Ultrasonics and optical microscopy of polished cross-sections). Good agreements were obtained between experiments and predictions not only in terms of structural …
-
An experimental study of fluid structure interaction of carbon composites under low velocity impact
… water surroundings. In this study, experimental testing was carried out to investigate FSI of composite laminates immersed in fluid and subjected to low-velocity impact. Square composite laminates of carbon fiber weave and vinyl ester resin of size 305 mm and 2.38 mm nominal thickness were …
-
On the axial crushing and failure of aluminum alloy tubes : experiments and numerical simulations
The use of aluminum alloys for light-weighting purposes in energy absorbing components of automobiles is hindered by the relatively low ductility and more complicated constitutive behavior of these alloys. This study presents results from series of quasi-static and dynamic axial crushing …
-
Tensile behavior of concrete and mortar under direct impact tensile load
… a standard test set-up for direct tensile testing of cementitious composites. to study the tensile behavior of mortar and concrete under direct impact tensile load. to develop a simplified formula to predict the behavior of mortar and concrete under direct tensile impact loading. A unique …
-
Experimental evaluation of laminated glass interlayer polymers at various strain rates and temperatures
… glass windows subjected to dynamic loading. A drop weight testing apparatus was used in this research for evaluating PVB and SG samples under various loading rates and at different temperature ranges. Quasi-static testing of the materials was performed using a servo hydraulic testing machine in …
-
Návrh a vývoj zařízení pro dynamické zkoušky materiálů při vysokých rychlostech deformace
Diplomová práce se zabývá návrhem a konstrukcí zkušebního zařízení typu padostroj určeného pro dynamické zkoušky. V teoretické části je proveden rozbor dynamických účinků a přehled zkušebních metod určených pro střední a vysoké rychlosti deformace. Praktická část je soustředěna na konstrukční návrh …
-
Úprava zařízení pro nárazové zkoušky leteckých konstrukcí
Táto práca sa zameriava na návrh mechanického systému, ktorý eliminuje opakovaný dopad vozíka po náraze pri pádových skúškach. Cieľom je zvýšiť presnosť merania absorbovanej energie a zabezpečiť bezpečnosť testovacieho zariadenia. Navrhnutý bol blokovací mechanizmus aktivovaný predpätou pružinou, …