Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 189 for “"dry etching"”.
-
Dry Etching Technology in VLSI
In recent years dry etching technology of semiconductor materials has received increasing attention because of the fine-line etching requirement of VLSI and very very large scale integrated (VVLSI) circuits. Dry etching provides both selectivity and anisotropy, both of which can be optimized by the …
-
Dry etching processes for ferroelectric capacitors
Dry etching processes for patterning of ferroelectric thin films using environmental benign etching gases was developed. The PbZr<sub>x</sub>Ti<sub>1-x</sub>O3 (PZT) and RuO<sub>2</sub> films were patterned using CHCIFCF<sub>3</sub> and O<sub>2</sub>. Selective etching between PZT and …
-
Block Copolymer Self-assembly and Graphene Dry Etching
… based on RIE process using oxygen plasma. The etching process was preformed on multi and single layer graphene prepared by (CVD). Raman spectrometer was used to characterize the samples before and after RIE process. The number of layers was identified form Raman spectrum by calculating the …
-
Mesoscale Modelling of Dry Etching in Block Copolymer Lithography
… substrate. This is usually achieved through dry etching, which has been the focus of this thesis. The etching process is difficult to study experimentally, considering the limitations of imaging techniques. Hence, we have developed a coarse-grained model to study the etching of block …
-
Characterisation of Dry Etching Damage in III-V and II-VI Semiconductors
Dry etching induced surface damage has been characterised, in a novel way, for thin n+ GaAs epitaxial layers, by measuring the surface conductance using the Transmission Line Model (TLM) technique and Hall measurements. Various dry etching processes have been investigated for example, rf Reactive …
-
Characterization of Dry Etching Processes of III-V Semiconductors in Silicon Tetrachloride Plasmas
… concerned with the development of Reactive Ion Etching (RIE) processes for GaAs/AlGaAs material system in Silicon Tetrachloride (SiCl4) and mixed wSilicon Tetrachloride and Silicon Tetrafluoride (SiCl4/SiF4) plasmas. Etch processes which etch GaAs and not AlGaAs (selective) and ones etch both …
-
Silicon dry etching using fluorine-based gas for nanoscale cone and grating structure fabrication
Dry etching technique is widely used in creating high aspect ratio nanostructures currently. This pattern transfer process has better performance in the profile controlling compared with wet etching technique. For the plasma etching, fluorine-based plasmas are mainly used for rapid isotropic …
-
An Investigation into the Effects of Dry Etching Techniques on Changing Halftone Dot-Sizes
… this research was to investigate the effects of dry etching techniques on changing halftone dotsizes. Dry etching, or photographic color correction, has emerged in recent years as an alternative to traditional dot etching for making local corrections to color separation halftones. This study …
-
Optimization of Dry Etching Processes and Characterization of Optical Properties on Photonic Crystal Laser with Circular Resonator
Xiuyu Zhang, Takafumi Hino, Satoshi Kasamatsu, Shobu Suga, Elbert He, Yifan Xiong, Masato Morifuji, Hirotake Kajii, Akihiro Maruta, and Masahiko Kondow: “1.3μm lasing of circular defect cavity photonic crystal laser with an AlOx cladding layer”, IEICE Electronics Express 14, 18 (2017)
-
In-situ control and monitoring of wet and dry etching of patterned semiconductors using real time spectroscopic ellipsometry
… determined using RTSE without interrupting the etching. Bulk GaAs wafers patterned with the same patterns were etched in a citric acid solution while RTSE data were simultaneously analyzed for etch depth. Final etch depth measured by SEM was always within 5% of the target depth (1μm or 1.6 μm) …
-
Micromachining for high density neural electrode arrays: a process development for dry etching polydimethylsiloxane and it’s in vitro electro-chemical behaviour and biological response
… and surface micromachining. A reactive ion etching process was developed using sulphur hexafluoride (SF6) and oxygen (O2) plasma to pattern microstructures in medical grade polydimethylsiloxane (PDMS), to allow the transfer of current between the Pt conductor and neural tissue. The process …
-
Fabrication and characterization of InP semiconductor ring lasers
… racetrack resonator lasers (SRLs) via wet etching techniques. The method of choice for SRL fabrication is reported to be via dry etching. Dry etching is a complex, time consuming and expensive process which leaves relatively rougher surfaces and sidewalls compared to wet etching techniques. …
-
Fabrication of Nanoscale Josephson Junctions and Superconducting Quantum Interference Devices
… by using electron beam patterning and physical dry etching of YBCO thin films on STO substrates. YBCO thin films were deposited using RF magnetron sputtering technique in the mixture of Ar and O2 gases and followed by annealing at high temperatures in O2 atmosphere. Structural characterization …
-
BETA-GALLIUM OXIDE LATERAL FIELD-EFFECT TRANSISTORS: FABRICATION AND PERFORMANCE
… shown in this research. Besides, the ?-Ga2O3 fin dry etching has been studied to optimize the FinFET performance. Factors impacting the fin waist narrowing, including the thermal paste, in fin waist narrowing of ?-Ga2O3 dry etching were discussed for the first time.
-
Study, Modelling and Implementation of the Level Set Method Used in Micromachining Processes
… particular, this document is focused on wet and dry etching processes, which are widely used in the micromachining process of Micro-Electro-Mechanical Systems (MEMS). A MEMS is a system formed by mechanical elements, sensors, actuators, and electronics. These devices have gained a lot of …
-
Efficient Template-Based Nanomanufacturing of Carbon Nanotube Arrays for Cell Applications
… to fabricate these arrays. However, current etching methods used to expose carbon nanotubes from templates are expensive and time consuming. The high cost and time-consuming processes currently required to fabricate such arrays are factors which limit the commercialization of this technology …
-
Effect of Layer Transfer and Plasma Etching on The Behavior of Transition-Metal Dichalcogenide Field-Effect Transistor Arrays
… developed through mechanical exfoliation and a dry etching process. Few-layer structures (~ 3 monolayers) were fabricated using a dry etching process to thin multilayer (~ 60-90 nm thick) TMDC structures. Then, the effect of plasma etching of the TFT backchannel surface and bulk defects in the …
-
Multigate MOSFETs for digital performance and high linearity, and their fabrication techniques
… to conventional planar MOSFETs. Conventional dry etching-induced surface damage is one of the main sources of performance degradation for multigate transistors, especially for III-V high mobility materials. It is also challenging to increase the fin aspect ratio by dry etching because of the …
-
Enhanced Fabrication of Microdroplet Generator Nozzle Arrays: Optimizing KOH Etching for Microfluidic Applications
… a critical fabrication step, anisotropic wet etching of pyramidal nozzles using a basic potassium hydroxide (KOH) solution. Given the integral role of nozzle geometry in device operation, high-precision techniques including Reactive Ion Etching (RIE), Deep Reactive Ion Etching (DRIE), and KOH …
-
The Fabrication and Evaluation of Silicon MOSFETs With 0.5 to 0.1 Micron Gate Lengths
… of high resolution electron beam lithography and dry etching techniques to the fabrication of experimental silicon MOSFETs with sub 0.5 micron gate lengths. HRN, a negative electron beam resist is investigated and demonstrated to have a resolution of 0.1 microns. Two alternative dry etching …
Page 1 of 10