Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 35 for “"dry machining"”.
-
Interface Engineered Diamond Coatings for Dry Machining Applications
… the final diamond adhesion and the resulting machining performance of the tool under real manufacturing conditions is still unexplored. CVD diamond film's extraordinary qualities bring little benefit if the film fails to adhere sufficiently to the substrate. Inadequate adhesion undermines tool …
-
Evaluation of Graphite-Lubricated Dry Machining for Polymeric Hybrid Manufacturing
… Fused Filament Fabrication (FFF), yet effective dry lubrication during post-machining remains a major challenge. This study investigates graphite as a solid lubricant for the dry machining of FFF-printed PLA, applied as an aerosol suspension in isopropyl alcohol (IPA) that evaporates to form a …
-
Evaluation of Graphite-Lubricated Dry Machining for Polymeric Hybrid Manufacturing
… Fused Filament Fabrication (FFF), yet effective dry lubrication during post-machining remains a major challenge. This study investigates graphite as a solid lubricant for the dry machining of FFF-printed PLA, applied as an aerosol suspension in isopropyl alcohol (IPA) that evaporates to form a …
-
Predictive Modeling of Near Dry Machining: Mechanical Performance and Environmental Impact
… tool performance in turning process under near-dry condition. Near dry machining refers to the use of a very small amount of cutting fluid in the machining process. In order to implement the near dry machining technology, this dissertation develops the analytical models for both tool life and …
-
APPLICATION OF SUPERABSORBENT COOLANT AS A NOVEL APPROACH TO SEMI-DRY MACHINING
… a significant role in manufacturing processes. Machining certain materials is impossible without them. Due to high temperature and friction during cutting operations, proper cooling and lubrication are necessary to improve the efficiency, quality of the final workpiece and to reduce tool failure …
-
DEVELOPMENT OF ADAPTIVE PVD COATED ADVANCED COMPOSITE (CERMET) TOOLS FOR HIGH-SPEED DRY MACHINING OF STAINLESS STEEL
… strength, toughness, and corrosion resistance. Machining stainless steel is challenging due to its high work hardening tendency, low thermal conductivity, and ductility of the material resulting in built-up edge formation. Machining stainless steel at lower cutting speeds must be performed with …
-
A Study on the Sustainable Machining of Titanium Alloy
… of Ti-6Al-4V for conventional flood coolant machining and sustainable dry machining. The effect of cutting speed, feed rate, and depth of cut on machining performance has been evaluated for both conditions. The machining time and surface roughness were found to be lower in dry machining …
-
Performance of minimum quantity cooling (MQC) when turning aluminum alloy 6061-T6 : surface roughness, tool temperature and aerosol emission
… are used to evaluate the performance of machining processes. When material removal rate increases, the higher tool temperature is anticipated and therefore, better cooling is required. To reduce the heat effects on cutting tools and therefore improve the life, an efficient and cost …
-
Performance Evaluation of CBN Tools in High-Speed Dry Turning of AISI 1018 Low Carbon Steel
… the process eco-friendly by implementing a dry machining condition is the essential goal of this study. Built-up-edge (BUE) is often formed in the low-carbon-steel machining process, which, results in poor surface finish and short tool life. The high-speed-machining technique can be used to …
-
Influência da refrigeração criogênica na vida da ferramenta de PCBN e na integridade superficial do aço ferramenta D6
… AISI D6 steel and compare the results with dry machining. Surface hardness, hardened layer thickness, surface residual stress, surface roughness, tool wear and chip morphology have been the output variables. The results have showed that the cryogenic cooling has been able to reduce tool wear …
-
THE INFLUENCE OF CRYOGENIC MACHINING ON SURFACE INTEGRITY AND FUNCTIONAL PERFORMANCE OF TITANIUM ALLOYS FOR BIOMEDICAL AND AEROSPACE APPLICATIONS
… strength and low thermal conductivity. Cryogenic machining is a severe plastic deformation (SPD) processes which uses liquid nitrogen as the coolant to take away the heat generated during machining in a relatively short time. Cryogenic machining can significantly reduce the cutting temperatures at …
-
Estudo do desempenho de nanolubrificantes no torneamento do aço-ferramenta AISI D6 temperado e revenido
Emulsions based on mineral oil are widely used in machining processes because their appropriate lubri-cooling properties. Nevertheless, the use of these cutting fluids has been questioned because they can cause damage to the environment and the workers’ health. This issue has motivated the …
-
NANO-MECHANICAL CHARACTERISTICS OF WEAR RESISTANT PVD COATINGS IN RELATION TO WEAR PERFORMANCE OF CUTTING TOOLS DURING HARD END MILLING OF H13 TOOL STEEL
… coatings are AlCrN-based, they are used for wet machining and the other family is based on TiAlCrSiYN coating and are used for dry machining of H13. It was shown that there is a strong potential for further advancement in the wear performance of the coatings by improving the coating architecture …
-
CONTROL OF TRIBOFILMS FORMATION IN MACHINING HARD MATERIALS
… and surface treatment technology relevant to machining. The central goal of cutting tool technology is to increase productivity while simultaneously reducing cost and meeting the quality targets of the machined parts. This thesis considers a nano-tribological approach to explain some of the …
-
Fundamental tool wear study in turning of Ti-6Al-4V alloy (Ti64) and nano-enhanced Minimum Quantity Lubrication (MQL) milling
… by any other alloys in some applications. In machining of Ti alloys, however, the low thermal conductivity and high hardness exposes cutting tools to high temperatures and cutting forces, which often fracture the cutting tools catastrophically. More importantly, the high chemical solubility of …
-
HELICAL MILLING: AN ENABLING TECHNOLOGY FOR MACHINING HOLES IN FULLY HARDENED AISI D2 TOOL STEEL
<p>The machining of hardened steel is becoming widespread throughout the manufacturing industry owing to the benefits derived in the form of manufacturing flexibility, better product quality, and the prospect of dry machining. This coupled with developments in super hard cutting tool materials and …
-
Desenvolvimento de ferramentas de corte autolubrificantes compostas por WC-Co e lubrificantes sólidos
… reduce or eliminate the use of cutting fluid in machining operations. The use and disposal of this material at the end of its life, harms the environment. In order to reduce environmental damage, dry cutting techniques have been employed in some machining operations. This work aims to develop …
-
Sustainable machining using micro-textured cutting tools
One of the effective strategies to improve the dry machining processes is the implementation of micro-textured cutting tools. Micro-textures decrease the chip-tool contact length and thus reduce friction and heat which lead to better surface quality and longer tool life. However, micro-cutting of …
-
Torneamento do aço-ferramenta AISI D6 temperado e revenido nas condições seco, jorro e LN2: uma análise técnico-econômica
… about the environmental impacts caused by the machining industry. The use of conventional cutting fluids based on mineral oils, for example, has been approached as a practice to be overcome or, at least, minimized. However, the solution for this question comes up against technical aspects, …
-
The sensitivity of PBX 9501 and PBX 9502 to milling and sawing
… in the dimensional shape is required, and high machining speeds are desired. The limits of machining speed, driven mainly by the thermal response of the energetic material, are investigated. Specifically, the thermal response of PBX 9501 (95% HMX, 2.5% Estane, 2.5% BDNPA-F) and PBX 9502 (95% …
Page 1 of 2