Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 71 for “"dryout"”.
-
Geometry effect on post-dryout heat transfer.
… of channel shape and spacing devices on post-dryout heat transfer has been performed. Overall, very little information is available for these effects, several experiments were carried out covering only limited flow conditions and geometries. To extend the present review, studies with air flow …
-
LOCAL AND GLOBAL DRYOUT IN TWO-PHASE MICROGAP COOLING
Limitations in advancements in electronic technology and further development of new technology are due to inadequate thermal management. As Moore's Law continues to drive semiconductor technology, the capabilities of conventional thermal management methods are falling behind the constantly changing …
-
Partial singular integro-differential equations models for dryout in boilers
… flow of water and steam, along with the dryout, in steam generating pipes of a liquid metal fast breeder reactor is proposed. The model is based on thin-layer lubrication theory and thin aerofoil theory. The exchange of mass between the vapour core and the liquid film due to evaporation …
-
Advanced geometries for dryout mitigation in temhd-driven liquid lithium systems
… and risking damage. This is known as the lithium dryout phenomenon. This work adapts the standard LiMIT trench design to improve heat flux handling and eliminate the presence of lithium dryout on the free surface. Improvements to the design focus on extending the 1-D trench design to 2-D and 3-D …
-
Measurement and Prediction of the Onset of Intermittent Dryout During Blowdown Transients for Upward Annular Flow
… pressure transients on the onset of intermittent dryout in upward annular flow was experimentally investigated in order to resolve the conflict between the observations drawn from two major data sets in the literature. A delay in time to the onset of dryout at the test section exit relative to the …
-
Experimental investigation of liquid contact in the developing post-dryout CHF flow boiling regime using surface mounted thermistors
… especially immediately downstream of film dryout. These droplets are suspected to provide an important heat transfer mechanism as they impinge on the heated wall. The objective of the current study is to investigate liquid contact with the heated wall in this flow region immediately …
-
Analysis of Reverse Flow Restriction Device to Prevent Fuel Dryout During Loss of Coolant and Instability Accidents of Boiling Water Reactors
Made available in DSpace on 2017-07-06T18:55:56Z (GMT). No. of bitstreams: 3 Radaideh_Majdi_I_MS.pdf: 3702916 bytes, checksum: d9ab8cfcddc4314d381232b2ad3af591 (MD5) Radaideh_Majdi_I_MS_ABS.pdf: 113055 bytes, checksum: 6dd5088a2264a7ad7262bf468569a820 (MD5) license.txt: 4813 bytes, checksum: …
-
Analysis of reverse flow restriction device to prevent fuel dryout during loss of coolant and instability accidents of boiling water reactors
… The use of RFRD device could prevent fuel dryout damage by preventing excessive high clad temperatures due to sustained dryout without timely rewetting. For LOCA, the device is capable of containing the coolant inside the core during the blowdown and when activating the emergency systems …
-
Trace Validation of Blowdown Transients Performed in the McMaster CHF Test Facility
Modelling of intermittent dryout in vertical annular flow was done using TRAC/RELAP Advanced Computational Engine (TRACE) to validate two phase conductive and convective heat transfer, and critical flow correlations. The TRACE model is based on experiments done by Statham & Novog and include the …
-
Vaporization of thin liquid films
… of the liquid level. Two types of thin film dryout were noted on the mirrorlike surface: dryout under a dome and dryout in absence of a dome. A grooved surface appears to provide a means of obtaining a stable high heat transfer coefficient at liquid films as thin as 0.015 inch.
-
Tomography of Annular Flow in a BWR Geometry with Spacers
… of the film, mitigating the occurrence of dryout. This doctoral thesis builds around the new DoToX facility that reproduces the dryout in a lab scale manner. Within an undisturbed subchannel between four heating rods an organic model liquid is evaporated to the point of forming annular …
-
High Reynolds Number Vertical Up-Flow Parameters For Cryogenic Two-Phase Helium I
… (heat transfer coefficient, pressure drop and dryout heat flux) for high Reynolds number vertical up-flows (Re =10^5-10^6). This dissertation fills this gap and helps to expand the use of helium as an inert simulant for hydrogen. Since no prior correlations for the flow boiling parameters …
-
Performance prediction for oil contaminated carbon dioxide flow boiling heat transfer in a smooth horizontal tube
… flow boiling process, specifically under post-dryout conditions. As a result it was decided to develop a new correlation in this study to improve the flow boiling convection heat transfer coefficient predictions for both oil contaminated and uncontaminated CO2 in horizontal smooth tubes. …
-
A STUDY OF FLOW AND TEMPERATURE DISTRIBUTION AROUND A SINGLE CHANNEL IN CANDU MODERATOR
… the CT which may lead to sustained CT dryout. This can detrimentally affect channel integrity if the CT post-dryout temperature becomes sufficiently high to result in thermal creep strain deformation. The present research is focused on establishing the limits for dryout occurrence on …
-
MECHANISTIC MODELLING OF CRITICAL HEAT FLUX ON LARGE DIAMETER TUBES
… fluid is low, this heat flux spike can cause dryout of the CT. This can detrimentally affect channel integrity if the CT post-dryout temperature becomes sufficiently high to result in continued thermal creep strain deformation of both the PT and the CT. A comprehensive mechanistic model is …
-
The feasibility of using supercritical carbon dioxide as a coolant for the CANDU reactor
… reactor has the advantage of avoiding dryout as in gas-cooled reactors, and the advantage of low coolant-circulation power as for liquid-cooled reactors. As a result of eliminating dryout, the maximum operating temperature of the fuel sheath can be increased to 1021°F (550°C) for …
-
Internal Thermal-Hydraulic Dynamics of Sodium Heat Pipes During Operating Limit Transients
… work experimentally investigated frozen startup, dryout, and rewetting transients, as well as non-condensable gas (NCG) effects, internal dynamics, and coupled thermal-hydraulic behavior. This work provides high-fidelity validation data and insight into heat pipe behavior during transients and …
-
Internal Thermal-Hydraulic Dynamics of Sodium Heat Pipes During Operating Limit Transients
… work experimentally investigated frozen startup, dryout, and rewetting transients, as well as non-condensable gas (NCG) effects, internal dynamics, and coupled thermal-hydraulic behavior. This work provides high-fidelity validation data and insight into heat pipe behavior during transients and …
-
Internal Thermal-Hydraulic Dynamics of Sodium Heat Pipes During Operating Limit Transients
… work experimentally investigated frozen startup, dryout, and rewetting transients, as well as non-condensable gas (NCG) effects, internal dynamics, and coupled thermal-hydraulic behavior. This work provides high-fidelity validation data and insight into heat pipe behavior during transients and …
Page 1 of 4