Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 26 for “"dynamic; yield"”.

  1. Investigation of Taylor impact test of isotropic and anisotropic material through geometrical characteristics of specimens

    … to determine the plastic distributions and the dynamic yield stresses of specimens. A raise in yield strength is found in the copper alloy during the impact. It means that material properties of the copper alloy are sensitive to high strain rate. Yet such phenomenon is not found in the 2195-T8 …

    alabama Repository record for Investigation of Taylor impact test of isotropic and anisotropic material through geometrical characteristics of specimens (opens in a new tab)

  2. Effect of strain rate on material properties of sheet steels and structural strengths of cold-formed steel members

    … strengths of stub columns and beams subjected to dynamic loads. Three sheet steels with nominal yield strengths ranging from 35 to 100 ksi were studied under different strain rates. A total of 124 tensile coupons and 54 compressive coupons were tested in this phase of study. The structural …

    must-thes Repository record for Effect of strain rate on material properties of sheet steels and structural strengths of cold-formed steel members (opens in a new tab)

  3. Essays on yield curve models with markov switching and macroeconomic fundamentals

    … and United Kingdom. In particular, using a dynamic factor yield curve model, the three essays of this dissertation investigate the macroeconomic sources of parameter instability in the US and UK term structure. First, this dissertation explores if parameter instability in the term structures …

    alabama Repository record for Essays on yield curve models with markov switching and macroeconomic fundamentals (opens in a new tab)

  4. Using Alternating High-Shear and Rest-Time Environments to Examine the Build-up of Localized Yield Stress in Mineral Slurries of Nickel Laterite

    … macro networks during rest time and may exhibit yield stress and thixotropic behavior where the shear forces are low, causing an inactive surface zone. Nickel laterite slurries are empirically found to lie in the extremis of rheological challenges for mineral transport and processing …

    sask Repository record for Using Alternating High-Shear and Rest-Time Environments to Examine the Build-up of Localized Yield Stress in Mineral Slurries of Nickel Laterite (opens in a new tab)

  5. Hypervelocity impact on strain-rate sensitive shielded plates

    … subjected to a blast load, one determines the dynamic yield strength of the plate material. The analysis is based on a theory for the expansion of the fragmented projectile and on a simple failure criterion. Curves are presented for the critical projectile radius versus the projectile velocity, …

    rice Repository record for Hypervelocity impact on strain-rate sensitive shielded plates (opens in a new tab)

  6. A method to determine the ballistic limits of shielded plates subjected to hypervelocity impact

    … deformations allows one to determine the dynamic yield strength of the plate material. It is assumed that the shields can be replaced by a single equivalent shield, and that the debris cloud produced by the impact expands according to the theory of Swift. A strain criterion is imposed and …

    rice Repository record for A method to determine the ballistic limits of shielded plates subjected to hypervelocity impact (opens in a new tab)

  7. Mechanics of Aggregated Alumina Suspensions: Behavior Under Shear and Compression

    … of an applied normal load increases the measured dynamic yield stress. However, the magnitude of this increase is very small, suggesting that Coulombic friction plays a very minor role in the mechanical response of such aggregated systems. This study has wide-ranging implications for the design …

    uiuc Repository record for Mechanics of Aggregated Alumina Suspensions: Behavior Under Shear and Compression (opens in a new tab)

  8. The Relationship of Size Class Distribution to Migratory Behavior in Brown Shrimp (Penaeus aztecus) in Pamlico Sound, North Carolina

    The potential of migratory timing information for dynamic yield estimation in the North Carolina brown shrimp fishery has been shown. The present research investigates the influence of size class distribution on the quantitative characterization of migratory timing in the brown shrimp. Catch and …

    odu Repository record for The Relationship of Size Class Distribution to Migratory Behavior in Brown Shrimp (Penaeus aztecus) in Pamlico Sound, North Carolina (opens in a new tab)

  9. Dynamic analysis of an overhead crane carrying a canister by finite element method

    … This model is used to perform the static, dynamic and impact analysis using the finite element software COSMOS/M. Static results are compared with simplified model solutions to verify the accuracy of the finite element model. Frequency analysis is also performed to determine the first six …

    unlv Repository record for Dynamic analysis of an overhead crane carrying a canister by finite element method (opens in a new tab) Download PDF for Dynamic analysis of an overhead crane carrying a canister by finite element method (opens in a new tab)

  10. Relationships between MIBANT bend angles and selected material properties of pallet fasteners

    … solid when impact loaded was used to relate the dynamic yield strength and MIBANT bend angle of driven steel fasteners. Static yield strength values for pallet nails were found to values (p > 0.0001 be linearly related to the dynamic 2 and R² = 0.950) and hence MIBANT bend angles. Static yield …

    vt Repository record for Relationships between MIBANT bend angles and selected material properties of pallet fasteners (opens in a new tab)

  11. Nonlinear rigid-plastic analysis of stiffened plates under blast loads

    … interaction relations, otherwise known as yield curves. A blast loaded, one-way stiffened plate is modelled as a singly symmetric beam comprised of one stiffener and its tributary plating, and subjected to a uniformly distributed line load. For a stiffened plate having edges fully …

    ubc Repository record for Nonlinear rigid-plastic analysis of stiffened plates under blast loads (opens in a new tab) Download PDF for Nonlinear rigid-plastic analysis of stiffened plates under blast loads (opens in a new tab)

  12. Quality by Design in Twin Screw Granulation

    … model granules having a wide range of material dynamic yield strengths (DYSs) in conveying and distributive mixing element screw configurations. The process parameter dependence was quantified using the dimensionless powder feed number. Daughter size distributions and survivor pellet shape …

    purdue-thes Repository record for Quality by Design in Twin Screw Granulation (opens in a new tab)

  13. In Depth Analytics of Vehicle-Vehicle and Vehicle-Pedestrian Conflicts across Various Conditions

    … such as blank-out "No Right Turn" signs and dynamic "Yield to Pedestrians" signs are proposed to enhance pedestrian safety and optimize advanced driver-assistance systems (ADAS). These findings highlight the importance of data-driven safety interventions, helping to develop adaptive safety …

    ucf Repository record for In Depth Analytics of Vehicle-Vehicle and Vehicle-Pedestrian Conflicts across Various Conditions (opens in a new tab)

  14. The effects of particle shape, size, and interaction on colloidal glasses and gels

    … theoretical calculations. Nonlinear rheology and yielding behavior of repulsive and attractive spheres and anisotropic particles are examined and understood in terms of barriers constraining motion. The barriers are due to interparticle bonds or cages constraining translational or rotational …

    uiuc Repository record for The effects of particle shape, size, and interaction on colloidal glasses and gels (opens in a new tab)

  15. Formwork pressure and rheology of self consolidating concrete

    … and cement paste mixes like workability, static yield stress gain and temperature change over time were evaluated and correlated with the formwork pressure data. The mix parameters for the concrete, mortar mixes like water to cementitious ratio, the addition of fly ash, aggregate content, maximum …

    uiuc Repository record for Formwork pressure and rheology of self consolidating concrete (opens in a new tab)

  16. Fast rate fracture of aluminum using high intensity lasers

    … shock experiments were performed to study the dynamics of various solid state material processes, including shock-induced melt, fast rate fracture, and elastic to plastic response. Fast rate fracture and dynamic yielding are greatly influenced by microstructural features such as grain …

    texas Repository record for Fast rate fracture of aluminum using high intensity lasers (opens in a new tab)

  17. Mechanical Behaviour of Cold-formed Hollow Structural Section Material

    In this thesis, the static and dynamic properties of cold-formed Rectangular Hollow Sections (RHS) produced by different manufacturing techniques (direct-forming versus continuous-forming; heat-treated versus non-heat-treated) were studied comparatively for the first time. The aim of this research …

    toronto-retro Repository record for Mechanical Behaviour of Cold-formed Hollow Structural Section Material (opens in a new tab)

  18. Rheological characterization of complex drilling fluid and the effects on drilling hydraulics

    … (TVP) suspension. It is observed that high yield stress and flow rate do not guarantee efficient hole cleaning. In most cases, high yield stress deteriorates cuttings transport. A large stress overshoot improves cuttings transport, though the distinction between the static and dynamic yield …

    texas Repository record for Rheological characterization of complex drilling fluid and the effects on drilling hydraulics (opens in a new tab)

  19. Rectangular Hollow Sections Subject to Blast Loading

    … cold-formed steel under elevated strain-rates. Dynamic tensile tests have hence been performed on sub-size tensile coupons taken from the flats and corners of cold-formed RHS members. Dynamic yield stresses were obtained at strain rates from 0.1 to 18 s-1. The dynamic increase factor was …

    toronto-retro Repository record for Rectangular Hollow Sections Subject to Blast Loading (opens in a new tab)

  20. Utilising a water-based spraying method to improve 3D printed concrete

    … The analytical model, which uses the material's dynamic yield stress, proved to be a robust tool for predicting the buildability and failure mode of 3D printed structures, aligning well with experimental results. This research validates a practical and simple method for improving the performance …

    stellenbosch Repository record for Utilising a water-based spraying method to improve 3D printed concrete (opens in a new tab)

Page 1 of 2