Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 63 for “"dynamic modulus of elasticity"”.
-
Static and dynamic modulus of elasticity of hardboard
… (M.S.)--Michigan State University. Department of Forest Products, 1964
-
A Study of the Correlation Between Static and Dynamic Modulus of Elasticity on Different Concrete Mixes
… to determine the relationship between the Static Modulus of Elasticity and the Dynamic Modulus of Elasticity in various concrete mixes. The Static Loading Test was used to measure the strains associated with applied stresses on cylindrical concrete specimens to determine the Static Modulus. An …
-
A study of the effect of cracks on the resonant frequency and dynamic modulus of elasticity of insulating brick by the dynamic testing method
Vertical cracks normal to the major axis of a standard fire brick will cause a lowering of the dynamic modulus of elasticity calculated.
-
Application of impact resonance method for evaluation of the dynamic elastic properties of polypropylene fiber reinforced concrete
For evaluation and quality control of concrete structures, the impact resonant frequency method is widely accepted for monitoring structure in-service properties and detecting structural damage. Common defects in concrete include consolidation problems during casting and development of micro-cracks …
-
A study on the effect of casting and curing temperature on the mechanical properties of concrete.
… is above 10°C. However, construction of offshore Arctic structures will usually take place at temperatures close to that of the sea at approximately 0 to 4°C; and hence information on the influence of temperature during mixing, placing and curing on the development of concrete …
-
Durability of Flax Fibre Reinforced Concrete
… with fibres made from glass and plastic in terms of its resistance to plastic shrinkage cracking. However, flax fibres alone have been found to lose their strength and stiffness when subjected to simulated concrete pore solutions. This thesis describes an experimental program to measure the …
-
Estudo de argamassas de revestimento com resíduo de scheelita
The state of Rio Grande do Norte has a large concentration of scheelite, the main source of tungsten, an important chemical element for production in various industries. When extracting the raw mineral material, tons of residue are generated and lunges in the environment. This work aims to analyze …
-
Dynamic Analysis for Characterization of Novel Biomass Based Composities
… from forests constitute a significant asset of Mississippi State. Forests cover around 19.7 million acres (65%) of the total land area of Mississippi. Total annual economic impact of Mississippi’s forest products is about $17 billion. Creation of high-value products will lead to a number of …
-
The Effects of Soil Parent Material and Nitrogen Fertilization on Tree Growth and Wood Quality of Douglas-fir in the Pacific Northwest
The influence of four soil parent material types (SPMs) and nitrogen fertilization treatment (224 kg N/ha) on Douglas-fir (Pseudotsuga menziesii (Mirb.) plantation growth and wood quality was studied on seven sites across western Washington and Oregon. Six aspects regarding wood quality were …
-
Engineering properties of concrete in a sulfate environment
1.2 Objective This study investigated the effects of sulfate exposure on the mechanical properties of Portland cement concrete. Concrete specimens cast from mixtures composed of locally available aggregate and cement were exposed to a 10% (67,600 ppm) sodium sulfate solution for periods up to 2 …
-
Characterizations of concretes with alkali-activated binder and correlating their properties from micro- to specimen level
The manufacturing of portland cement (PC), the main binder of concrete, generates large amount of CO2 (a greenhouse gas), cement kiln dust (solid waste), and consumes significant amount of heat energy. Alkali-activated binder (AAB) is increasingly being considered as an environmentally friendly or …
-
Flexural behavior of a glass fiber reinforced wood fiber composite
The static and dynamic flexural properties of a wood fiber matrix internally reinforced with continuous glass fibers were investigated. When modelled as a sandwich composite, the static flexural modulus of elasticity (MOE) of glass fiber reinforced hardboard could be successfully predicted from the …
-
Sonic testing of concrete : a correlation of pulse velocity to the mechanical and physical properties of Winnipeg concretes
This dissertation deals with the assessment of a non-destructive test method, namely the sonic pulse velocity method, as applied to concretes of known physical and mechanical properties. Concrete produced by two Winnipeg concrete producers, Building Products and Supercrete, was investigated using …
-
Durability of ternary blended cements in bridge applications
The long-term performance of bridge components can be greatly influenced by the durability parameters including freeze-thaw and chloride permeability resistance. Both freeze-thaw resistance and chloride permeability resistance were tested along with the compressive strength of 24 high performance …
-
A Study of the Thermo-Mechanical Behavior of 18Ni-9Co-5Mo Maraging Steel
… been conducted to more fully develop the family of high strength Maraging Steels first introduced about 1960. Because of the sensitivity of internal friction to structural changes within materials, even on the atomic level, this test method was used to help explain some of the effects of …
-
EVALUATION OF ULTRASONIC PULSE VELOCITY METHOD
Some basic properties of concrete made with local materials were studied in this programme. It has been established that concretes made with granite and natural sand as coarse and fine aggregates respectively show consistent values of density, pulse velocity, dynamic and static modulus of …
-
Short & long term properties of self-consolidating concrete incorporating fly ash and local aggregate
… examine the mechanical and durability properties of SCC to gain insights for the design and implementation of SCC in structures. This thesis presents the mechanical and durability experiments used for characterization and acceptance of SCC. Because there are many normally vibrated concretes (NVC) …
-
Exploratory thermal modification of some West Coast Canadian wood species
Wood has been a cornerstone of construction for centuries because of its excellent strength-to-weight ratio, sustainability, and versatility. However, its natural tendency to absorb moisture, change dimensions with varying humidity, and deteriorate biologically can limit its use in high-performance …
Page 1 of 4